300 kw to used for sale

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm spindle drive: 46 kW Feed: 10000 mm/min Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of Lo ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 40 mm -Type: 3003284-1 1-5 -Piston rod: Ø 32 mm / M22 -Hole: Ø 18 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 82 x 330 mm -Weight: 5.7 kg/piece

Try square, locksmithsquare, hair square, precision hair square -Stop angle: leg length 600 x 300 mm -Dimensions: 605/300/H40 mm -Weight: 2.8 kg

Pneumatic cylinder, flat cylinder, pneumatic drive, stamp, flat cylinder -Manufacturer: Festo, flat cylinder stroke 300 mm -Type: unfortunately no longer readable -Piston rod: Ø 16 mm / M12 -Pmax: bar -Dimensions: 465/40/H70 mm -Weight: 2.1 kg

pressure: 300 t passage width: 1350 mm stroke: 500 mm column travel -side: 830 mm table surface area: 1350x1380 (1870x1380) mm table height: 1060 mm total power requirement: 45 kW weight of the machine ca.: 20 t dimensions of the machine ca.: BxTxH 2500x2000x3950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Henninger, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Dimensions: Ø 116 x 300 mm -Weight: 8.2 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Tailstock, counter bearing for dividing head, dividing head -Manufacturer: Swedturn, Type ST12 CNC 300 tailstock -Quill: hydraulically driven -Dimensions: see photos -Dimensions: 900/650/H450 mm -Weight: 265 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage -Manufacturer: Afag, linear slide electric slide -Type: ES30-300 -Stroke: 300 mm -Shaft: Ø 20 mm -Dimensions: 525/60/120 mm -Weight: 5.8 kg

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 300 x 180 mm -Quantity: 1x angle stop available -Dimensions: 305/180/H20 mm -Weight: 0.6 kg

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 300 x 200 mm -Quantity: 1x flat angle available -Dimensions: 300/200/H5 mm -Weight: 0.7 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: SMC, Compact cylinder type ECDQ2A80-300DC -Stroke: 300 mm -Piston rod: Ø 25 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 420/100/H140 mm -Weight 5.7 kg/pc.

Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 6-digit LED Display -Type: N 214.002AX01 -Item No.: 300949 -Dimensions: 130/110/H50 mm -Weight: 0.4 kg

Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Insertion height: 345 mm -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 350 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-dsi14-02-generator-300k va-used/33, , = More information =, , Year of construction: 1010, Empty weight: 2.250 kg, Type number: DSI14.02 300KVA GENERATOR

Engine Brand: SCANIA, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/219424, , = More information =, , Year of construction: 1010, Type number: DSI14.02 300 KVA GENERATOR 300 K

Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg

Machine vice, sturdy vice, drill press vice -Jaws can be moved depending on the workpiece geometry -Vise: rotatable -Jaw width: 255 mm -Clamping depth: max. 300 mm -Dimensions: 680/330/H180 mm -Weight: 95 kg

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

turning diameter: 626 mm turning length: 3000 mm control: Siemens type: 840D spindle passage: 100 mm Turret 12-fold, 12 stations: turning speeds: 2800 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with extraction

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

2000 HAIDA INTERNATIONAL D-E 702-3000K40 Testing chamber Find more here - / Contact us at -

Reflective light barrier, light barrier -11-30 V Price: per piece -Number: 8 available -Weight: 0.7 kg

Reflective light barrier, light barrier -10-30 V DC Price: per piece -Quantity: 9x Available -Weight: 0.4 kg

Sourdough mixer Kitzinger Sourmat 300 - Stainless steel sourdough stirrer - Kitzinger - Type: Sourmat 300 - 400 volts - with drain tap - on castors - Shell inner diameter: 72.5cm - Shell height inside: 64.5cm

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - / Contact us at -

Control: Mazatrol Fusion 640M Technical data: X-axis: [mm] 1740 Y-axis: [mm] 760 Z-axis: [mm] 660 Max. speed: [1/min] 10.000 spindle motor: [kW] 15 tool holder: SK 40 tool places: 30 Equipment: Chip conveyor No internal cooling (IKZ) Find more here - /

CNC lathe Type: Lynx 300 Manufacturer: Doosan Year: 2011 Control: Fanuc i Series Toolholders Machine in good condition, under power Find more here - / Contact us at -

Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 190 mm -Length: 300 mm -Height: 240 mm -Table: 140 x 300 mm -Groove width: 14 mm -Weight: 24 kg

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions -Diameter: 300 mm -Number: 2 pillows available Price: per piece -Weight: 6 kg/piece

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - / Contact us at -

Sharpening machine Vollmer CAL 300 Left hand machine Specifications: Blade width: 100-420mm Blade length: from 8500mm Blade thickness: up to 2.8mm Tooth pitch: 20-120mm The height of the teeth up to 40mm Angle of attack up to 40 degrees Abrasive disc diameter: 300m Working speed 5-30 teeth/min Power 5.4 kVA/ 4.8 kW Weight approx 1600 kg Accessory: Oil vapor exhaust and filtration system Vollmer N170 emulsion filtration system Auxiliary feed for large blades Find more here - / Contact us at -

Specifications: Maximum cutting width: 3050 mm Maximum cutting capacity steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 3500 x 2500 x 2050 mm Weight: approx. 9,5 tons

Specifications: Working length: 3000 mm Bending capacity steel: 6.0 mm Bending angle adjustment : 0 – 180° Upper beam opening: 300 mm Power: 7.5 kW Dimensions (length x width x height): approx. 4500 x 1850 x 2200 mm Weight: approx. 5 to

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Specifications: Working length: 3050 mm Distance between stands: 2690 mm Pressing force: 130 tons CNC Control: DELEM DA69 adjustable back gauge Controlled axes: Y1 / Y2; X; R; Z1 / Z2 CNC Table Bending Compensation MODUFIX clamping hydr. Tool clamping at the top and bottom Pneumatic tool displacement Angle measuring system Stroke: 365 mm Projection : 410 mm 2 pcs bending aids Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight : approx. 13 tons Accessories: Tool Condition: good condition

Inductive sensor, electronic sensor Manufacturer: IFM -Product Type: ITB 3001-BPOG -Quantity: 4x Available Price: per piece -Weight: 0.2 kg

Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IN-3004LBPOG -Quantity: 4x Available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IN5129 IN-3004-BPKG -Quantity: 2 available -Price: per piece -Weight: 0.2 kg

Standstill monitor, standstill monitor, underspeed monitor, standstill monitoring, safety relay -Manufacturer: ifm, standstill monitoring safety relay -Type: DA0001 A300/230VAC -Price: per piece -Number: 7 available -Dimensions: 55/80/H110 mm / box 150/110/H65 mm -Weight: 0.3 kg/pc.

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 300W -Length: 155 mm -Diameter: 13 mm -Weight: 0.2 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 4 kW -Input: 380/415 V 50/60 Hz -Output: 380/415V 9.0A max. 4P 50/60Hz -Weight: 8 kg

Reflective light barrier, light barrier -Type: RK 85/7-300 -240 V AC Price: per piece Quantity: 3 available -Weight: 0.5 kg

Depth gauge, caliper, vernier caliper, vernier caliper -Measuring range: 0-300 mm -Fine-tuning -long measuring jaws -Number: 4x depth gauges available -Price: per piece -Weight: 0.6 kg