3 roll used for sale

Belt width 350 mm Number of straightening rollers - 11 pcs Diameter 60 mm Capacity 350 x 2.5 mm Motor 4 kW Speed adjustable by variator drive

Conveyor belt, belt conveyor, belt conveyor, belt conveyor MTFMasch. No: Year of construction approx. 2015Effective length: 3200 mmBelt width: 490 mmBelt length: approx. 6550 mmFrame profile height: 47 mmPulley diameter: 30 mmBelt speed: 6 m/min. to 48 m/min. Conveyor belt height: approx. 960 to 1400 mmMotor power: 0.25 kWNet connection: 230 volts, 50 Hz.- infinitely variable belt speed via ABB frequency converter, type ACS150-03E-01A2-4- belt drive via RGM geared motor- belt body made of aluminium profile with stainless steel sheet metal cladding- 1

Z-conveyor, conveyor belt with metal link belt GÖSSLINGMetall belt conveyor, belt conveyor, floor conveyorMasch. No: 15867 Year of construction 2005Useful length: 3100 mmBelt width: 400 mmFrame profile height: 70 mmInsertion width: 465 mmInsertion length bottom: approx. 1500 mmLength conveyor belt slope: approx. 800 mmLength conveyor belt outlet top: approx. 600 mmHeight offset: approx. 170 mmBelt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mmInsertion height: approx. 1050 to 1270Motor power belt drive: approx. 0.37 kWNet connection 400

Through-hole filter cloths for chamber filter press Length plate format in mm: 2000 Width flap format in mm: 1500 Cloth Design: Through-Hole Cloth Hem in mm: 30

Filter Cloth for Chamber Filter Press Length plate format in mm: 2000 Width flap format in mm: 1500 Cloth Design: Through-Hole Cloth with Velcro Hem in mm: 30

Olive and pot belt drilling machine Ganner for windows Type 370 Machine No. 190469 Built in 1994 Combined Corner Bearing and Olive Drilling Machine Drill head with 3 drill bits Motor power 0.75 kW 2800 rpm Compressed air connection 5 – 7 bar Suction nozzle diameter 100 mm Well functioning condition Dimensions approx. 2700 x 900 x 1400 mm Weight approx. 250 kg

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 300 Cette machine d’injection soufflage PROCREA REV 300 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 50 cc. à 15 litres et poids de 20 gr. à 700 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 8 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 300 est très simple grâce au système automatique d'extraction appliqué au revolver.

turning diameter: 720 mm turning length: 3000 mm centre height: 360 mm spindle bore: 106 mm turning speed range: 1 - 1800 U/min tailstock quill taper MT: 6 workpiece weight max.: 3800 kg total power requirement: 36 kW weight of the machine ca.: 6100 kg dimensions of the machine ca.: 4800 x 2450 x 2000 mm CNC lathe - cycle controlled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 2500 mm control: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mm swing over bed: 780 mm c-axis: 0,1-30 1/min diameter of quill: 160 mm taper bore: MK 5 tool length - max.: 500 mm weight of tools max.: 15 kg weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm) The data for this ad was crea ...

Aircooled chiller CARRIER 30RA 090 B0723 PEE 89 kW Cooling capacity: 89 kW / 25.31 tons (12/7 — 35°C) Year of manufacture: 2009 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. DANFOSS CSHA150KE (scroll) + 2 pcs. DANFOSS SZ120S4VC (scroll) Type of refrigerant: R407С Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Ebara DWC-N/I300/1.1 IE3, expansion vessel. Dimensions: 2.3x2.07x1.33 m. Weight: 1093 kg. Working hours: 10730/12540/12570 h. Condition: Good

Reference Num.: 4205 Brand: Kodak Type: NexPress SX 3300 Construction year: 2014 Impressions: 13 mio Available: directly Status: Not in production Location: Deutschland

A horizontal double-column bandsaw Behringer is available. Cutting range round material: 340mm, cutting range square material: 340mm/340mm, cutting speed: 120m/min, saw band dimensions X/Y/Z: 4860mm/32mm/1.1mm, machine dimensions X/Y/Z: approx. 3250mm/2600mm/1650mm, weight: approx. 2500kg. An on-site inspection is possible.

