We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,430 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed to the X-axis Manual speed on the X-axis Fraeskop 360° rotating Tilt table li and re rotate 30° Cowlmittel pump With vice With tool holder ER25 with some collets CE marking
used
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 300 mm Distance between centres: 380 mm Table length: 1100 mm Max. grinding diameter: 238 / 620 mm Max. grinding wheel diamter: 125 mm Longitudinal way of table Transversal way of the table: 220 mm Vertical adjustment of grinding head: 325 mm Slewing range of grinding head: horizontal: 360 ° vertical: 360 ° rotary axis of the grinding spindle head: 360 ° Grinding spindle speeds: number (steps): 2 from: 2000 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2 kW Machine´s weight about: 500 kg Overall dimensions machine: Length: 1100 mm Width: 800 mm Height: 1750 mm Various accessories: Set of collets Set of collets: ESX Lamp Tool cabinet Grinding wheel guard
used
Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer. ...
used
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding wheels: Diameter: 150 mm Width: 20 mm Bore: 20 mm Spindle speeds: up to: 2500 rpm Tool orthogonal clearance max.: 26 ° Clamping range of the tools: Width: 32 mm Height: 32 mm Voltage 50 Hz 3x: 380 Volt Power: 1.0 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 820 mm Width: 564 mm Height: 1215 mm Various accessories: Inclinable tool holder Coolant system Lamp
used
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding wheels: Diameter: 175 mm Width: 20 mm Bore: 20 mm Spindle speeds: up to: 2800 rpm Tool orthogonal clearance max.: 26 ° Clamping range of the tools: Width: 32 mm Height: 32 mm Voltage 50 Hz 3x: 380 Volt Power: 1.0 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 820 mm Width: 564 mm Height: 1215 mm Various accessories: Inclinable tool holder Coolant system Lamp
used
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding wheels: Diameter: 175 mm Width: 20 mm Bore: 20 mm Spindle speeds: up to: 2800 rpm Tool orthogonal clearance max.: 26 ° Clamping range of the tools: Width: 32 mm Height: 32 mm Voltage 50 Hz 3x: 380 Volt Power: 1.0 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 820 mm Width: 564 mm Height: 1215 mm Various accessories: Inclinable tool holder Coolant system
used
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 115 mm Distance between centres: 500 mm Max. grinding length: 320 mm Axial motion: Longitudinal: 340 mm Vertical: 300 mm Slewing range of grinding head: vertical: 360 ° Grinding spindle speeds: from: 3650 rpm up to: 6100 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 700 kg Overall dimensions machine: Length: 1000 mm Width: 905 mm Height: 1500 mm Various accessories: Set of grinding wheel arbors Tailstock Lamp
used
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding wheels: Diameter: 175 mm Width: 20 mm Bore: 20 mm Spindle speeds: up to: 2800 rpm Tool orthogonal clearance max.: 26 ° Clamping range of the tools: Width: 32 mm Height: 32 mm Voltage 50 Hz 3x: 380 Volt Power: 1.0 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 820 mm Width: 564 mm Height: 1215 mm Various accessories: Inclinable tool holder Coolant system Lamp Plexi splash-guard
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle speeds: from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm
used
x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm tool taper: SK 40 fixed table: 400 x 1000 mm addition table: 260 x 1000 mm turning speed range: 40 - 2000 U/min feed range: 10 - 500 mm/min total power requirement: 3 kW weight of the machine ca.: 2000 kg dimensions of the machine ca.: 1775/1880/1850 mm • fixed angle table, • 3-axis-digital display ACU-RITE • 5 tool tapers, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm
used
Technical data Centre height: 85 mm Longitudinal way of table: 30 mm Transversal way of the table: 30 mm Grinding spindle speeds: from: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.00 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 1100 mm Width: 1000 mm Height: 1400 mm Various accessories: Universal Vice swivelable: 40mm Centering device
used
SPECIFICATIONS: Machining max mm: 330 Spindle diameter mm: min 100, max 300 Voltage: 220 V Tool measuring and display system for optical measurement of tools
used
Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering ...
