3 roll used for sale

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3516/H260 mm -Plate thickness: 30 mm -Plate is: with supporting ribs -1x T slot: 17 mm -Weight: 1800 kg

Depth gauge, caliper, vernier caliper, vernier caliper -Measuring range: 0-300 mm -Fine-tuning -long measuring jaws -Number: 4x depth gauges available -Price: per piece -Weight: 0.6 kg

Vernier caliper, caliper, vernier caliper -Measuring range: 0-300 mm - Fine-tuning -for internal measurements Price: per piece -Quantity: 2 available -Weight: 0.7 kg

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -Type: 3RN1013-2BW00 Price: per piece -Quantity: 2 available -Weight: 0.2 kg

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -Type: 3RN1013-1BW10 Price: per piece -Quantity: 2 available -Weight: 0.2 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: 3RH1911-1HA12 Price: per piece -Quantity: 6 available -Minimum order quantity: complete -Weight: 0.1 kg/piece

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Complete wheel: 2 tires with tube and rim -Tire size: 7.00-12c PR14/ 190-305 -Bolt circle: Ø 228 x 20 mm -Recess: Ø 160 mm -Price/Delivery: complete -Weight: 33 kg/piece

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower, silencer, exhaust silencer, blower silencer -Silencer: Blower silencer -Input/output connection: Ø 210 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 336 x 1790 mm -Weight: 50 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Kowalit, solid rubber tire with rim -Tire size: 18x7-8 Rim 4.33R-8 -Quantity: 1 piece available -Dimensions: Ø 420 x 160 mm -Weight: 19 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk, solid rubber tire with rim -Tire size: 120 x 200/310 KF.OG -Hub bore: Ø 80 mm -Bolt circle: Ø110 mm x 15 mm -Quantity: 1 piece available -Dimensions: Ø 310 x 135 mm -Weight: 15 kg

; Gross weight [kg]: 1195; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87

cutting diameter: 305 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer Doka Eurex 30 top 350 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 350, used - 52,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...

hydrodynamic fluid coupling, centrifugal coupling, rubber disc coupling, claw coupling, connecting coupling -Manufacturer: Lenze -Type: KD 3922656 Size S 08 -Outer diameter: 470 mm -Shaft mount: Ø 65 mm -V-belt pulley: 7-groove SPB 230-7 (17 mm) -Dimensions: Ø 470 x 350 mm -Weight: 76 kg

Laminating machineSemi-automatic laminating system Hand-fed, but with automatic pneumatic overlap-feeding function with bursting system decurling device for completely flat results Re-winder unit – Gloss, Matt, Hologram, Metallic sleeking film Digital hot foil stamping – without cliché – purely digital – from quantity 1 Working width: 380mm Working speed: up to 10m/min. Freely adjustable laminating temperature (0-150°) Adjustable roller pressure, large chrome roller with a diameter of 100 mm Max. dimension: 380 x 1200 mm (table extension recommended from 600 mm) Min. size: 180 x 210 mm Paper thickness: 120 – 350g/m² LCD display with touch screen

USED TETRA PAK TPA 19 330ML PRISMA FILLING LINE FOR SALE YEAR 1998 Item #: Usm-214 Category Tetra Pak TBA 19 TPA 19 330ml Prisma Filling Machine, Version 10v, Working Hour 20500, Year 1998 Tetra Cardboard Packer 70, Year 1998 Easy ride Conveyors and Paper trolly Condition: Good

Serie Jenbacher 4 teste a 4 cilindri codice 367165 (422964 1216091) - Già revisionate e pronte all'uso: 1.500 € - Da revisionare 500 € Jenbacher 4-head 4-cylinder series code 367165 (422964 1216091) - Already overhauled and ready to use 1.500€ - To be overhauled 500 €

DURMA AD-S 30175 CNC hydraulic press brake was built in 2009 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The offered machine is an excellent choice for precision machining of workpieces with a maximum length of 3050 mm. The machining process is performed with a high force of 175 tons in four numerically controlled axes (X, Y1, Y2, R). The state-of-the-art technology used makes it more precise and energy-efficient than other presses available on the market. These include, among others, the manual deflection arrow compensation function, which ensures that the desired angle is achieved along the entire length of the bent workpiece. The sturdy construction, combined with economical drives, in turn guarantees excellent bending results, even during the most intensive challenges. The positioning of the material is facilitated by front supports with T-slots and a back stop operat ...

