3 roll used for sale

Roller press Make Swift Model Roller press 76 Year 1980´s ? Width 760 mm Available Direct

FRITSCH cone winding machine 250 T, used, technically tested, function tested, partially overhauled with new Teflonized adjustment roller/feed shaft

Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

ID3299 MAN 16.170 year/Baujahr 1984 23,000 km (real!) ROLLAND Conic compost spreader (built 2009) on MAN 16.170, Truck has cross and longitudinal lock and PTO gearbox for roller drive Compost spreader ROLLAND Conic (built in 2009) on MAN 16.170, truck has cross and longitudinal lock and PTO drive for roller drive

Year of construction 2023 Anilox roller with 120 lines/cm suitable for Heidelberg XL 106 Anilox roller with 100 lines/cm Scoop volume 10 ccm hexagonal Angle 60° Delivery date: immediately Price on request. We deliver and install worldwide!

Lathe spinning tool, roller block, support roller -Support roller: solid design -Roll: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Number: 2x roller block available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/piece

Sheeting machine FRITSCH, type: Rollfix 60 / 650 E -Refurbished- - New Operating Panel - New frames for control - New drip plates with plastic guides - Digital control - on castors - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

Air cooler, evaporator, cold storage, refrigerated container, cold room -Number: 2x fans 0.58 kW 1200 watts -Weight: 16 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1- 2 inch -Weight: 6.5 kg

used rack oven Miwe Rollin RI 1.0608 TL for a rack trolley with exhaust hood and ramp for sale. -Rack oven Miwe Rollin -Model RI 1.0608 TL - for 60x80cm trays -with oil burner -Built in 2007 and 2009 -400/230V 3/N/PE -50 Hz -Door hinge on the right -with exhaust hood -with drive-on ramp - 2 pieces available in stock

Sheeting machine Dough Sheeter Model: Rollo Easy manual operation for all doughs for rolling out and touring Tables can be folded up Tables with PVC plastic straps Rolling out thickness from 1 to 25 mm Rolling out width up to 370 mm Table sheeter for max. 1.8 kg dough DGUV V3 tested Connection 230 V Dimensions: 1310 x 630 x 500 mm LxDxH New machine with 24 months warranty + service Option: Maintenance contract E-Box Service Package

Perforation - Scoring - Slitting System Rollem Champion 990 with Eurofold Year 1994 - Serial-No. E1088/530 Perforation - Scoring - Slitting System Arbeitsbreite / Working width max 470mm Flachstapelanleger EUROFold / with Flatpile Feeder EUROFold Stufenlose Geschindigkeitsregelung / stepless speed regulation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Roller Conveyor/Rollers 13.76 meters by BITO Manufacturer: BITO Condition: used Year of Make: 2013 Model: Gravity Overall length: approx. 13760 mm Total width: approx. 400 mm Conveyor width: approx. 370 mm Wheelbase: approx. 75 mm Roll diameter: approx. 60 mm Frame: approx. 80 mm high Material: Steel/Galvanized Facility consists of: 2 segments, approx. 3180 mm length 2 segments, approx. 2700 mm length 1 segment, approx. 2000 mm length Price per meter Internal Article Number: 2026051506 Conveyor technology – reliable and immediately ready for use - The conveyor technology offered was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with usual signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and packed safely for transport Pick-up address:  ...

Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes but the machine is sold with new tapes. - Belt width 64cm - with reel - With digital computer control

for sale is a roller from Bomag, 40 operating hours, Subject to prior sale, changes and errors!

Slewing Bearing, Swivel Bearing ROLIX Type: 08 0260 00 zz00 A No. 0430 middle bearing diameter: 260 mm Inner diameter: 190 mm Outer diameter: 329 mm without toothing sealed with rubber New ! Dimensions: 330 x 330 x 50 mm

Fritsch Rollfix Pastry brake Pastry brake, total length 3000mm, belt with 600mm, roller width 630mm, with safety cage, mobile, 1Ph

INDUSTRIAL GAS TURBINE Brand: Rolls-Royce Model: 501-KB5s-DLE Maximum pressure: 1,205 PSI Condition: Pre-owned / Overhauled : Industrial Equipment Operational Period: 1999 - 2011 Total Running Hours: 39,500 hours Documentation: I am reviewing the documents and will send you the key details shortly

