3 roll used for sale

Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml) | bottle volume: 350-1500ml | PET bottles | standard 28/30mm PET caps | 1500 liter of water filling /hour | 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of m ...

Fully automatic paper labelling machine with PLC controlled or touch switch knob control, photoelectric device, variable speed motors and conveyor chain board. - Specifications: label length: 250-600mm | Label width: 65-195mm | bottle diameter: 80-190mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: 300mm | label precision: ? 1mm | production capacity: max. speed of the machine in neutral: 33 cycles/minute | power: 220V, 50Hz/60Hz | machine dimensions: L2000mm?W900mm?H1500mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are  ...

Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 40 cycles/min | bag sizes: L(40-650)xW(140-450)mm, (double film pulling possible for longer bags) | suitable film width: 220-920mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 4.5kW | air pressure: 0.2-0.8MPa | compressed air consumption: 1.0m?/min | dimensions (LxWxH): 247017302065mm | weight: 1150kg. Please note th ...

Metal Detector for food and other (e.g. medical, chemical, textile) products, stainless steel framework, touch screen, self-learning system. - Specifications: weight of the product: max. 5kg | detecting speed: 0.2-0.8m/sec | detecting accuracy: FE from ? 1.0mm, SUS from ? 2.2mm | tunnel size WxH: 350x175mm | max. passing size WxH: 300x135mm | power: 220V/0.3kW, 50Hz/60Hz, dimensions and weight: L1545xW1114xH1383mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Combination of Metal Detector and Weigh Checker. With two recect devices to check if product metallic impurities and/or meets target weight. - Specifications: stainless steel framework, weight range: 5-990g | detecting speed 0.2-0.75m/sec | detecting accuracy: FE from ? 1.0mm, SUS from ? 2.0mm | target weight accuracy: ? 0.5g | tunnel size WxH: 330x150mm | max. passing size WxH: 280x110mm | power: 220V/0.35kW, 50Hz/60Hz | dimensions and weight: L1700xW600xH900mm, 160/260kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging s ...

Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our  ...

Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...

Compact vertical packaging system for small 3-side sealed pouches. The system is designed for 3 different dosing units and thus allows the packaging of granulates, powders and liquids. When changing the product type, time is needed for changeover, which requires technical experience. The configurations of the dosing units are selected on the basis of customized product requirements, which results in the respective specifications. OMRON PLC and 7-touchscreen, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, AIRTAC pneumatic components | self-diagnose functions, motorized tension control, fast and smooth film transportation. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | bag size: L(30-180)xW(10-80)mm | bag type: 3-side-seal-bags | vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting | film width: max. 180mm |  ...

Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm | length of sealing blades: horizontal = 703mm,  ...

Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35XL. That system includes: Shrink Wrapper speed shrink 35XL (vertical), SHRINKtunnel-POF-XL (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: XL-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 800mm provided that H < 180mm and (W + H) max. 650mm provided that H < 180mm | max. length of sealing blades: horizontal  ...

M-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-M (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) = 500mm provided that H < 180mm and (W + H) = 400mm provided that H < 180mm | length of sealing blades: horizontal = 623mm, vertical = 550mm | power: 220V/2.8kW | machine dimensions: L1850xW1350xH1300mm | weight: 800kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - U ...

L-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-L (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute | packing sizes: (L + H) = 600mm provided that H < 180mm and (W + H) = 500mm provided that H < 180mm | length of sealing blades: horizontal = 703mm, vertical = 550mm | power: 220V/3.2kW | machine dimensions: L2015xW1470xH1300mm | weight: 850kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task ...

XL-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XL (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute | packing sizes: (L + H) = 800mm provided that H < 180mm and (W + H) = 650mm provided that H < 180mm | length of sealing blades: horizontal = 903mm, vertical = 750mm | power: 220V/3.5kW | machine dimensions: L2430xW1550xH1300mm | weight: 930kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging ta ...

Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm | length of sealing blades: horizontal = 623mm,  ...