PALMARY OCD-3260 CNC grinding machine was built in 2020 by the Taiwanese company Palmary Machinery Co., Ltd. The machine, designed to grind holes and rotary surfaces with a maximum diameter of 320 mm, offers excellent machining precision and efficiency for many years of intensive operation. To achieve this, a number of state-of-the-art components are used, such as a specially constructed spindle made of high-quality steel alloys which is mounted on precision bearings. In turn, the design of the grinding wheel spindle uses special hydrostatic bearings, which achieve high operating speeds with no friction between the surfaces. This eliminates heat energy and thus the creation of deformations. The working head, driven by a powerful servomotor, rotates in a range of -30° to +90°. All guideways are lubricated by an advanced automatic hydrostatic system, ensuring, among others, extremely  ...

Extruder S 36/22D. Double head, can also be supplied with single or triple head. Good condition

Key data: 1257 KW, 1580 kVA, 400 V

Caterpillar 3512-B STD Serial No.: 8EM00341 1257KW 1580 kva stamford 400volt 50hz & 60hz possible scope: genset on frame and alternator control panel small accessories

Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5 / 100 mm, Ø min / max to grinding: 1.5 / 100 mm, Min/max speed of regulating wheel (r.p.m.): 10 / 250 rpm, Regulating wheel width: 200 mm, Dimensions of the regulating wheel (OD x ID x W): Ø 270 x Ø 140 x 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Maximum length to be rectified in plongeé: 200 mm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel head motor power: 15 kW, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Tall: 1420 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1300 mm, High: 1420 mm, Weight: 4200 kg

table length: 3050 mm table width: 1525 mm burner heads: 1 Control: Mazatrol PreviewG workpiece weight: 930 kg traversing speed: 120 m/min laser capacity in Watt: 6 kW cutting width: bis 25 mm x-travel: 3110 mm y-travel: 1595 mm z-travel: 110 mm weight: 15200 kg total power requirement: 41 kW dimensions of the machine ca.: mm NEW and UNUSED Machine Laser cutting machine with automatic shuttle table - Mazatrol PreviewG CNC control - 2 pallets - Multicontrol cutting head (Optiflex) - Donaldson DFPRE-4L SPKTRP (7,5kW) extraction system - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Injection molding machine

CINCINNATI PROTON 45-30G Attention: Machine in left-hand version Screw diameter: 45 mm, L/D = 30 Grooved catchment zone Motor (DC drive): 65 kW Screw speed: max. 320 rpm Tool zones: 4+1 for adapters Melt pressure & temperature sensor included EXcPRO-NT control incl. CAN bus for data communication Air conditioner for control cabinet Cylinder in bimetal design – condition: very good Screw with few operating hours – condition: very good Without material funnel & without adapter

Incubator Manufacturer: Thermo Scientific Forma Steri-Cycle Model 371 Year of construction 2014 Very good condition The Thermo Scientific Type 371 CO2 Incubator is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used in bio tissue engineering, in vitro fertilization (IVF) clinics, and academic hospitals, among others. Specifications Voltage: 230V, 50/60Hz Current: 4.4A Temperature range: + 5 °C above ambient temperature up to 50 °C CO2 range: 0 – 20% Capacity: 184 L External dimensions (W) x (D) x (H): 66 x 64 x 98 cm Inner dimensions (W) x (D) x (H): 47 x 47 x 65 cm