Model: Avon 1533-56L Year of Manufacture: 1992 Type: Aeroderivative Gas Turbine Rated power: Approximately 16,347 kW (22,225.73 hp) to 17,007 kW (23,123.08 hp) DIRECTINDUSTRY Thermal Efficiency: Up to 44% Dimensions: Length: Approx. 3,200 mm Diameter: approx. 907 mm Weight: Approximately 1,310 kg

Manufacturer: unbekannt, Type: Hubtisch mit Rollbahn, Year: ca.1990, FREETEXT1: Hubhöhe ca.800 Oberkante Rolle, FREETEXT2: Rollenbreite 800, FREETEXT3: Rollendurchmesser ca.60 mm, FREETEXT4: Hubbühne mit Fahrwerk, FREETEXT5: Pumpe im Hubtisch, FREETEXT6: Hubtisch mit Fahrwerk, Year :ca.1990

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Homag, Type: Rollendruckzone, FREETEXT1: Länge ca.1000 mm, FREETEXT2: 16 Stück Druckrollen gefedert, FREETEXT3: Verstellbar, FREETEXT4: Rollen Gummierung defekt,

Manufacturer: Roma Rolltor Kunststofflammele, Year: ca2000, FREETEXT1: mit Antrieb , FREETEXT2: Kunststoflamelle, FREETEXT3: 2 Führungschienen 3380 mm, FREETEXT4: Rolltorhöhe 3380 mm, FREETEXT5: Rolltorbreite 3340 mm, Year :ca2000

Tol measurements: . 0 weight max.: . t range L-W-H: . mm The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply.about usmore than 400 of our own machines in stockover 15,000 m² storage area, crane capacity 70 tmore than 10,000 items accessories for your workshopIf you want to sell machines production lines or your business, please contact us.you will find further offers on our website.viewings are possible by arrangement.we look forward to your visit.your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motorised roller table 19.3000mm year 2007 consisting of: 2 x roller tables 1300x6000mm 1x roller table 1300x4000mm 1 x roller table with longitudinal roller guide 1300x 3300mm Working width 1,300 mm Frame: painted steel frame Castors: 30 mm plastic disc castors, white Roller spacing: approx. 50 mm Stopper: spring-loaded disc stopper Legs: adjustable H-legs, height descending 900>800 mm adjustment +100 mm CE documentation ADDITIONAL: Frequency inverter for speed control

Shipping weight: ? kg Packing: 1200 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heidelberg roller feeder, machine number 160612, machine is in good condition, immediately available Iebr Sevvifieb Ta Eoau If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Rack Oven Miwe Rollin RI 1.0608-TL Electric A used rack oven Miwe Rollin electric 60x80 built in 2008 with 2 rack trolleys is currently for sale and immediately available in stock. Rack oven Miwe Rollin RI 1.0608-TL 60x80 Electric - Electric rack oven Rotary oven - Miwe Rollin 60/80 - for 58x78cm trays - Optionally with rack trolley - With drive-on ramp - With Miwe control - Nominal consumption : 72.6 kW - Year of construction 2008 More information and pictures on request

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Office chairs on 5 castors mi GS Condition New Purchase value 680,- +19 % VAT Immediately available in Blue - Black - Beige -Violet

Number of floors: 7 Einsätze Width of floors: 1000 mm Depth of floors: . mm height: 1950 mm depth: 600 mm width: 1050 mm Roller shutter defective The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table sheeter Fritsch Mini 520 0.5Lx0.5L Year of manufacture: 2013 Machine technically checked-cleaned with dry ice. Belts have signs of wear. Machine tested

Used dough sheeter FRITSCH, type: Rollfix 600 / 650 EMA 1.6K x 1.4K ALI -In bakery condition- - Computer control with touchscreen - USB and Ethernet interface - Automatic belt travel left - right - Band length: 1.6m and 1.4m - Automatic roller position - Automatic flouring - 100 programs can be stored - 18 degrees of reduction of the rollers - 8 freely programmable special reduction curves - Belts are in very good condition - Condition: Good, everything technically tested and ready for immediate use Specifications: - Roller spacing: 0.3 - 45 mm -El. Connection: 3x 400 V, 50 Hz, 3 Ph, 1.4 kW, 3.4 A - Strip width: 650 mm - Rolling speed: on outfeed conveyor 56m/min. - Weight: approx. 375 kg Viewing and test run are possible by arrangement.

