3 roll used for sale

Deutz emergency generator set 300 kVA Emergency system - - - - - Engine - Deutz (Germany) - 12 cylinder V12 -Diesel -Water-cooled - 1500 rpm - - - - - Generator - Manufacturer: AvK A. van Kaick (Germany) - 300 / 330 KVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - The generator set is purely an emergency system - The device was used for emergency power protection in a hospital - Regular maintenance and test runs were made - The motor runs well and the generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Deutz generator set 300 / 330 kVA - Consisting of the Deutz engine and the AvK generator - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - In order to be able to give an exact freight price please send me a request with your postal code - - - - - Price: - 12.750,- € + 19 ...

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

Built in 2001 Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h min 4.000 c/h Working height feeder 1.100 mm Equipment o main product feeder (shuttle feeder for perfect bound books) o opening station with sucker and sword o 4 insert feeder o delivery to the right

Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...

We offer 18 pieces Peri Trio 330 x 240 elements refurbished. Newly covered with original Peri Finply formwork. Frame cleaned, primed and painted with zinc phosphate coating. 50% discount on the new value of 3683,00€ = 1841,50€/ piece. Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

Unused Düchting Centrifugal Pump Type HK200x6 Year of construction 2015 Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 300 m³/h H 490 m N 1480 1/min P 560 kW Further Düchting pumps in stock Applications: Conveyance of contaminated, chemically neutral or aggressive liquids with up to 10% solids content. Main water drainage in mining Secondary water drainage and mine air cooling in mining Pressure boosting systems in industrial processes Water supply and water treatment plants Condensate conveying Mineral fertilizer industry Oil & Gas Applications LHK125x6 HK150x11 Q150m³/h H730m n1485 1/min P430kw HK250 HPXU100x10 Q90m³/h H250m n1485 1/min P100kw HK150x5 Q163m³/h H325m n1485 1/min P210kw HK150x9 Q220m³/h H435m n1485 1/min P435kw HPXU150-200x5 Q150m³/h H665m n1485 1/min P415kw HK200x6 Q480m³/h H470m n1485 1/min P792kw HK200x4 Q500m³/h H265m n1485 ...

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Supports NOE 20-300 / NOE 20-350 , used Work economically, quickly and safely with robust Euro construction supports according to EN 1065 High load-bearing capacity Permissible column loads according to EN 1065 Long service life due to -Hot-dip / piece galvanizing -strong head and foot plate Low weight Wide adjustment range Protection against injuries caused by crushing protection 247 x Supports NOE 20-300, used, EUR 21,60 per piece 6 x stacking rack, galvanized, used, EUR 135,00 per piece 265 x Supports NOE 20-350, used, EUR 27,50 per piece 7 x stacking rack, galvanized, used, EUR 135,00 per piece Props NOE 20-300 / NOE 20-350 , used Work efficiently, safely and quickly using robust Europrops in accordance with EN 1065 High load capacity Allowable prop loads in accordance with EN 1065 Long service life through -Hot dip / discontinuous galvanising -Str ...

technical details: - Position: GR 360 (pos. 5) - Diameter suction nozzle: 250 mm - Diameter pressure nodle: 250 mm - Steel impeller: curved - Air volume flow (V nominal): 5,400 m³/h - New engine Engine data: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 13.7 A - Frequency: 50 Hz - Speed: 2,920 rpm Dimensions (H x W x D): 1,130 x 850 x 690 mm Transport dimensions (H x W x D): 1,300 x 800 x 1,200 mm (on EURO pallet) Weight: 250 kg Consoles and vibration dampers can be requested and supplied on request. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Te Koop: Samson for Type: 3804 Druk: 0.016 - 0.4 bar maximum druk 0.76 bar. Prijs is incl. BTW

Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.

technical details: • Position: GL 360 (pos. 1) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,380 m³/h • Pressure increase: max. 2,000 Pa • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 560 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 3.0 kW • Voltage: 380 V • Current: 6.15 A • Frequency: 50 Hz • Revolution: 2,840 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

DOUBLE KNIFE GUILLOTINE WITH GLUE APPLICATOR Manufacturer_ F+R?Model_ 45/3400? Max. cutting length (grain direction)_ 3400 mm? Min. cutting length (grain direction)_ 1050 mm Cutting width (cross grain) continuosly_ 65/450 mm Cutting width (cross grain) discontinuosly_ 450/800 mm