Key data: 3000 mm, 1500 mm, 4000 W

3000 x 1500mm / 4000w / MP FLEXIT Automatic loading & unloading

Reference Num.: 4099 Brand: Heidelberg Type: KS Cylinder 38x52 Construction year: 1960 Size: 38 x 52 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 38 x 52 mm Total weight: kg 3,500 / lbs 7,716

gebr. Slotted Hole Drilling Machine GANNER GANNOMAT Junior LBM 320 Drilling on 2 levels YOC 1992 Motor power: 1.5 kW (380V / 16A plug) Rated current: 3.4 A Spindle speed: 3,000 rpm Pneumatic height adjustment: 150 mm Clamping height of the workpieces: max. 250 mm Working height: 850 mm Dowel pitch: 12 mm 2-lever operation 2 pneum. Workpiece clamp 3 plug-in stops (2x 90°, 1 x mitre stop) Compressed air connection: 6 bar Weight: 270 kg Floor space: 1,200 mm x 1,000 mm Technical data according to manufacturer's specifications.

Main spindle: Spindle bore (I.D.): 80 mm Spindle nose: ASA A2-8 Revolver: Automatic 4-cavity turret SQT-190-87-C Lining (front): 3-jaw universal chuck ASA8 Diameter: Ø 315 mm Speed: 1250 rpm Inner Passage (I.D.): 103 mm Accessories: Set of 3 basic jaws Ø 315 mm Accessories: Set of 3 hard top jaws Ø 315 mm Accessories: Set of 3 soft top jaws Ø 315 mm Lining (back): 3-jaw universal chuck (rear) Diameter: Ø 315 Inner Passage (I.D.): 103 mm

Amada punching machine EMK 3610NT incl. loading unit MP300 for sale. We would like to hand over the machine complete with tools and Wilson X-Sharp grinding machine.

A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible.

A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.

Interroll Rising falling Incline belt conveyor with leading belt GF 4778 (3888+890)-690-580 RA2365 Technical data: Conveyor length (NL): 4778 mm ( 3888 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4778 (3888+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type:  ...

meta BLPS 304 II for the measurement of organic soil contamination. Software Version 1.12 Supplied without sampling probes More items - new and used - can be found in our shop! International shipping costs on request!

CONTROLS   PLC SIEMENS S5 115U OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 140 mm   sheet thickness max.: 6 mm   coil weight max.: 3 to COIL CHAIR   coil weight max.: 3 to   stroke: 500 mm DECOILER   design: single reel   sheet width max.: 300 mm   coil weight max.: 3 to   max. diameter of coil: 1300 mm   mandrel expansion range from: 360 mm   mandrel expansion range up to: 430 mm LEVELLER UNIT   sheet width max.: 140 mm   sheet thickness max.: 6 mm   sheet thickness min.: 3 mm   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   feed velocity max.: 43 m/min ELECTRICAL SPECIFICATIONS   total power consumption: 35 kW KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

dimensions of saw-band: 4200 x 34 x 1,1 mm capacity 90 degrees: round: 320 mm capacity 90 degrees: flat: 500 x 300 mm : 320 mm : 310 x 310 mm : 200 mm : 200 x180 mm : 280 mm : 300 x 230 mm cutting speed: 18 - 115 m/min total power requirement: 4,5 kW weight of the machine ca.: 1.100 kg dimensions of the machine ca.: 14850 x 2250 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1064 KW, 1500 1/min

Two units JENBACHER JGS 320GS NL available One engine dismantled and can be used for spare parts Capacity 1064 kw 1500 rpm With stamford alternator

Cardboard remaining stock 374x374x166 mm 3C450g/m2 5,000 pieces We offer 5000 cardboard boxes as remaining stock. We also have matching cans for sale, there can always be 32 pieces of 400ml cans packed in each carton. €0.30 per box for orders of 5,000 pieces, smaller quantities also possible, on request Dimensions: 374x374x166 mm Type of carton: 3C450g/m2 (super stable)

tube diameter: . mm wall strength: 15 St52 und Edelstahl mm bending radius min.: 6-120 mm : : 6-42 mm Hydraulikrohre dimensions: L/B/H 2000x2000x1300 mm operating pressure: 200 bar filling amount: ca. 70 l 0: 20000 ml 0: 5,5 kW voltage: 400 V rated current: max. 16 A control: 4/3 Wege-Ventil bending angle max.: 150 ° Duty cycle: 100 % Radius range between: 2xD und 3,5 x D total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact  ...

