3 roll used for sale

Key data: 1045 KW, 600 V

Surplus/Never used, Zero Hours, Caterpillar 3512C, Land Drill Module 1045 kW Prime Power, 600v, 1200 RPM, 0.733 P.F. with Jacket Water Heater, Air Cleaners, Radiator 46/CVS, 12" Spark Arrester Muffler, EMCP Control Panel, Simplex Oil Filter, designed for Petro Drilling applications, zero hours, from year 2015.

table length: 3000 mm table width: 3000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure: 10 bar Motor: 15 kW Free air delivery: 2,22 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 380 kg Compressed air connection: 1

turning diameter: 320 mm turning length: 750 mm control: Siemens type: 810DL CCUO turning diameter over slide rest: 150 mm cross movement: 185 mm spindle passage: 52 mm turning speeds: 14-3550 U/min transmission ratio: 2 quill stroke: 120 mm rapid traverse: 6 m/min main drive motor: 7 kW 3-jaw-chuck diameter: 200 mm total power requirement: 10 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,6x1,44x1,44 m 8950 turning hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mm swing diameter: 4000 mm turning height: 3150 mm slide adjustment: 1700 mm table load: 25 t turning speeds: U/min Feed: mm/U digital readout: Heidenhain Rest: 2 Side head: total power requirement: 90 kW weight of the machine ca.: 95 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool diameter: 300 mm length: 300 mm weight: 80 kg range L-W-H: 800x400x750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure: 15 bar Motor: 3,2 kW Free air delivery: 0,297 m³/min Measurement (WxHxD): 775 x 520 x 510 Weight: 70 kg Compressed air connection: 3/4

Pressure: 10 bar Motor: 4,4 kW Free air delivery: 0,52 m³/min Measurement (WxHxD): 1895 x 1280 x 720 Weight: 290 kg Compressed air connection: 1/2

Pressure: 10 bar Motor: 55 kW Free air delivery: 8,5 m³/min Measurement (WxHxD): 2040 x 1450 x 1090 Weight: 1498 kg Compressed air connection: 1 1/2

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure: 10 bar Motor: 250 kW Free air delivery: 38,18 m³/min Measurement (WxHxD): 3100 x 2140 x 1910 Weight: 4800 kg Compressed air connection: DN 100

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm spindle drive: 46 kW Feed: 10000 mm/min Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of Lo ...

x-travel: 3500 mm y-travel: 1000 mm z-travel: 1300 mm Control: Heidenhain type: TNC 155 surface area: 3700x1120 mm power capacity: 26 kW transmission ratio: 2 turning speeds: 40-2000 U/min spindle taper ISO: 50 Feed: 3000 mm/min Rapid movement: 8000 mm/min total power requirement: 40 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Robosoft 338-0147

; Gross weight [kg]: 1836

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t passage width: 1350 mm stroke: 500 mm column travel -side: 830 mm table surface area: 1350x1380 (1870x1380) mm table height: 1060 mm total power requirement: 45 kW weight of the machine ca.: 20 t dimensions of the machine ca.: BxTxH 2500x2000x3950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 2100

Part No.: 950 024 014-02 Ser. No.: 706DGY00306 Equipment / Additional information: Length: maximum 700 mm Print area: 326 x 690 mm Paper thickness: max. 600 µm Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supports print service providers who need a high-volume feeding solution to handle a wide range of different sheet sizes and ...