Key data: 3000 mm, 3 mm

Max. bending length: 3000 mm Max. sheet thickness: 3 mm steel Manual backgauge Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam variable Bending rail ground Operating instructions Weight: approx. 5,000 kg

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Key data: 660 mm, 3000 mm, 440 mm

Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Technical data of the pallet rack crossbar: Shelving system: Arestant Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Truss Type: 10515CN Agraffe: 4 HK (hooks) Clear width: 3,300 mm max. load per pair of trusses 1,500 kg, with the same. distributed load. ( Observe field load ) 02x Safety pins, new Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

MPS EF 330/7 Category: Label Printer Year Built: 2005 Colors: 7 Max. Size: 330 mm Condition: Good Location: Europe Availability: Immediately Additional Machine Details 7 colors Servo flexo press suitable for printing on self-adhesive (PS) materials and unsupported film Maximum web width: 330 mm Maximum print width: 320 mm Plate thickness: 1.14 mm Unwind with splice table Web cleaner Vetaphone corona treater 7 flexo print units Full UV GEW system Cold foil / lamination unit BST web inspection camera 1 Rotary The Station Waste matrix rewind Back scorer Product rewind Automatic registration support Plate flipping system for easier registration Cooled drums Antistatic system Available Printing Cylinders (Z) 83, 90, 97, 106, 111, 116, 128, 136 Condition Machine in high-productivity operation Maintained under a very strict maintenance program Inspection  ...

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic , Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Refrigeration Machines, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 59.6 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 10.2 Head available bar: 1.68 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4 Dimensions: Length mm 2470, width mm 1112, height mm 1595 Weight kg 750 Connection R 2" Serial No.: 2200416573 Year of construction 2024 Condition: Optical 1, Technical 1 (Bearing Machin ...

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Refrigeration Machines, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 59.6 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 10.2 Head available bar: 1.68 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4 Dimensions: Length mm 2470, width mm 1112, height mm 1595 Weight kg 750 Connection R 2" Serial No.: 2200416573 Year of construction 2024 Condition: Optical 1, Technical 1 (Bearing Machin ...

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Honing machine, SUNNEN EC3500, (like ml3500 ml5000 ml2000), this machine is currently under complete electronic retrofit (Siemens / Telemecanique), Touch screen. Loader interface possible

Horizontal Baller for SALE/RENT BAUER 300 Baller is in good working condition (was used in printing house)! Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Kledex Dk S Asm Aty Atjl Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE UPON REQUEST! ----- Verkaufen/Mieten Ballenpress BAUER 300 Technische Daten: Bsbmeycfv Iecbw Nvswh Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 300 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

TRUMPF TruPrint 3000 3D Printers GENERAL Project No.: 905844 Quantity: 1 pcs. Manufacturer: TRUMPF Type: TruPrint 3000 Year of Make: 2016 Condition: Used machine Approx (hrs): 3571 DESCRIPTION LASER Laser power Preheating substrate plate 200 degrees Diameter buildable area 300 mm Overall height 400 mm 2 pcs. removable construction and storage cylinders Adjustable layer thickness 20-150/1000 mm GENERAL TECHNICAL DATA Mains fuse 32 A Machine dimensions (LxWxH) approx. 3385 x 1750 x 2070 mm Machine weight approx. 4300 kg NOTE Suitable for stainless steels, tool steels, aluminum, nickel-based or titanium alloys We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non- ...

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375