used
Tool grinding machine - steel grinding machine make SIMON type L 15Machine -No: 4924/4925 Year 19634 stationsEngine speed: 1400/2800 rpm.Number of stations: 4Power connection: 380 V / 50 HzDrive power: 0.55 / 0.9 kWOutside dimensions approx: 1120 x 510 x 1600 mmWeight approx: 300 kgWith- 2 lampsused and in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Lapping machine make WOLTERS type FL 3Machine -No: 120Lapping disk diameter: 300 mmSpeed of the lapping disc: 220 rpm.Drive power: 0.4 kWOutside dimensions approx: 500 x 1000 x 970 mmWith- a lot of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Double grinder bench, make GREIF type D 30 - 5 - 5 KTMasch. -No: 208478, year of construction 1984Technical specifications:Grinding wheel size: 300 x 50 x 76 mmCut-out: 130 x 30 mmSpeeds: 1500 rpm.Drive power: 1.5 kWPower connection: 380 V / 50 HzWeight: 200 kgExternal dimensions: 1100 x 450 x 1500 mmWith- K 36 + K 60 grinding wheels- Tool support 260 x 165 mm- Tool support can be tilted- coolant device- Dry and wet grinding- Eye protection glassused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tool grinding machine make AGATHON type 175 DIAMachine -No: 8091723 built in 1984Technical specifications:Grinding wheels with double cup diameter: 175 mmSpindle speed: 2700 rpm.Workpiece infeed: 0.01 mmFine angle adjustment max .: 26 degreeConnected load: 1.7 kWWeight approx: 300 kgDimensions approx: 1000 x 600 x 1500 mmWith- cooling device- suction- Equipmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Multi spindle drilling head make SAWAS type SBS Gr. IIFabr. -No: 10957 Year 1995Number of taps: 6is: 4Spacing of the drill spindles: 65 mmPosition of the spindles: m lineGear ratio: 2External dimensions approx: 400 x 300 x 350 mmWith- Adapter flange for Alzmetall SB machinesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Maho MH 600 Universal Milling Machine Specification Manufacturer Maho Type MH600 Year. Unb. Axis displacement X-axis 400 mm Y-axis 210 mm Z-axis 300 mm Main spindle speed 20 - 4000 rpm Tool holder ISO-40 Extras Vertical head with pinole Various tool holders Universal table Digital display 2-axis Machine documentation Coolant set.
used
Milling machine, universal milling machine, tool milling machine -Clamping table: 300 x 800 mm -X/Y/Z 500/285/H430 mm -Spindle mount: SK40 -Speeds: from 40 to 2000 rpm -Power supply: 8-400mm/min - Rapid traverse: 600 mm/min -Cooling unit -Dimensions: 1430/1200/H2000 mm -Weight: 1594 kg
used
Deckel Maho DMF 300 Linear, built in 2002 TECHNICAL INFO: CONTROLS: CNC SIEMENS Sinumerik 840 D power line, TRAVELS: X: 3,000 mm Y: 560 mm Z: 720 mm Spindle mount SK40 Spindle speed: max 12,000 rpm (limited to 6,000 by gearbox) Tool magazine for 40 tools Operating hours: 21,865 Spindle hours: only 9,320 Very reliable, stable and good machine! No maintenance backlog! - In recent years, small items such as belt pulleys, hydraulic accumulators, scrapers, linkages have been added, regardless of the maintenance positions - In 2018 a new Z-axis ball screw came in. The engine gearbox was also overhauled - Rotary table 560mm (4th axis) for assembly also available and part of the sale The orientation of the Hirth toothing when swiveling would have to be readjusted. However, we only use the machine as ...