Manitou Electric Forklift 3-Wheel Electric Forklift This 2016 Manitou ME 318 is a highly maneuverable electric forklift offering efficient, emission-free material handling and a robust lift capacity for smooth facility logistics. Technical Details ‍ 1. Machine identification data Name: 3-Wheel Electric Forklift Manufacturer: Manitou Model: ME 318 Machine number: 861492 Year of manufacture: 2016 2. Operational parameters Nominal capacity: 1800 kg Load center: 500 mm Power source: Electric Max. lift height: 4300 mm (Nominal: 4000 mm) Turning radius: 1555 mm Aisle width (1000 x 1200 pallets, crosswise): 3241 mm Aisle width (800 x 1200 pallets, lengthwise): 3365 mm Fork dimensions (Thickness x Width x Length): 35 mm x 100 mm x 1070 mm Fork carriage: DIN 15173 2A Ground clearance (Under mast / Center wheelbase): 100 mm / 110 mm Load d ...

pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1574; Accessories: SAE 1

KITTNER Lift-tilt device, type KHV-350/30L, for lifting and emptying 200 litre and 300 litre standard loading trolleys. Technical data: Tipping height: adjustable from 3,050 mm to 3,550 mm in 100 mm increments. Lifting weight: max. 300 kg Motor power : 0.75 KW Mains connection: 400V - 50 Hz Lifting principle: by means of roller chain Lifting speed: 5 m/min. Column height: 4,420 mm Total height: 4,480 mm, incl. 200 l trolley in tilted position! Degree of protection: IP 65 Execution: Lifting/tilting device in left-hand version, which means: The loading trolley is retracted into the lifting fork to the left of the mast at right angles to the slide axle! The mast, lifting fork and the fairing of the machine are completely made of stainless steel, material no. 1.4301, surfaces ground. The "slider" and the "slider axle" to accommodate the lifting fork are not made of stai ...

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3151 -Fan: 230 V 19 W -Dimensions: 205/205/H105 mm -Weight: 1.1 kg

Drying chamber Mühlböck Already dismantled and stored in a dry place, ready for collection Type ZLSM -4x1.20-3x1.20-04.72 Year of construction 2003 With control Interior dimensions gross 7.40 x 4.55 x H 4.25 meters Gross stacking capacity 73 m³ Stacking depth 5 x 1.20 m + 4 x 0.10 m Stacking height 3 x 1.20 m + 3 x 0.10 m + 0.30 m Interior length 2 x 2.10 m + 0.52 m With ventilation via false ceiling 3 fans each 3 kW 10 measuring points With frequency converter for connection to an external hot water heating system or hot water pipe Heating capacity 223 kW Water temperature 85 °C Water volume 14 m³/h Voltage 230/400 Volt Total connected load 12 kW Control Program MB 8000 PC Remote control via modem via RS485 connection Drying assistant Danfoss VLT 6000 HVAC Variable Frequency Drive Clear door height 4200 mm Clear door width 4560 mm External dimensions 770 ...

Mezzanine / Sigma Profilbau / Industrial Platform (Top Condition) For sale is a high-quality mezzanine / Sigma Profilbau built in 2017, ideal for industry, logistics, warehousing or production. The system is solid and suitable for high loads – perfect for expanding storage areas without new construction Technical data: Profile : Sigma Total area: approx. 33 m x 30 m (≈ 990 m²) Floor height (upper edge): approx. 4.10 m Lower edge of the stage: approx. 3.80 m Load capacity: 500 kg/m² Column grid: 2.80 m x 4.40 m Railing height: 1.10 m Stairwell: 1 piece available Year of Make: 2017 Flooring: 38mm wood ⸻ ️ Description: Robust Sigma Profilbau platform Very good condition – can be used again immediately Large contiguous area → ideal for storage, order picking or conveyor technology Flexibly adaptable / expandable thanks to the grid Perfect fo ...

