134,078 used machines on RESALE, but how to find them? Machine Search
- Chip conveyor - SMW 315 3 chuck - 2 x Radial live tooling holders - 2 x Axial live tooling holders - Spindle bore 80 mm - BMT-Tooling system - Tool measuring probe - Spindle hours 6960 / 6270 Running hours
- Chip conveyor - Double doors front side - Chain Tool chnager 30 positions - Central lubrication - IKZ 16 Bar and 2,2 kW Flow 16L/Min - Tool blocking power 1968 daN - Full set books and 1e owner machine
- 4 chuck 1600 mm - Heidenhain digital read out - Steady rest 710 mm - Powered tailstock - Threath cutting - Triple guide ways cast irion bed design - For turbine rotors, electrical motor anchors , reactor vessels, cylinders, rope pullys, marine propulsion shaft, castings, shafts and cement industry
- CNC Dresser KW with Siemens 840D new in 2002 - HeidenHain measuring scales - Siemens Servo engines - Crankshaft and External grinding - Large steady rest package - Large stone and flanch package
- Guideway / Slide way / Surface Grinding Machine - Universal grinding head S10 with 110 Degree tilting / 2500 Rpm / 7.5 kW - Vertical grinding head S30 with Ø 600 x 150 / 930 Rpm / 22 kW - Double SIEMENS 840D Controll panel Left & Right side machine - KNOLL HL650/4000 Filtration system new 2023 - Automatic doors (4x) for easy machine / load / clamping acces - Hydraulic table drive with 18000 Kg Work load - Rebuild in 2012 for 1.5 Mil EUR - Large package flanches and stones - Large package spare parts / ballscrews / measuring / protection covers
- CNC Crowning - Hydraulic tool clamping - EFL Easy form laser measuring & correction system - Set Tooling - Laser guide protection - Controlled axis Y1/Y2/X/R/V-Axis
- CNC Crowning - Hydraulic tool clamping - EFL Easy form laser measuring & correction system - Set Tooling - Laser guide protection - Controlled axis Y1/Y2/X/R/V-Axis
10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, ef ...
3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...
A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...
Vacuum cutter Alpina Swopper Sw V 330 S
ALPINA TIPPER TIE SW 330 CUTTER AS NEW
Key data: 300 mm
Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg
Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.
A checkweigher with integrated metal detector Mettler Toledo is available. 1) Automatic checkweigher Mettler Toledo AdvancedLine CM3571, year of manufacture: 2020, weighing capacity: 1000g-6000g, min. weighing product: 80g, scale interval: 0.5/1g, tolerance: +/-1000g, belt speed: 35m/min, throughput: 60/min, pneumatic pressure: 400-1000kPa, accuracy class: X III (1). 2) Metal detector Mettler Toledo Profile LS Combi, year of manufacture: 2020, opening width: 350mm, opening height: 150mm, operating sequences: 100/300/800. Including infeed and outfeed conveyors, collection container, covers, FreeWeight Nt, software etc. Documentation available. An on-site inspection is possible.
A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible.
Injection moulding machine Krauss Maffei KM 300-1900 C2 BJ 2000
V. Bandsäge, Fabr. Elektra Beckum, Type BAS 315/4 Year of Make: 1994 Projection 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: saw blades, length stop, angle adjustment for mitre cuts
Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling
Tilting Rotary Table Shelf diameter: Ø 300 mm Manual tilt vertically + horizontally Maxi vertically tilt: 90° Base/shelf height horizontal position: 250 mm Height in vertical 90° position: 400 mm Seating Surface: Length 450 mm x Depth 500 mm x Height 250 mm Weight: approx 200 kg
Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible.
gebr. Guillotine shears, Helmut Lotze, type 205.3000x16, built 1992 Working width: 3040mm Max. sheet thickness: 16mm Stand width: 3040mm Throat: 200mm Stroke width: 1000mm Motor power: 45kW Stroke rate: 22/min.
Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 1900 Nominal / outside width in mm: 920, 1500 Belt width in mm: 800 Driven: YES Engine type: SEW Eur ...
MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...
