129,812 used machines on RESALE, but how to find them? Machine Search
CONTROLS electronic controls SCHMIDT PRESS FORCES total force (nominal): 0.25 to PRESS TABLE table surface (left-right): 180 mm table surface (front-back): 150 mm SLIDE slide force: 0.25 to stroke: 100 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 35 kg This is an assembly press with force-displacement monitoring. • Operating hours: approx. 150 • Condition: very good, almost like new • Features: Press force monitoring, two-hand operation • Stroke: 100 mm • Tool dimensions: 150 x 100 mm • Press force: 0.25 tons
Ideal 3915-95 Year: 1996 cutting width: 390 mm pile heifht: 40 mm Electric cutting manual size change manual clamping
saw blade diameter: 800 x 800 x 1500 mm cutting diameter: 200 mm stroke: 150 mm dimensions of the machine ca.: m total power requirement: 3 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ITEM NO.: EM354-VA-WA - Flow rate 7 500 / 15 000 ltr./h - Speed 350 / 700 min-1 - Stainless steel housing - Connections suction side Garolla NW 120 - Connections can be customized on request - Pressure spout NW 65 - with new stator - 1 year functional warranty
Item No. ZENIT400-30-ST - Filter rack complete with wine thread and end plates - without filter plates - Filter requires an odd number of filter plates - 1 year functional warranty
CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions
A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible.
sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.
ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...
Inv. Num. : 9039 Type: QIROX QRC 350 Producer: CLOOS Created: 2017 Parameters: Control System: V6-9 Advanced Maximum arm reach: 3400 mm Maximum load capacity: 15 kg The workstation consists of 3 stations and the following components: CLOOS QIROX QRC 350 robot Track Optical barrier Workpiece Positioner
Used piston homogenizer from GEA type Ariete NS 3075. Maximum working pressure 20 MPa. Capacity 10,000 litres/h. Control.
Key data: 350 , 53 , 28
BOY 35 E injection molding machine Type : 350-92 35E?Year: 2014?Screw diameter : 28 mm?Injection pressure: 1639 bars?Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr?Clamping Force: 35 T?Distance between tie bar bar: 280 x 254 mm?Mould installation height min : 200 mm?Plate distance max : 500 mm?Dimensions: 2400 x 820 x 1950 mm?Weight: 1195 kg
Transnorm conveyor belt GF 15600-900-800 RA2217 Technical data: Conveyor length (NL): 15600mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA47/T DT80 N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 15600 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor spe ...
Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg
Used Alfa Laval self-cleaning disc centrifuge, type MAPX 309BGT-14-60. Centrifuge after technical inspection. Replaced bearings and seals. Capacity approx. 10m3 /h
Dough divider/weigher 1 chamber machine Weight ranges: approx. 100 - 1,100 g/piece with digital control with lubrication with extended hopper for approx. 200kg dough
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Tennant, Permanent Magnet Motor Type 377425 -Power: 0.74 kW -Speed: 2200 rpm -Voltage: 36 V -Gearbox: Regal-Beloit 7722703-SJ -Translation: 7.5 : 1 -Shaft: Ø 19 x 35 mm -Dimensions: 395/210/H195 mm -Weight: 21 kg
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg
High pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial blower, high pressure blower -Manufacturer: Spelleken, high pressure blower type VRU-15-100-30H 1 -Drive motor: Holder 3 kW -Speed: 1430 rpm -Volume output: 0.25 m³/s -Pressure pt: 49.5 mbar -Connection input: Ø 105 mm -Connection output: Ø 105 mm -Bolt circle: Ø 180 mm -Dimensions: 900/510/H910 mm -Weight: 81 kg
Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece
Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 0.3/1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 150 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2120/300/H540 mm -Weight: 168 kg
Motor bracket, electric motor bracket, motor bracket, electric motor bracket, motor bracket, motor bracket, plummer block housing, plummer block housings, bearing block -Length: 400 mm -Width: 367 mm -Height 90 mm -Support arms: adjustable - Dimensions: see photos -Quantity: 3 motor mounts available -Price per piece -Weight: 16.5 kg
Industrial vacuum cleaner, vacuum cleaner, dust extractor, industrial vacuum, floor vacuum, safety industrial vacuum, polyurethane hose, extraction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose coupling, hose connectors, hand tube -Manufacturer: Nedermann, coupling plug for vacuum hose Ø 38 mm, unused, original packaging -Type: M50-38P -Coupling piece: Ø 50 mm -Number: 38x hose couplings available -Price: per piece -Dimensions: Ø 60 x 90 mm -Weight: 0.1 kg/piece
Separating clutch, adjustable gear motor, variable speed gear motor, electric motor -Spare part comes from a Heyligenstaedt type Heycop 3UN / 2000 -Rapid traverse: for lathe -Gearbox manufacturer: SEW -Motor manufacturer: SEW type DFW80K-2BS -Motor power: 0.75 kW 2760 rpm -Gear output speed: 1480 rpm -Brake and clutch: 24 V -Hollow shaft: Ø 25 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 615/350/H240 mm -Weight: 56 kg
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 210 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 15 kg / pc.