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-3000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 3000-4000kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 60L/min | power supply: 220V | power consumption: 7.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 300-800kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 20L/min | power supply: 220V | power consumption: 3kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Checkweigher with reject device to check if product meets target weight. New version with data readout. - Specifications: belt width: 220mm | measuring area (weighing belt): L500xW330mm | weight range: 10-10,000g | accuracy: +/- 1-4g | max. speed of the machine in neutral: 60 cycles/minute | power: 0.3kW, 220V, 1-phase | machine dimensions (mm) approx.: L2459xW684xH780(weighing belt) | 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 330mm | weight range: 5-999g | accuracy: +/- 1.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 330mm | weight range: 1-10kg | accuracy: +/- 3.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XXL version for very large products, inclusive suitable shrink tunnel. Low cost packaging solution even for large products of up to W+H

Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): 380V, max. 40kW | ca. 6bar | max. speed of the machine in neutral: 8 cycles/min | max. product dimensions (mm): W(ca.1000-1200)xH(ca.500-600) | machine dimensions (mm): L(ca.5600-9500)xW(ca.2000)xH(ca.2000) | weight (net/gross): ca.1400-2400/1600-2700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Mobile fine dust filter, with fan 3000 cbm/h and 20 m2 cartridge filter with jet cleaning, as good as new condition

Tumbler with cooling system Manufacturer: Gunther Model: GPA 300K Made of stainless steel Volume: 300 liters Capacity: 200kg Dimensions: 1950x1000x2100mm Electric power: 2.5kW

Blitz Screw Compressor+ Blitz Refrigeration Dryer+ 2000 ltr. Compressed air tank 11 bar, compressor engine 37 Kw., 5.2 cbm/min. 10 bar

SANDRETTO série 9 1300/3000 Force de serrage : 300 T - 3000 KN Distance entre les barres d'attache : 570 X 570 mm Dimension du plateau : 860 X 860 mm Epaisseur du moule min / max : 210 - 730 mm Ouverture du moule : 630 mm Volume injectable : 658 cm3 Pression sur le matériau : 1985 bars Diamètre de la vis : 55 mm Puissance totale de la machine : 53,7 KW Rapport L/D : 20 Poids : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m

Key data: 3500 , 70

SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg

MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...

table length: 3000 mm table width: 2000 mm table load: 200 t total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3500 mm table width: 1750 mm table load: 350 t total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 3500 mm plate depth: 2000 mm plate height: 360 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 13 mm total power requirement: kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: m - thickness at max. cutting length: 1 3 mm (mild steel 6 mm, high grade steel) - Specification: - backstop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3000 t chamfer lenght: 14000 mm distance between columns: 10500 mm Control: CYBELECCNC 7000 m. Grafik table width: 1000 mm stroke: 1300 mm min./max.distance between table and ram: 1800 mm controlled axis: Y1, Y2, X1, X2 total power requirement: kW weight of the machine ca.: mind. 465 t dimensions of the machine ca.: 14600 x 4200 x 7200 mm - throat depth: 700 mm - controlled axes: Y1, Y2, X1, X2 - Dimensions (length x width x height): - Foundation depth for table: 3400 mm - Foundation depth for stand: 1700 mm - Dimensions of the individual components for transportation: - Table: 14020 x 4270 x 910 mm, weight approx. 125 tons - Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons - 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each - Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons - 2 pcs. Container 40” for cylinder, electrics and various attach ...

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: Ral 5015 blue Frame profile: PLFB 13 Profile dimensions: P 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 3,300 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Haco PPM 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 HP Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 7,5 ton

turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Seawater Pump C32 / 3412

Useful cutting length 4,000mm Cutting thickness 4/7mm Adjustable blade spacing motorized backgauge with 1,000mm stroke programmer Adjustable cutting angle 250mm recess machine in good general condition visible in operation at our headquarters!