Double bench grinder, Fabr. Cordes & Sluiter, Type DOT-300 -Motor power 0.85 kW -Speed 1400 rpm -max grinding wheels Ø 300 x 40 mm -Operating voltage 380 volts
Key data: 3000 , 702 , 60
Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg
A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.
: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m Unused display machine 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In add ...
An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.
Height=2.1 m, Overall length= 1.35 m, Overall width= 1.8 m, Net weight= 1353 kg,
used
7 assen: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada-bombardement Capacity: 125 ton x 3100 mm Backgauge: CNC Control: Delem DA65R Passage between uprights: 2600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Length: 3245 mm Depth: 1940 mm Height: 2415 mm Weight: 7,7 ton
Height=0.19 m, Overall length= 0.34 m, Overall width= 0.35 m, Net weight= 18 kg,
used
3 assen: Y1 / Y2 / X Capacity: 220 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 3500 mm Depth: 1900 mm Height: 2700 mm Weight: 10,5 ton
Height=0.19 m, Overall length= 0.34 m, Overall width= 0.35 m, Net weight= 18 kg,
Height=1.19 m, Overall length= 1.27 m, Overall width= 2.38 m, Net weight= 600 kg,
Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 257 kg,
Table dimensions ... 2000x500mm Nominal pressing force ... 30t Slab dimensions ... 500x500mm Machine weight ... 3000kg The machine is in good condition, possible to test under power.
Aircooled chiller CARRIER 30RBM 260 0014 PE 261 KW Cooling capacity: 261 kW / 74.21 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum. Compressors: 4 pcs. Danfoss SH295A4ACE (scroll) Type of refrigerant: R410А Number of fans: 4 pcs. Hydraulic module: 1 pcs. water pump Lowara 00PPG000495200A, expansion vessel. Dimensions: 2.41x2.26x2.3 m. Weight: 1651 kg. Working hours: 1804/1756/1835/1723 h. Condition: Good
Key data: 430 mm, 1260 mm
Control MORI SEIKI ... MSX-850 MAPS II Turning diameter ... 430mm Turning length ... 1260mm Inclined bed Axis Y ... +- 60mm Spindle bore ... 105mm powered tools ... 10 Axis X ... 280mm Axis Z ... 1370mm Circumferential diameter over bed ... 995mm Circumferential diameter via support ... 825mm Spindle speed ... 1-3000 rpm Axis C ... 0,001° Motor power of driven tools ... 5.5kW Main engine power ... 25/30kW Max. spindle torque ... 1000/1300Nm Machine weight... 8100kg L x W x H ... 4532x2291x2390mm The machine is in good condition, possible to test under power.
Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.
used
Max workpiece size 1030x800x350 mm Table size 950x630 mm Can be inspected under power
Stock# UG6390 Used stainless steel ribbon mixer by Młynpol (PL) model MP-3000. Mixer has volume 3000 l. Mixing shaft has welded double ribbon, and is driven via gearbox and el motor 22 kW. Central discharge outlet with pneumatically operated slide valve. Mixer is equipped with two hi-intensity agitators/choppers, each working with rotation 920 rpm. Top open, with hinged lid. Mixer mounted on stainless steel supporting frame. Shipping dimensions: L 510 cm x W 134 cm x H 195 cm x weight approx 2700 kg. Last time machine had been working in food industry.
3D Printer Stratasys Fortus 380mc (2017) Ideal equipment for companies dedicated to prototyping, tooling manufacturing, and serial production of functional parts. Operating hours: 689 h (very low usage) Technology: FDM Build volume: 355 × 305 × 305 mm Licenses and compatible materials: Nylon 12, PC-ABS, SR110 soluble support Accessories: Cleaning station for SR110 soluble supports 20 build trays Recently renovated parts: pulleys, belts, fittings, guide tubes Drying station with full maintenance (summer 2025) High precision and reliability in industrial environments. Low cost per part for medium and large production runs.
Injection Molding Nose Demag ergotech 50/370-200 BJ 2000
We have a unit with Bitzer compressors for sale. System wit R744 refrigerant (CO2) The unit capacity is 22kW -35C To and -5C Tc. Control panel with frequency inverter.
maximum number of results exceeded
please refine your search