Key data: 18 , 8 , 3

Gyártó: Kaeser ASD 32T csavarkompresszor + hűtőszárító folyamatosan karbantartott! teljes dokumentáció Építési év: 2008 Névleges nyomás: 8 bar Levegőáram: 3,16 m3/min Levegőáram: 189,6 /óra Üzemóra: 87000 Hűtőszárító: ABT60 Sűrített levegő csatlakozása: G 1¼ Feszültség: 400 V/3 PH, 36 A Teljesítmény: 18,5 kW Motor fordulatszáma: 2945/min Környezeti hőmérséklet: 3 / 45°C A gép súlya: 745 A gép méretei: 1770 x 900 x 1530 mm

sheet width: . mm plate thickness: 10 Festigkeitvon N/mm²400 mm distance between columns: . mm stroke: 300 mm bending angle max.: 130 ° 0: 3000 mm pointed rail: 45 Grad : auswechselbar Control panel: Digitalanzeige, Tastatur inside radius min.: 3 x Blechdicke mm Shortest leg length: 10 x Blechdicke mm drive: hydraulisch total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are ...

Herma's high-performance labeling machine for lid and side labels. Capacity: 100 labels per minute Round cans were labeled with the Herma (400ml). However, it can also be used for any other cans and bottles. The machine sticks the label all around and also on the lid. The machine therefore has several labeling heads, so that the label is simultaneously labeled all around the can/bottle and is also labeled on the lid of the can/bottle. The machine is in perfect working order. The reason for the sale is the change in the packaging of the product.

Key data: 300 t, 3000 mm

Inv. Num. : 8595 Type: CNC HAP 30300 Producer: DURMA Generated: 2000 Parameters: Control system: DNC 880S Compressive force: 300 t Maximum bending length: 3000 mm Lifting height: 245 mm Weight of the upper tool: 55 kg Reduce tool weight: 310 kg Number of strokes: 3 1/min Machine height: 3100 mm Machine length: 4550 mm Machine width: 2400 mm Machine weight: 16000 kg

Special price because without dukumentation / without disc without funnel +VAT (reclaimable) R1277 Injection moulding machine Arburg A 270 Hydronica D-Version Dialogica topZustand screw D 30mm with device for injection into the parting plane a viewing is desirable by appointment Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations).

Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg

Mazatrol SMART Control Max. turning diameter: 420 mm Max. turning length: 1,233 mm Travel X/Z: 240/1,350 mm Spindle motor 30 kW Max. spindle speed: 4,000 rpm Spindle nose A2-8 Max. bar passage: 80 mm 12-speed revolver 3-jaw chuck Kitagawa BB210 Conveyor Manuals CE mark Switch-on time: about 4,000 hours

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 315 to   nominal work capacity: 38 kNm PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 1200 mm   thickness of bolster plate: 200 mm SLIDE   slide force: 315 to   table surface (left-right): 1995 mm   table surface (front-back): 1100 mm   stroke: 160 mm   stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS)   slide adjustment: 140 mm   stroke rate (min.): 20 /min   stroke rate (max.): 80 /min   main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 555 mm   distance between columns (H-frame): 2060 mm   passline opening (free passa ...

Specifications Brand: Bottero Type: 301C Kind: Layered cutting table Serial number: GG301C-3860 Year of construction: 1997 Weight: ± 2,800 kg Assets: 10 kVA Electrical connection: 380V / 50Hz Length mm: 4,900mm Width mm: 3,350mm Height mm: 930mm Transport dimensions L x W x H 4.2 x 2.4 + 4.8 x 1.0 x 1.6 Min.-max. glass thickness: 3– 10mm, 33.1– 66.2 Min.-max. glass size: Max. length 3,400mm Photos/film available: The photos are not of this cutting table, but of a table similar to this one. The identification plate is of this machine.