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 270 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 16 kg / pc.
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: ip, sheet metal gripper lifting clamp IPHTONZ -Clamping range: 0 - 30 mm -Load capacity: 0.375 t -Dimensions: 115/80 / H170 mm -Weight: 2 kg
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 385 mm -Total length: retracted 683 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 9 pieces -Price: per piece -Dimensions: 683/145/H270 mm -Weight: 41 kg/piece
Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Spare part: Stop bar comes from a Dorsten BBM press brake, type: APE80-3050 -Servo motor: Manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length (unit of measurement) approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 302 mm -Total length: retracted 640 mm -Mount: Bore Ø 40 mm -Quantity: 2 pieces -Price: per piece -Dimensions: 640/145/H210 mm -Weight: 38 kg/piece
Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Gearbox Lenze type 52.308.06.10 PGLP680 -Engine: away type AL90S/L-4 -Power: 1.5 kW 139 rpm -Speed speed: 139 rpm -Design: B5 angle -Shaft: Ø 28 x 70 mm -External fan: 0.05 kW wistro type A2E170 -Protection rating: IP55 -Quantity: 1 piece -Dimensions: 580/230/H245 mm -Weight: 40kg
Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers -Manufacturer: Schuhmann, switching amplifier -Type: SV 5.20G-312 -Price: per piece -Number: 4 piece -Dimensions: 80/23/H105 mm -Weight: 0.1 kg/piece
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Manufacturer: Holex, soft attachment jaw set, 3-piece, 315 -Type: 313310-315 -Width: 35 mm -Dimensions: see photo technical drawing -Overall dimensions: 145/105/H55 mm -Total weight: 5.2 kg
Telescopic conveyor belt, conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, telescopic conveyor, unloading telescope, loading telescope, telescopic belt conveyor, telescopic conveyor belt -Speed: 32.4 m/min -Drive: 0.75 kW -Belt width: 800 mm -Length 2590-3180 mm -Drive: clockwise and anti-clockwise rotation (for loading and unloading) -Load capacity: up to 50 kg/m -Working height: mm -Transport dimensions: 2590/1400/H1250 mm -Weight: 960 kg
Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 395 mm -Length: 512 mm -Groove width: 14 mm -Groove spacing: 64 mm -Dimensions total: 512/395/H65 mm -Weight: 71 kg
Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo -Dimensions: 350/400/H1130 mm -Weight: 80 kg
Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, centrifugal fan type DKHR 310-4 -Speed: 1370 rpm -Lesitung: 0.15 kW -Protection rating: IP 44 -Quantity: 12x blowers available -Price per piece -Dimensions: Ø 310 x 165 mm -Weight: 5.5 kg/pc.
Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor, inclined conveyor belt -Conveyor belt: can be used as a steep conveyor -Speed: 32 m/min -Drive: 0.55 kW with brake -Belt width: 360 mm -Max. Length: 3900 mm (3100/800 mm) -Conveyor belt: can be adjusted in angle -Transport dimensions: 3900/550/H650 mm -Weight: 232 kg
PTC relays, contactors, semiconductor contactors, relays, fiber optic converters -Manufacturer: Phoenix Contact, DIN rail power supply -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No.: 2938594 -Number: 3x power supply units available -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg
Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: Servo Power Supply -Type: TVM 1.2-050-220/300-WO/220/380 -Item: 232270-04397 -Price: per piece -Number: 2 pieces -Dimensions: 390/105/H325 mm -Weight: 14.8 kg
Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm -Measurements: see photos -Dimensions: 400/1130/H665 mm -Weight: 192 kg
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Parker, hydraulic cylinder, stroke 625 mm -Type: U-3LRS33M -Piston rod: Ø 35 mm -Receiver: Shaft Ø 25 /10 mm -Cylinder: outer Ø 70 mm -Quantity: 2 cylinders available, different mounting plates (see photos) -Price: per piece -Dimensions: 820/76/118 mm / 820/118/118 mm -Weight: 14.8 kg/pc.
maximum number of results exceeded
please refine your search
