3 layer used for sale

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

RECON Part Number: 189240/101477 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

Manufacturer: Leica Model: INS 3000 Year of Manufacture: 2001 Electrical Specifications: - Voltage: 115/230V AC - Frequency: 60/50 Hz - Current (I max): 10 A - AIC of Overcurrent Protection Provided: 50 kA - Number of Phases: 1 Laser Classification: Laser Class 1 CE Marked : YES Condition : Good Find more here - / Contact us at -

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Ipeka Made in Finland Description Ipeka 2R industrial slicer 13 mm thickness oiling system stainless body good working condition Sale on behalf of customer

Recon Part Number: 550 140 26 09 B1 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 31 09 B2 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 30 09 B3 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 34 01 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 27 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 32 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 29 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 33 01 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 551 142 16 01 On the turbo Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 52 54 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 50 54 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 003 151 55 01 Bosch 0 001 510 003 / 9KW Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 115882 0.265-10.05F 312119 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 174497 0653 321 00 05 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 174344 0653 321 00 02 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Inv. Num. : 8772 Type: TruLaser 3030 L20 Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 35157 h Switch-on hours: 55771 h Laser power: 3.2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Feed length Z-axis: 150 mm

Year: 2019 - technically efficient, ready to work – after full service - working length: 3500 mm - adjustable leg height - roller width: 240 mm

Deze extruder lijn van Kuhne staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 2008 en verkeerd in prima staat. Merk: Kuhne GmbH Model: K 60E - 33D Typen schroef: enkelschroef Bouwjaar: 2008 Schroef Ø: 600mm L/D-verhouding: 33 Hoogte cyclinder: 425 mm Bls Ud Dou Etygevycep Kegelhoogte: 325 mm Total height: 750 mm

EBO 68 - 320 IS 600 Electrical deck Oven with 4 decks and proofer Dimensions: 4 x 60x80cm For 2 plates 60x40cm The Oven is complete stainless steel Easy to clean Power of 1 deck: 4.85kW Voltage: 400V / 50Hz / 3/N/PE

Cutting table SEEWER RONOD, type: SFT 362, A23 -refurbished- - Cutting table for pastries - Cutting section - with some cutting blades and cutting rollers -Reel More information on request. Visits and test runs are possible by arrangement.

Injection moulding machine for PET preforms

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Manufacturer: MAN Model: TGA 28.320 6x2-4BL Year of Manufacture: 2007 Engine Power: 235 kW (320 HP) Fuel Type: Diesel Engine Capacity: 10,518 cm³ Axle Configuration: 6x2-4 Permissible Total Weight: 27,000 kg Permissible Axle Loads: - Axle 1: 8,000 kg - Axle 2: 8,000 kg - Axle 3: 11,000 kg Unladen Weight: 19,000 kg Gross Vehicle Weight Range: 27,000–26,000 kg Wheelbase: 3,500–3,050 mm Tire Sizes: - Front: 315/80 R22.5 - Rear: 385/65 R22.5 Body Type / Equipment: FAUN Powerpress 524 Special Features: - Müllwagen (Refuse Compactor Truck) - Equipped with FAUN Powerpress body system - Red reflectors on foldable components as per StVZO exemption - Noise class: EG Lärmarmer (low-noise vehicle) Find more here - / Contact us at -

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Cup printing machines

Maximum Diameter: 110 mm // Minimum Diameter: 32 mm

Type Of Laminator: Solvent and Solventless // Working Width: 1315 mm

Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight approx. 6500 kg

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process

Manufacturer: HAEUSLER Model: HPR 330 V+H Year of Manufacture: 2007 Approximately 10 pallets of tools for round bar processing are included, with diameters of 60.5, 137, 91, 168, 76, 51, 152, 129, etc. Condition : Machine currently not in use and therefore not fully assembled Technical Data: - Maximum bending moment (at 240 N/mm² yield strength): 200–330 cm³ - Number of bending rolls: 3 - Roll arrangement: asymmetric / symmetric - Roll diameter: 520 mm - Driven rolls: all 3 - Roll drive: hydraulic - Working speed: 0–7 m/min, stepless - Speed compensation between upper and lower rolls: automatic - Roll rotation reversal: electro-hydraulic - Adjustable bending rolls: 2 - Adjustment of bending rolls: hydraulic - Roll position display: digital, 0.1 mm accuracy - Roll bearings: roller bearings - Number of pressure roller systems: 2 - Adjustment of pressure roller systems: hydrauli ...

Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible.

max. wheel diameter: 360 mm gear width: 180 mm max. module: 7 min. module: 0,5 Control: Reishauer 0: max. 180 mm tooth width: max. 180 mm min. number of teeth: 10 max. number of teeth: 600 max.helical angle: 45 ° max. workpiece weight: 60,0 kg grinding wheel width: 84 / 104 mm grinding wheel diameter: 280 / 350 mm Spindle Speed: 1.100 - 1.900 min/-1 grinding spindle turning speeds at profiling: 52 - 95 min/-1 total power requirement: 24 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 5,0 x 8,0 x 3,0 m - CNC Control Reishauer - CNC Dressing Unit - Exhauster - Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Emmegi under-table cross-cut saw with automatic stop Type: Calvet 300 M saw blade coming from below max. saw blade diameter 300 mm with automatic stop – Fence pushes the clippings onto the the cutting position right long table with automatically movable stop left long roller conveyor Weight approx. 500 kg with stop table and roller conveyor

Control: OSP-300LA Year of Make: 2019 Distance between tips or spindle lugs: 1085 mm Circumferential diameter over carriage / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm Travel C-axis: 360 mm Travel W-axis 895 mm Main spindle speed: 45 - 5,000 rpm Sub-spindle speed: 45 - 6,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: Conveyor One touch IGF Touchsetter 2x 3-jaw chuck Sub-spindle Coolant Plant HMF-980 Suction

Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg

Key data: 600 mm, 375 mm

ELB Optimal 6375 SPS, year of construction 1995, grinding area 600 x 375 mm, the machine has been overhauled by us currently, the guide tracks are scraped in tolerance of a new machine, the bearings of the grinding spindle have been changed, accessories: Electric Perm magnetic clamping plate 600 x 350 mm, automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter. The machine is functionally tested and can be viewed at our premises under power, we are also happy to take over the installation and training on site, as well as the service in the future

Splitter Compact 30t Metre log splitter Motor 5.5KW 400V 50HZ Splitting force max. 30t Max. split material diameter 400 mm Torsion-resistant and particularly tilt-resistant construction with log lifter that erects the heavy trunks Swivelling table for particularly fast work Splits hardwood and softwood up to 1100 mm in length effortlessly and reliably G&SC-5905510902

Machine name: 3D Printer Manufacturer: DMG MORI Model: Lasertec 30 SLM Year of construction: 2018 Condition: as good as new (used)

Tripet TST201CNC nr 3520.17.137 BJ.1987

Table 6000 x 3000 x 400 mm Thickness: 400 mm Length: 6000 mm Large: 3000 mm Weight: 22 ton

Key data: 350 mm, 300 mm

Control: Okuma OSP-E100L Travel: X approx. 350 mm. Z: approx. 300 mm, maximum rotary diameter: 400 mm Item No.: 110174 Year of Make: 2004 Equipment: Conveyor Ewag infeed belt -20 positions

1 punching machine (14), manufacturer Kaiser, type KSTU 3500-25-6P, year of manufacture 2000, press force 350 t, stroke rate 20-100/min, stroke height 40 - 250 mm, ram adjustment 200 mm, installation height 700 mm, table size approx. 1,000 x 2,700 mm, control system, manufacturer Siemens, type Simatic Multipanel (retrofitted), force measuring unit, manufacturer Brankamp Marposs, type Prokos X1, two-hand operation, material discharge belt, downstream incline conveyor, coil unwinding reel, manufacturer Dreher, type 2380P, year of manufacture 2000, SN 0051, alignment unit, buffer section, belt feed, manufacturer Dreher, separate switch cabinet system, manufacturer Rittal, cooling unit, accessories: workbench, partition lighting, pull-out cabinet, swivel chair Find more here - / Contact us at -

Specifications: Model: Thermo Electron TPF 340 SV Temperature range: down to -40 °C Mains operation: 230 V, 3.5 A, 50 Hz, 0.8 kW Refrigerant: R404a, 0.7 kg Protection class: IP 20 Equipment: Robust design for professional use Digital temperature control with display Several sturdy stainless steel drawers in the interior for efficient storage Lock to secure the contents Ideal for samples, reagents, sensitive materials or food Condition: Used, in working condition With slight signs of wear (see pictures) Interior clean, stainless steel drawers available

max. format 36 x 36 cm Year of construction 2010 Banding device Computer control with monitor US 2000 Corner Slider CL Banding Station for paper and foil tapes max. stacking height 30 cm Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.

dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.