used
- DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s INSERT CONUS MK5 IT WAS USED BY LATHE CNC DOOSAN PUMA
used
Dimensions (LxWxH) approx. 2,600 x 1,000 x 1,600 mm Weight approx. 1,300 kg machine number 833, Digital display chalice PICO Version A 23, Clamping length approx. 2000 mm, clear width in the passage (portal) 740 x 320 mm
used
Univ. Swivel-tilt-turntable probably DECKEL Universal Tool Milling Machine Attachment Table Size: 700 x 400 mm Groove width: 14 mm Slot spacing: 46 mm Mounting plate: width 550 mm x height 300/240 mm - Swivel and tilt +/- 30- Rotatable 360 Weight approx. 140 kg; used
used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 33064 Year of construction approx. 1960 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 stages Motor power 1.1 and 1.4 kW Mains connection 380 volts, 50 Hz feed in the X and Y axes - Pinol shift on the vertical milling head - fixed angle table - Coolant device with mechanical pump in the machine foot - adjacent control cabinet with cable plug connection Space requirement L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg good condition Machine new Painted in original grey tone; used
used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 52185/08 Year of construction 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.4 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Two motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table coolant device in the machine foot - adjacent control cabinet - counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm Weight approx. 1000 kg very good condition; used
used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 51265/08 Year of construction approx. 1967 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.6 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Spindle speed over 2 motor speeds and 8 gear stages - Pinole shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg good condition; used
used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm. 12 stages Motor power 1.0 and 1.5 kW pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinole shift on the vertical milling head 60 mm- swivel, rotate and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used
used
Control Siemens Sinumerik 810 D Travel x/y/z 350 mm / 240 mm / 340 mm Drive power // Tool holder 6.3 kW / 10 kW // ISO 40 Spindle speed range of the working spindle 20 – 6,300 rpm Connected load / weight of the machine 15 kW / 2 t Manually operated rotary table C-axis 360°/swivel range B-axis +105/-15° table load / table clamping surface 100 kg / 400 mm x 290 mm Accessories: various holders and tools according to photo Remarks: Error at startup, possibly control defective, not operational
new
Manufacturer : RGX-Tools Type: RGX2-65/101-32/2(DO) Condition : new Warranty : 12 months 14 pieces in stock for immediate delivery Description: BMT 65 radial tool holder, with internal cooling for DOOSAN; Hyundai Wia... Axial version ( straight holder ) Manufacturer: RGX- Tools Item number: RGX2-65/101-32/2(DO) Tool holder: Collet ER 32 Internal cooling : yes ; 20 bar Compatible with the following machines Chevalier ᐳ FBL-300 DOOSAN ᐳ PUMA 2100/2600M/LM/MS/LMS DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY DOOSAN ᐳ PUMA MX 2000/2500 DOOSAN ᐳ PUMA MX 2600 T/ST DOOSAN ᐳ PUMA TT 2000/2500 M/S/Y Focus CNC ᐳ FBL 300MC HAAS ᐳ DS-30Y HAAS ᐳ ST-20/25/30/35 Y HAAS ᐳ ST-20/25/30/35 Y Hyundai ᐳ SKT 200/250 TTSY Johnford ᐳ SL35/65 BMT65 Leadwell ᐳ LTC 25iM (BMT65) SMEC ᐳ PL 20/25/35 SMEC ᐳ SL 2000/ ...