turning diameter: 1050 mm turning length: 3000 mm control: OSP 300 SA-H travel -x axis: 1080 mm travel -z axis: 3215 mm travel -y axis: -330 +330 mm b-axis: -30 ~210 - 0,001 ° spindle turning speed range: 14 - 1500 U/min spindle hollow: 185 mm power capacity - milling spindle: 37 / 22 / 15 kW Spindle drive motor main spindle: 45 / 37 kW rapid travel x/y/z: 40 / 40 / 30 mm/min C-axis turning speed: 100 U/min max. tool length: 600 mm max. tool diameter: 135 / 300 mm max. tool weight: 30 kg total power requirement: 81,3 kVA weight of the machine ca.: 43 to dimensions of the machine ca.: 9,75x3,55x3,61 m Equipment: - CNC control Okuma OSP P 300 SA-H - NC tailstock - Milling spindle 40 - 10,000 rpm, 37/22/15 kW - Touch setter - Coolant through the spindle - Chip conveyor - Hydraulic steady rest SMW K6.1 (215 - 510 mm) - 3-jaw chuck 15’ approx. 16920h switch-on hours and 9633h automatic ope ...

STORK PEGASUS ROTARY SCREEN PRINTER STORK PEGASUS ROTARY SCREEN PRINTER. TYPE 3200/24/20 .Year 2001 20 colours installed on a 24 position print block. Max printing width 3200mm Repeat sizes 640/914mm . Magnet System print paste application. Comprising : High entry with fabric guide rollers E+L KF 2020 edge guiders ,dust extraction unit. Reconditioned and upgraded January, 2024 Fabric passage onto a Curved Plate with Thermoplast , Wet Gluing.Belt Washing. STORK APOLLO Dryer ,Type 3200. 2 compartments ,Gas heated with support conveyor. Ext with fabric take off rollers and plaiter. Find more here - / Contact us at -

Key data: 300 mm

SPECIFICATIONS: Saw blade: Ø 300 mm Installed power: 2.5 HP Voltage: 380 V EQUIPMENT: 01 Workbench

Packaging capacity: 100 cups/min, packaging schemes: 2x3x2/2x5x2, product formats X/Y/Z: 41mm/133mm/98mm, max. product tolerance: +/-1.5mm, infeed and outfeed height: 860mm/1060mm, infeed and outfeed adjustment: +/-50mm, operating hours: 64016h. Documentation available. On-site inspection is possible.

T-slot Table 3000 x 135 x 430 mm Thickness: 430 mm Length: 3000 mm Large: 1350 mm Weight: 5 ton With (1) -- Without (2) nuts: 7 t-slots

T-slot Table 3000 x 1350 x 430 mm Thickness: 430 mm Length: 3000 mm Large: 1350 mm Weight: 5 ton With (1) -- Without (2) nuts: 7 t-slots

: 30 mm : 30 mm flat steel: 50 x 10 mm L-beam: mm Axis diameter: 30 mm work speed: 6,0 U/min roll diameter -toolpieces: 132 mm total power requirement: 0,75 kW weight of the machine ca.: 0,25 Kg dimensions of the machine ca.: 0,6 x 0,8 x 1,3 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - / Contact us at -

gebr. Radius and bevel grinding machine FISCHER (BARTH) RFM 320 YOC 2007 Oscillation Tischgr. 1,275 x 300 mm 8 radii adjustable: (R2, 3, 4, 5, 6, 8, 10, 12.5) Bevel grinding device up to 16 mm wide Extraction connection: 60 mm Bracket for feeder Socket for feeder pneumatic belt cleaning Chassis Dimensions 130 x 70 cm Weight: 159 kg approx. 30 sandpaper incl. very good used condition Manufacturer

Technical data according to the nameplate: Manufacturer: EMK / Sondermeier Elektromotoren Handels GmbH Type: KHL1G315M-4B3E3KR Engine Number: 71500846002 Power: 132 kW Voltage: 400 V (delta Δ) Current consumption: 241 A Frequency: 50 Hz Speed: 1435 rpm Design: B3 (foot mounting) Degree of protection: IP55 Insulation class: F COS φ: 0.89 Date of manufacture: 08/2022 Place of manufacture: Rain / Germany