MULTI RIP SAW type CML SCA 320 with rip trimming unit with two circular blades with adjustable interaxle ( one moving saw ) Technical Details : carpet width mm. 320 max. cutting heigth mm. 120 minimum length of pieces mm. 300 blades diameter : min.mm.250 / max.mm.350 maximum distance between two external blades mm. 320 feeding speed mt/min. 0 / 36 motor power Hp 40 net weigth kgs. 2000 volt. 380/50

technical details: • Position: GR 360 (pos. 5) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,820 m³/h • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 590 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 4.0 kW • Voltage: 380 V • Current: 8.4 A • Frequency: 50 Hz • Revolution: 2,885 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

6-Achsenmessgelenkarmsystem Manufacturer: Zett-mess Type of machine: AMPG - 36 p Year of construction: 2003 2 same facilities are available. The price is for a plant. All information without guarantee

CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 59900 Net price: 12882EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with large ...

Description Filler Handtmann model VF300 is a computer controlled vacuum filler offering very high performance with innovative technical solutions applied. Model VF300 is ideal for the production of meat products and find it applies in large and small manufacturing plants. The device is a very accurate-allows you to achieve the highest quality of the product. Handtmann applied in your device pneumatic lift mechanism for automatic loading. Specification: Brand: Handtmann Model: VF300 Volume: 300 L Dimensions: 2030 x 1750 x 1400 (mm) Power supply: 400V 50 Hz 3N Power: 6.5 kW

Torque test bench Manufacturer: BLM (Atlas Copco) Type: 3730M Built in 2001 All information without guarantee

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 302 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: small 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

; ready for operation

Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

LEYBOLD pump stand consisting of: Pump 1 LEYBOLD Sogevac SV 300 (optional with water cooled or air cooled) pump 2 LEYBOLD Ruvac WAU 1001 H Each pump or the entire frame can be readmitted. A warranty is a complete overhaul of 12 months. Multiple racks, versions available!; ready for operation

MULTI RIP SAW type GABBIANI SA 300 Technical Details : carpet width mm. 300 max. cutting heigth mm. 100 blades diameter max.mm.300 feeding speed mt/min. 0 / 36 motor power Hp 30 net weigth kgs. 1600 volt. 380/50

Block vane vacuum pump status: used, tested, working Manufacturer: Kinney Type: KT-300 D Engine: 400V Resources: Mineral oil Nominal: 25 m ³/h Discharge pressure: < 0.008 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation

We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055

CATALOG NO. 6911 TECHNICAL SPECIFICATIONS - track width 350mm - shaft width 370mm - max cutting height 200mm max dial diameter: - on the upper shaft 340mm - on the bottom shaft 300mm - disc bore diameter 80mm in advance: - repellers - 2 pressure sliding shafts -Pressure - shaft with saws 37kW - 2 smooth sliding shafts from below: - introductory table + guide strip - repellers -caterpillar - shaft with saws 37kW -caterpillar - 1 output shaft, slip, smooth - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up / down 1,1kW - automatic central lubrication - electrically adjustable smooth regulation of the feed speed 3kW - diameter of extraction connection 230mm, 250mm - dimensions length / width / height 3000x2300x1900mm - weight about 5000kg ADVANTAGES – Italian production – two-shaft – used multi-saw, very good condition Net price: 19890 ...

Enrobing machine manufacturer: Kreuter Type: Liliput i S 305 Year of manufacturing : 1987 work width: 305 mm electrical: 400 VAC Complete line 12,4 kw different: speed variabel between 0,7 and 2,1 m/min, with regulable Vibrator, bottom stripper, Product touching parts in stainless steel ex Warehouse Hessisch Lichtenau, unpacked

Type Z.32c Ser. Nr. 040306 Cutting length 3200 mm Cutting width 3200 mm Max. saw blade protection 80 mm Compressed air pressure 6 bar Main motor 7,5 kW Max. saw blade feed speed 13.5-27 m/min Air cushion tables 4 Scoring unit 1,5 kW Made in Italy Weight 2880 kg

Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication

FOR SALE 2 SET MAK 6M 332AK ENGINES HAVE A GOOD DAY SIR. WE VE 2 SETS COMPLETE MAK 6M 332AK ENGINES ON STOCK NOW. ENGINES ARE IN GOOD RUNNING CONDATION. BOTH ARE READY TO LOAD ON TRUCK. PLS FIND ENGINE SPEC AT BELOW... PRESENT CRANKSHAFT ARE STD SIZE MEASURMENT. TURBO CHARGERS ARE BBC RR-212 6 H MAK 6M 332 AK POWER 960kW RPM 720RPM YOB 1981 SERIAL NO.. 33352/33353 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E-mail: info aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Working width: 3050 mm sheet thickness: 6 mm throat depth: back gauge: 650 mm power: 380 V, 16 kW space: 3680 x 2060 x 1870 mm weight: 7580 kg

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

all stainless steel capacity 300 L. (= ± 10CF) Double Ribbon mixing arm Dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved 2 speeds: 16 en 32 rpm 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: herbs, ingredients, powders,…

Merkle Insquare 300 AC/DC welding system Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A TIG AC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A Electrode welding operation: Rod electrodes: 1.5-6 mm Open circuit voltage: 80 V Working voltage: 20-32.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A  ...

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

length: 300 mm width: mm height: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer a Peri Trio formwork system 319m² complete with accessories in ready-to-use condition. The formwork was cleaned, inspected and sealed with zinc phosphate coating corrosion. Can be used for SB2/3 without any problems. New value approx. 225250,00 € special net price = 61515,00 € corresponds to 73% discount on the new value. On request also smaller or larger quantities, or available individually! Number of pieces Designation Elements TR 270 12 Element TR 270 x 240 top used formlining 12 Element TR 270 x 120 top used formlining 32 Element TR 270 x 90 top used formlining 42 Element TR 270 x 72 top used formlining 5 multi-purpose element TRM 270 x 72 top used formwork lining 10 Element TR 270 x 60 top used formlining 8 Element TR 270 x 30 new formwork lining 2 shuttering elements TR 270x 24 new formwork lining 6 corner TE 270-2 new formwork lining Accessorie ...

Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg

Machine type: welding rotary table Make: Merkle / Conzelmann Type CD 50/25 - 320 Connection voltage 1 x 230 V Speed range 0.25 – 2.5 rpm, infinitely variable Speed control 1 : 10 Torque 2.5 – 10 Nm Face plate diameter 250 mm Face plates - internal passage 10 mm Tilt angle of the face plate 135° Vertical load capacity 0.5 kN = 50 kg Table height 320 mm Tilting movement manual, clampable Tipping torque 90 Nm Pantograph 400 A 80 % d.c. Connection for - foot switch simple - Double foot switch - Foot remote control Age 3 years Condition: as good as new Weight 44 kg Warranty 24 months from the date of delivery Original price €2,198.00 + VAT Offer price €1,690.00 + VAT Foot switch simple with 3 mtr. cable 239.00 € + VAT 019.0.2900 Double foot switch with 3 mtr. cable 389.00 € + VAT 019.0.2901 Foot remote c ...

Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg

Technical data: -max load capacity 300 kg -maximum clamping diameter approx. 1500 mm -Chuck diameter 300 mm -Bore hollow shaft approx. 60 mm -Rotation Electr. infinitely variable - right - + links - course -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 800 x 1150 x D 700 mm -Weight approx. 500 kg

Key data: 240 , 300 , 400

Emergency power system NSA as a backup power system with a nominal power of 300 kVA with Volvo Penta engine TAD 842 GE grid-parallel Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine Model: TAD 842 GE Engine No.: on request Engine power: 273 KW PRP | 299 KW LTP Cooling: Water-cooled Tempering: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 + Diesel B 7 Generator manufacturer: Stamford AvK Generator type: S4L1D-D Gene. No.: on request Generator power: 300 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Tank: Design: Base frame tank with drip pan Capacity / litre: 500 Dimensions of the power unit: Width approx. mm: 1.350 Height approx. mm: 2.370 Length approx. mm: 3.770 Weight approx. KG: 3.700  ...

Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base

Axles: 6 Type: S3Q883-1-1 Load: 3kg Range: 677mm Year of construction: 2004 Condition: used spare parts carrier Accessories: Cable, handheld MCP 4, control, adept CIP 2

Execution: Aggregate type: stationary Execution: Skid frame Technical data engine: Engine manufacturer: MTU Engine: 20 V 4000 G 34 F Engine No.: in production Power: 2590 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous with AVR Gene. No.: in production Generator power: 3000 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 2000 Dimensions of the power unit: Width approx. mm: 1.887 Height app ...