3 roll stack used for sale

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Oil filter Fleetguard LF3749. For the following manufacturers / engines: Liebherr Gas Engines, John Deere - 950J D936L 2001 2 John Deere - 950C D9306T 1 John Deere - 1050C 1 Liebherr - R 940 DEMOLITION D944-A7-25 2021 1 Liebherr - R 926 IV/4F D934A7-04 2021 1. Further information can be found from the manufacturer at the presence. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E ...

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

Key data: 7 KW

A total of 6 starters for sale by Bosch for Liebherr Gasmotoren 1021 8368. Technical details: Volts: 24 volts Power: 7.8 KW Number of teeth: 11 Hole attachment: 3 Direction of rotation: right Riginal numbers are for comparison purposes only: Starter Bosch 0001330013 Starter Bosch 0001330069 Starter Bosch 0001330070 Starter Bosch 0001383037 Starter Bosch 1986S10003 Starter Bosch 1986S10004 Starter Liebherr 10218368 Starter Liebherr 11386646 Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades o ...

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Technical data of the pallet rack crossbar: Shelving system: Arestant Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Truss Type: 10515CN Agraffe: 4 HK (hooks) Clear width: 3,300 mm max. load per pair of trusses 1,500 kg, with the same. distributed load. ( Observe field load ) 02x Safety pins, new Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

For sale is a high-precision in-circuit test system (ICT) from the market leader SPEA, model 3030C BU100 in the compact version. This machine was used in our production in China for specialized testing tasks. In order to guarantee you a smooth takeover, we will take care of the transport of the machine to Germany for you if you make a purchase. The system is fully equipped, including digital pin electronics, high-precision stimuli and a powerful on-board programming (OBP) module. Key Features & Technical Highlights: System Configuration: Model: SPEA 3030C BU100 Compact (Colour: RAL 9010 Pure White) Footprint: Only 970 x 670 mm – ideal for installation close to the line. Interface: Pylon vacuum interface (max. 12 blocks), currently equipped with 10 pylon blocks. Test Channels: Prepared for up to 1024 channels. Powerful control computer: Industrial PC wit ...

Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. New heat-resistant silicone membrane, extremely stretchy and easy to clean. Can also be used for forming preheated thermoplastic materials such as acrylic glass or solid surface materials. Inner frame dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks each 200 liters, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run constantly Mobile on four swivel castors, lockabl ...

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic , Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Honing machine, SUNNEN EC3500, (like ml3500 ml5000 ml2000), this machine is currently under complete electronic retrofit (Siemens / Telemecanique), Touch screen. Loader interface possible

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Key data: 300 t

DURENDUS 300 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 22.450 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement  ...

Earthmoving Equipment for Sale John Deere Excavator 350G Category: Large Excavator Application: Heavy excavation, bulk earthworks, quarry & infrastructure Key Features: Powerful and fuel-efficient diesel engine Advanced hydraulic system for smooth multi-function operation Deep digging capability for large-scale projects Reinforced boom and arm for durability Comfortable operator cab with modern controls Ideal For: Road construction Mining & quarry operations Large foundation works John Deere Excavator 470P Category: Production-Class Excavator Application: High-production earthmoving and mass excavation Key Features: High horsepower and lifting capacity Optimized fuel consumption with advanced engine tech Smart hydraulic system for faster cycle times Heavy-duty undercarriage for tough terrain Operator-focused design for comfort and visibility Ideal F ...

Máquina serigráfica con 1 cabezal Área máx. impresión: 340 x 380 mm Ancho máx. de banda: 350 mm Diámetro máx. de bobina: 700 mm Registro por marca Desbobinador y rebobinador independiente Secado UV

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375

Key data: 1045 KW, 600 V

Surplus/Never used, Zero Hours, Caterpillar 3512C, Land Drill Module 1045 kW Prime Power, 600v, 1200 RPM, 0.733 P.F. with Jacket Water Heater, Air Cleaners, Radiator 46/CVS, 12" Spark Arrester Muffler, EMCP Control Panel, Simplex Oil Filter, designed for Petro Drilling applications, zero hours, from year 2015.

table length: 3000 mm table width: 3000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 320 mm turning length: 750 mm control: Siemens type: 810DL CCUO turning diameter over slide rest: 150 mm cross movement: 185 mm spindle passage: 52 mm turning speeds: 14-3550 U/min transmission ratio: 2 quill stroke: 120 mm rapid traverse: 6 m/min main drive motor: 7 kW 3-jaw-chuck diameter: 200 mm total power requirement: 10 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,6x1,44x1,44 m 8950 turning hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mm swing diameter: 4000 mm turning height: 3150 mm slide adjustment: 1700 mm table load: 25 t turning speeds: U/min Feed: mm/U digital readout: Heidenhain Rest: 2 Side head: total power requirement: 90 kW weight of the machine ca.: 95 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool diameter: 300 mm length: 300 mm weight: 80 kg range L-W-H: 800x400x750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm spindle drive: 46 kW Feed: 10000 mm/min Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of Lo ...

x-travel: 3500 mm y-travel: 1000 mm z-travel: 1300 mm Control: Heidenhain type: TNC 155 surface area: 3700x1120 mm power capacity: 26 kW transmission ratio: 2 turning speeds: 40-2000 U/min spindle taper ISO: 50 Feed: 3000 mm/min Rapid movement: 8000 mm/min total power requirement: 40 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t passage width: 1350 mm stroke: 500 mm column travel -side: 830 mm table surface area: 1350x1380 (1870x1380) mm table height: 1060 mm total power requirement: 45 kW weight of the machine ca.: 20 t dimensions of the machine ca.: BxTxH 2500x2000x3950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,

Fully Automated Craft Brewery 30hl/brew with Meura Mash Filter This fully automated 30 hl craft brewery, installed in 2015–2017, is in excellent condition and represents high-end European brewing technology. The system is a complete, turnkey solution including all necessary auxiliary equipment. The brewery is still installed and fully operational. The brewhouse has a capacity of 30 hl per brew and is capable of producing approximately 6–8 brews per day. It features a traditional three-vessel configuration equipped with a Meura mash filter for efficient wort separation. The brewery has been used to produce a wide range of both filtered and unfiltered beer styles. The cold block includes 3 × 75 hl fermentation tanks and 2 × bright beer tanks. Additionally, the system is equipped with advanced beer filtration capabilities, including a GEA centrifuge (unitank-compatible), kies ...