; Gross weight [kg]: 152

"RSA Heavy Duty Sawing, Deburring, Cleaning and Drying Center" for Steel Pipes The machining center consists of: 1) RSA Precision Speed Saw RASACUT SC 3000 with Bundle Loader 2) RSA linkage between the RSA RASACUT precision high-speed saw and the RSA RASAPLAN XY 3000 deburring system 3) RSA deburring system RASAPLAN XY 3000 4) Extraction system/wet separator for RSA deburring system RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for pipes up to 6,200 mm TECHNICAL DATA Lswvuey E Iype Nu Iehf Tube Ø: 6 mm to 55 mm Wall thicknesses: 1 - 6 mm Bar weight: max. 10 kg/m Materials: Steel Magnetism: max. 3 gauss Output lengths: 6200 mm sawable lengths: 150 - 3000 mm Limitation: Ø 6 – 7.9 mm max. length: 1200 mm Ø 8 – 9.9 mm max. length: 1500 mm Ø 10 – 12 mm max. length: 2000 mm Length tolerance ...

1. Qty. 3 Bell Batch Annealing Furnaces (Pair of bases 1-6) Mfc.: EBNER Type: HOG 180/320 St – H2 Built: 1989 Stopped: 2025 Each pair of bases (units: 1-2, 3-4, 5-6) has one cooling hood and one heating hood. Coil Max. outer diameter: 1,650 mm Max. stacking height: 3,200 mm Hood dia.: 2000 mm Useful dia. (inner hood): 1800 mm Useful height (coil dia. 1540 mm): 3400 mm Useful height (max. coil dia. 1650 mm): 3200 mm Max. base load: 50 T 2. Qty. 1 Bell Batch Annealing Furnaces (Pair of bases 7-8) Mfc.: EBNER Type: HOG 180/230 St – H2 Built: 1989 Stopped: 2025 Coil Max. outer diameter: 1,650 mm Max. stacking height: 2,300 mm Usefull dia. (inner hood) 1800 mm Hood dia.: 2000 mm 2 Protective hoods with inner shell Max. temp. under hood: 750 °C Maximum base load: 35 t 2 Control stations

Flywheel size: SAE1/14, Mecc Alte ECO38-1L/4C, DER1 voltage regulator, 300kVA continuous / 330kVA stand-by power; Gross weight [kg]: 771

; Gross weight [kg]: 385

Oil filter Fleetguard LF3749. For the following manufacturers / engines: Liebherr Gas Engines, John Deere - 950J D936L 2001 2 John Deere - 950C D9306T 1 John Deere - 1050C 1 Liebherr - R 940 DEMOLITION D944-A7-25 2021 1 Liebherr - R 926 IV/4F D934A7-04 2021 1. Further information can be found from the manufacturer at the presence. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E ...

Key data: 7 KW

A total of 6 starters for sale by Bosch for Liebherr Gasmotoren 1021 8368. Technical details: Volts: 24 volts Power: 7.8 KW Number of teeth: 11 Hole attachment: 3 Direction of rotation: right Riginal numbers are for comparison purposes only: Starter Bosch 0001330013 Starter Bosch 0001330069 Starter Bosch 0001330070 Starter Bosch 0001383037 Starter Bosch 1986S10003 Starter Bosch 1986S10004 Starter Liebherr 10218368 Starter Liebherr 11386646 Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades o ...

For sale is a high-precision in-circuit test system (ICT) from the market leader SPEA, model 3030C BU100 in the compact version. This machine was used in our production in China for specialized testing tasks. In order to guarantee you a smooth takeover, we will take care of the transport of the machine to Germany for you if you make a purchase. The system is fully equipped, including digital pin electronics, high-precision stimuli and a powerful on-board programming (OBP) module. Key Features & Technical Highlights: System Configuration: Model: SPEA 3030C BU100 Compact (Colour: RAL 9010 Pure White) Footprint: Only 970 x 670 mm – ideal for installation close to the line. Interface: Pylon vacuum interface (max. 12 blocks), currently equipped with 10 pylon blocks. Test Channels: Prepared for up to 1024 channels. Powerful control computer: Industrial PC wit ...

Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. New heat-resistant silicone membrane, extremely stretchy and easy to clean. Can also be used for forming preheated thermoplastic materials such as acrylic glass or solid surface materials. Inner frame dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks each 200 liters, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run constantly Mobile on four swivel castors, lockabl ...