Key data: 400 mm, 400 mm

1 Fixed stick/steady rest with roller quills for SUI 80 As good as new 400 mm passage

MOBERT Roller Bag maker 110 6M, for OT bags-in-a-roll with paper band, working on 2 or 3 lanes with gummed paper sleeves., Bag sizes:, Hight range 250-1500, Width 2 lanes from 150 to 460, Width 3 lanes from 150 to 300, Length 2 lane range 150 - 425, Length 3 lane range 150 - 280, Maximum speed 250 rpm, Main unwinder material width 620 - 1650 mm., Outer reel diameter 900 mm., Inner reel diameter 76 mm., Machine dimensions 11.000 x 3.650 x 2.400 mm., 380 V - 50 Hz, Constructed in 1998, excellent conditions, availability: immediate, working width: 1.100 mm., conditions: excellent, running, type: bags-in-a-roll

6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen

Information about the machine Machine type: Sidel Rollquattro F15 Machine Number: 4129 Year of Make: 2011 Operating hours: 36,484 hours Capacity (nominal capacity): 26,000 bottles/hour Technical data The Sidel Rollquattro F15 is a high-performance labeller designed to handle different bottle sizes and shapes. It offers reliable and accurate roll-fed labeling with a nominal output of 26,000 bottles per hour. Key features Suitable for PET and glass bottles Precise roll-fed labeling High cost-effectiveness and operational reliability Spare parts A wide range of spare parts is available for the machine. Spare parts can also be offered separately on request. Available spare parts (examples): Control Components Labeling units Sensors and Drives A full list of available spare parts can be provided upon request. Condition of the machine The machine is i ...

The GERNEP Rollfed 24-1056 2RA from 2013 is a reliable roll-fed labeller for PET and glass bottles with high production capacity. With 24 stations and 2 gluing units, it enables uninterrupted operation and precise labeling. Particularly suitable for the food and beverage industry.

hello for sale 2 units turbine in trailer Technical Specifications Model: Rolls-Royce Allison 570KA Year of manufacture: 2005 Fully overhauled: 2012 Commissioned: 2016 Operating hours since 2016: Only 81 hours Fuel type: Gas Power output: 4,400 kW Mounted on trailer: Yes Additional trailer: UPS trailer included Location: Paris, France loaded now Availability: Immediate Documentation: Complete (technical & maintenance records)

BELLAFORM Model RA200 Rim Roller: With driven infeed Conveyor.3 x Driven Feed Rubber Rollers for positive feed to the Heating Chamber.3 x Guide Rods water cooled, to guide Cups inside the Heater ChamberEnclosed IR-Heating Chamber Capacity 18.5 kW, Heaters with Temperature Controls.3 x Tempered Driven Brass Screws to Roll the Rims. Length of each Screw - 200 to 500 mm, depending on the Product, Screw speeds upto 850 rpm continuously variable.Cup dias. Ø 60 to 100 mmOperator Control Panel.380 V 3 ph 50 Hz Video shows the Rim Roller working Inline with a ILLIG RD70K but it will also work Inline with a ILLIG RDM75K or any another Cup Thermoformer !

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

length: ca. 1500 mm width: ca. 700 mm height over floor: ca. 840 mm : 2 St. With 2 drawers, interior height approx. 140 mm and 2 storage compartments, door height approx. 380 mm Mobile on casters, casters can be lowered so that the table remains stable when working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Used labeller P.E. Rollmatic 12.000 bph: Year: 2009 Condition: As Is EA 635 | LABELLER P.E ROLLMATIC 12T | 12.000 BPH Year: 2009 Speed: 12.000 bph Direction: Counterclockwise 12 heads Subitale formats: 1.0 LT | 1.5 LT Label: Wrap-around | OPP hot melt Safety protections Code: EA 635 More details: https://bottlingscout.com

From a current recycling we offer you a well-maintained motorhome from Rollerteam on chassis Fiat. Year of Make: 2020 Registration date: 11.2020 Condition: good KM.: 40100 Asking price: 36.000 € net VHB Equipment / accessories / other information: Automatic, 160 hp engine, Comfort package, Panaroma Sky Roof, full car. Satellite antenna, trailer hitch, and much more. Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 32257 Bünde The sale is without warranty

Sheeter Fritsch Rollfix 3WK 520 for all doughs for rolling out and touring Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine

Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital posi ...