used
SECOND-HAND TOP BOTTOM WIDE BELT SANDER SAC SUERI MOD. 4R300 - Working width 300 mm - Max thickness 150 mm - Min. thickness 5mm - Min. pieces length 240 mm - 2 Top Belts: Roller + Roller - Diam. 240 mm - 2 bottom belts: roller + roller - diam. 240 mm - Feeding speed 4-16 m/min - N. 4 motors 4 Kw each - CE rules (year 1998)
used
Span 177 Meter ; Lifting Height 74 +12 Meter; 2 x 300 Ton Hoists; Main Hoist 350 ton, Auxiliary. Hoist 350 Ton ; Service Crane 6,3 Ton (2008) Capacity: Span 177 Meter ; Lifting Height 74 +12 Meter Make KONE-WIA Year 2008
new
: neu : ca. 4 Monate ab Auftragse : Taiwan : 46400 € : 951.2 € : 40 -3200 U/min : ISO 40 : 600 x 500 x 400 mm : 1000 x 500 mm : 3,75 kW : 1814 kg : 1000 mm/min : 8 : 14 x 63 mm : 300 kg : 600 mm : 500 mm : 400 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 40 - 3200 : 40 - 3200 : +/- 90° ° : 100 mm : manuell : 3,75 kW : 1200 x 250 mm : 160 - 660 mm : 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automati ...
used
Machine type: Tool milling machine Manufacturer: DECKEL Model: FP 1 Active 3-Axis Year of construction: 1984 Condition: very good Type of offer: used machine Specifications: Table: 600 x 210 mm Speed range: 40 - 2000 rpm. Spindle mount: SK 40 Travel range: x = 300 mm y = 160 mm z = 340 mm Propulsion: 1.6 / 2.0 kW Remark: Heidenhain TNC 113, 3-axis active digital display, Safety cabin with electrical shut-off, coolant device, Machine vice with turntable 110 mm jaw width, Collet chuck SK 40 with 13 collets 5 - 25 mm, 5 tool holders SK 40, infinitely variable feed control and rapid traverse in x, y, z Weight: 850 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.
used
Pear 1FC4 Tool Milling Machine Manafacture: PEAR Model No.: 1FC4 X-axis (longitudinal): 200 mm Y-axis (transverse): 300 mm Z-axis (vertical): 155 mm Ratio: 1:1 Table dimensions (mm x mm): 600x400 Length x width x height: 1300 × 1300 × 2300 mm Collet bore mm: 4,6,8,10,12 Spindle speed: up to 12,000 rpm Distance between table and mandrel: 530 mm Engine hp: 0.75 RPM: 700-4400 Weight: approx. 1800 kg More items - new and used - can be found in our shop! International shipping costs on request!
used
Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Manufacturer [manufacturer]: Schneeberger Type [ type]: Aries ENP4 Control unit: Fanuc control, 2 CNC axes, simultaneous interpolation 10.4" LCD color touchscreen, RS232 Baujahr[construction year]: 10/2008 Tool and cutter grinder Note: Ideal for tooling and sharpening Optimal grinder for grooving, circumferential, flank, front, rear and flank surfaces Axes Longitudinal travel X mm 400 (CNC) Transverse travel Y mm 260 (CNC) Vertical travel Z mm 300 (CNC) Workpiece rotation A degree free (CNC) C-axis, manual, position indicator integrated in the control unit. Resolution of the measuring system: 0.001°, grinding head ±180° rotatable Center height mm 210 Landing cone ISO50 Spindle Drive power kW 2.2 / 7.5 Double spindle HSK 50 - (2 + 2 grinding wheels) Spindle speed 1/min 9000 Grinding wheel diameter ...
used
Tolerance tester, indoor measuring device, measuring table with column guide FEINMESSZEUGFABRIK SUHL Tolerance tester for bores Measuring range: 10 - 20 mm Working surface: 80 x 40 mm height max: 95 mm with wooden box Dimensions: 300 x 260 x 450 mm
used
On a Multigrind® CU, a wide variety of Precision tools for machining absolutely dimensionally accurate and produce economically. Of course, other components can also be sanded. Only approx. 6,500 h operating hours Workspace: X-axis 630 mm Y-axis 465 mm Z-axis 630 mm C-axis rotation angle 300° A - Axis SK50 (rotary axis) Option HSK80 Grinding spindle HSK50 X3 axis pneumatic Dressing unit with structure-borne noise Tool changer Workpiece changer for 4 pallets integrated 2nd probe for calibrating the grinding wheels Extinguishing system Kraft & Bauer Extraction LTA Coolant system Turbo Separator Clamping devices according to customer requirements and requirements Software package depending on process requirements On-site commissioning and training Financing of the machine possible! Delivery possible in Q4 / 2023
used
Tool holder for slotting machine PAGUS chisel flap: 140 x 85 mm 2x T-slot: groove width: 16 / 30 mm, groove depth: 21 mm 100 mm height adjustable, +/- 15° swivelling Flange diameter: Ø 230 / 80 mm shaft diameter: Ø 18 mm Wavelength: 48 mm Groove width: 6 mm ring groove: Ø 190 / 150 mm, depth: 23 mm used, tested ! Dimensions: 300 x 270 x 520 mm
used
Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 ...