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 24 mm -Dimensions: 300/205/H635 mm -Weight: 62 kg

Checkweigher Manufacturer: Mettler-Toledo Type CM 3571 AdvancedLine Year of construction 2020 Max. belt speed 35m/min. Throughput 60 pcs/min. Weighing range 0 - 6,000 gr. calibrated weighing range 80 – 6,000 gr. It is a high-quality combination of scale and tester Customer-specific sorting, MID conformity 1st stage, infeed conveyor, collection container, outfeed conveyor, covers, FreeWeight Nt incl. statistics, HMI 15" incl. AdvancedLine software, multi-resolution load cell, pusher, signal device, weighing technology EMFR load cell, user management, machine status monitoring, sensor monitoring, emergency stop button, Tesco Standard 2 sorting Profile LS Combi Metal Detector: Opening width 350 mm Opening height: 150 mm Operation Sequence: 100/300/800

For sale are 4 pieces of fully overhauled turbochargers from the manufacturer ABB. These turbochargers have an operating time of 0 hours since their complete overhaul and are therefore in mint condition. 1 piece turbocharger Z140, Ref. P/N: 634433 1 piece Turbocharger Power2 340-H44 HP, Ref. P/N: 1205685 1 piece turbocharger Z140, Ref. P/N: 634434 1 unit Turbocharger Power2 340-H44 HP, Ref. P/N: 1205686 The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any questions or for more information. We look forward to your inquiry. Connection dimensions suitable for the following motors: - Jenbacher J624

Key data: 2150 KW, 1200 1/min

Available Export-Only Engines stocked in the USA. Engine #1 Model: Caterpillar 3516C-HD engine Serial Number: PM300141 Year: 2013 Power Rating: 2150 HP at 1200 RPM Hours: ~20 (test hours only – new surplus) Certification: EPA Tier 2, ABS Certified, IMO Compliant Included: Engine air cleaners Additional Work Scope: Removal of the existing heat exchanger and piping Installation of a radiator cooling system setup Engine #2 Model: Caterpillar 3516C-HD engine Serial Number: PES00745 Year: 2012 Power Rating: 2150 HP at 1200 RPM Hours: ~130 (test hours only – new surplus) Certification: EPA Tier 2, ABS Certified, IMO Compliant Included: Engine air cleaners Additional Work Scope: Removal of the existing heat exchanger and piping Installation of a radiator cooling system setup Mounting on a customer-provided skid base Key Notes Both units are new surplus, with o ...

Raimann KS 310 Technical Data – KS 310 Max. cutting width: 310 mm Max. passage width: 650 mm Max. cutting height for multi-blade equipment: without pressure screen: 120 mm with pressure screen: 105 mm Min. cutting height: 10 mm Min. workpiece length: Standard version with pressure screen: 450 mm Machine data Chain width: 340 mm Saw shaft diameter: 65 mm Diameter of socket: 80 mm Max. saw blade diameter: 360 mm Min. saw blade diameter: 250 mm Saw blade bore (DKN 18×3.5 mm): 80 mm Saw shaft speed: 3900 rpm Feed speed, infinitely variable: 4–45 m/min Working height (from floor to top of the chain): 850 mm Weight approx.: 2200 kg Dimensions of the machine: see installation plan Suction data Chip extraction (printing unit) – extraction connection dimensions: Diameter: 250 mm Air speed: 30 m/s Air volume: 530 ...

Used, robust meat grinder (free-standing device) from Bizerba, type FW 98/32T for use in butchers, commercial kitchens, gastronomy and food retail. This device is particularly characterized by its solid construction and strong motor power. With this meat grinder you will achieve perfect results. Meat or plant-based foods are crushed and not crushed. The device can then be cleaned quickly. The machine housing and the filling tray of the compact machines are made of stainless steel. Technical data Dimensions: H 1140 mm | W 550 mm | T 800 mm Inner dimensions of the tray: H 100 mm | W 510 mm | L 760 mm Power supply: 380 V Power: 2.8 kW Material: Steel, anti-corrosion The device has been cleaned and tested. We would like to point out that with regard to the Product Safety Regulation, the product offered here is intended exclusively for commercial use. An assignment by ...

PILOUS ARG-300F metal band saw was built in 2024 in the Czech Republic by PILOUS-pásové pily, spol. s r.o. The machine is in perfect technical condition, practically unused – only a few test cuts were performed on it. The PILOUS ARG-300F is an extremely versatile machine designed for both industrial plants and professional workshops. It is ideal for precise cutting of workpieces made of, among others, stainless steel and tool steel at an angle of 90°, +45° and +60°. Cutting is performed by means of a reliable saw blade, driven by a powerful electric motor with worm gearbox. The cutting speed is adjustable in a range from 15 to 90 m/min with the use of an inverter. Stable clamping of the workpiece, on the other hand, is ensured by a massive quick-clamping vise. The machine’s design is based on a robust arm made of high-quality grey cast iron. This solution guarantees high r ...