used
Tool Grinding Machine HENDEL+KUBASCH WBV Year: 1961 Grinding diameter max: 50 mm Grinding length: 250 mm Workpiece length: 300 mm Motor: 0,0,7 kW 380 V used, tested ! Dimensions: 1000 x 1000 x 1400 mm
used
Ripper tooth chain, saw chain, 4 pieces WMW, VEREINIGTE WERKZEUG-FABRIKEN GERINGSWALDE ( VWF ) 15 x 2 x 33 Division: 15 mm Number of drive links: 33 Drive link width: 2.0 mm Cutting width: approx. 9 mm New ! Dimensions ( packaging ): 300 x 130 x 70 mm
used
Planed tooth chain, saw chain, 4 pieces WMW, VEREINIGTE WERKZEUG-FABRIKEN GERINGSWALDE ( VWF ) 10.25 x 1.6 x 68 pitch: 10.25 mm Number of drive links: 68 drive link width: 1.6 mm cutting width: approx. 9 mm New ! Dimensions ( packaging ): 300 x 130 x 70 mm
used
Ripper tooth chain, saw chain, 4 pieces WMW, VEREINIGTE WERKZEUG-FABRIKEN GERINGSWALDE ( VWF ) 12 x 1.6 x 55 Pitch: 12 mm Number of drive members: 55 Drive link width: 1.6 mm cutting width: approx. 9 mm New ! Dimensions ( packaging ): 300 x 70 x 70 mm
used
General: Year of construction: 1998 Travel: X 350 mm, Y 250 mm, Z: 300 mm Table size 500 x 400 mm Workpiece dimensions Max. 500 kg Weight approx. 2,350 kg Other equipment and included accessories: Tool changer Tool holder system 3R
new
range L-W-H: 790 x 460 x 960 mm weight: 70 kg : 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4 premium ratchet. 1/4 knee joint 45 mm. 1/4 extension 100mm. 1/4 socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 premium ratchet. 3/8 knee joint 55 mm. 3/8 extension 150mm. 3/8 socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 premium ratchet. 1/2 knee joint 75 mm. 1/2 extension 125mm. 1/2 Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2 Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22 ...
used
SPECIFICATIONS: Work table dimensions: 600 x 300 mm (extendable) Drilling length max: 250 mm Drilling depth max: 120 mm Motor power: 3 HP (2.2 KW) Rotation head
used
: gebraucht : 1986 : 4545 : prompt, Zwischenverkauf v : Österreich : 8400 € : 1 : 80 - 2200 (8) U/min : DIN2078 ISO30 (Anzugsschr : 300 x 200 x 350 mm : 600 x 200 mm : 1250 mm : 1350 mm : 1550 mm : 450 kg : 1200 mm/min. : 45 mm : 1600 Nm : 1,1/1,4 kW : 600 x 200 mm : 20 - 370 mm : 84 - 434 mm : 20 - 200 mm/min coolant equipment machine lamp 11 Pc. Milling arbors machine feet Swivelling vertical milling head (+/- 90°) with extendable spindle sleeve Horziontal milling spindle User Manual in German DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.