3 layer used for sale

Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10

Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120

Skinner Maja -Type: ESB 3450 -Power: 0.75 kW -Dimensions: 1780 x 740 x 1240 mm -Weight: 195 kg -Feeder belt width: 385 mm -Power supply: 400V 50Hz 3N -Made of stainless steel -Quantity in stock: 1 -Condition: used in good condition/overhauled/ready to work

Spray cleaning system with basket rotation Batch dimension: 400600280 You can find more systems on our homepage under Used systems

Manufacturer: Star Model: ECAS-32T Year of Manufacture: 2005 Frequency: 50/60 Hz Power: 8.0 KVA The machine comes with an automatic bar feeder and oil mist filter. Automatic Bar Feeder: Manufacturer: FMB Model: TURBO 3-36/3200/A Year of Manufacture: 2006 Find more here - / Contact us at -

2000/2200 KVA at 50 Hz, 2500/2750 KVA at 60 Hz, Power (KVA): 2500, Working hours: 46, Frequency: 60 Hz, Voltage: 3300 V

Manufacturer: Star Model: ECAS-32T Year of Manufacture: 2007 Voltage: AC 200V (3 Phase) Frequency: 50/60 Hz Power: 8.0 KVA Weight: 5700 Kg The machine comes with an automatic bar feeder and oil mist filter. Automatic Bar Feeder: Manufacturer: FMB Model: TURBO 3-26/3200/A Year of Manufacture: 2008 Find more here - / Contact us at -

pressure: 120 t chamfer lenght: . mm distance between columns: 2550 mm stroke: 200 mm total power requirement: 13,2 kVA Number of working hours: 2500 h total power requirement: kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech  ...

Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible.

control: Heidenhain centre distance: 1400 mm weight of the machine ca.: 3,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 681 KW, 1500 1/min

Jenbacher 316 Including: - Jenbacher Control (Diana Blue) - Gas line - On-site delivery and/or installation possible at an additional cost.

power capacity: 4 kW feed pressure: 10 bar liter capacity: 490 Lieter / min Receiver capacity: 350 l motor speed: 1500 U/min voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m • 2 piston-compressor with tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-300 L , Capacity: 315 Litres , Coo ...

CNC CO2 Laser Cutting Machine Bystronic Bystar 3015 Laser source: ByLaser 4400, Laser power: 4400W (4.4kW), Working area X/Y/Z: 3000mm/1500mm/170mm, Max. workpiece weight: 890kg, Positioning accuracy: +/-1mm, Repeatability: +/-0.05mm, Rapid traverse: 50m/min, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, Max. sheet weight: 160kg/m². Control: ByVision CNC, Video on request

A 2-stage plate heat exchanger W. Schmidt KG is available. Throughput capacity: 12000l/h, product temperature range: 5°C-93°C, max. operating pressure: 6bar, product: wort, machine dimensions X/Y/Z: approx. 1750mm/1750mm/600mm, weight: approx. 1000kg. Including 126 removed plates. On-site inspection is possible.

Haeusler VRM-HY-N - 3000 x 20 mm CNC Number of rolls: 4 Roll capacity cold: 3000 x 20 mm Pre-bending : Yes

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of ram: 274 mm control: Cybelec ModEva Pac total power requirement: kW weight of the machine ca.: 17.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: mm : kg height adjustment: 750 - 1100 mm weight of the machine ca.: 0,80 t dimensions: 2,0 x 0,55 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 kN, 900 g/PS, 60 mm

Injection molding machine Krauss Maffei Km 300 1400 C1 BJ 1998

Brand PC 3001vario vacuum pump 2.0 m³/h, final vacuum 2.0 mbar

Injection moulding machine Krauss Maffei KM 125-390 C2 BJ 2004

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Range of machines Manufacturer: OMSO Machine designation DM 385/6 BOX Year of Make: 2000 Operating hours approx. 31.950 Number of Printing Stations 6 Number of inking units 6 Number of Ground Pressure Stations 2 Number of ground printing inking units 2

Injection moulding machine Arburg 320C 600/250 BJ 2002

Type: Lid Maho DMU35M Year of Make: 2003 Description: Spindle 20-6300rpm 10kW SK40 Feed speed X,Y,Z 5000mm/min Position tolerance (direct measuring system) 0.010mm Travel: X=350mm, Y=240mm, Z=340mm Other: Tool clamping pneumatic Rotary table with swivel axis manual Weight 1600kg Operating hours approx. 4000h Control Siemens NC810D Unfortunately, the tool spindle has a bearing damage and is therefore only able to run to a limited extent.

Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur GearServo Drive, Gear Motor, Servo GearType:1FT6105-8SF71-3EG1Series No. YF P921 8717 03 001Year of Manufacture: 2002Nominal Torque = MO: 54/65 NmNominal Current = Io: 36/45 ADreh Number = n. max.: 4500 rpmSpur Gear ALPHATyp: SP 210-MF2-20 -021-000Shaft Diameter 75 mmStump Shaft Length 105 mmCentering Diameter 180 mmCentering Diameter 35 mmBolt Circle Diameter 250 mm / 4 x 17 mm BoresHousing Dimension L/W/H 725 x 225 x

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavy straightening plateLength 3050 mmWidth 2000 mmThickness 300 mmPanel thickness approx. 55 mm throughoutWeight approx. 4.5 ton.Good condition; used

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

Electric motor, electric motor SIEMENSDrehstrom motor, power motorType 3LE16012BB233GB4Type V1Size 225MMotor speed 1475 rpm. Current consumption 84 AmpereMotor power 45 kWNet connection 400 Volt, 50 Hz.Shaft diameter 60 mmShaft pin length 140 mmKeyway width in the shaft 18 mmFlange diameter 450 mmCentering diameter 350 mmBolt circle 400 mmFlange motor with 8 mounting holes 18 mmLength motor housing without motor shaft 715 mmLength motor housing with

Battery interchangeable rack, transport rack, storage rack for forklift batteryChanging table, battery pallet, battery swapping system, battery swap trolleyManufacturer: WELUX 2.5Type: WS2-RR-2-300Load capacity: 2x 500 kg per compartment = 1000 kgSlide-in dimensions per compartment W x D = 300 x 920 mmSlide-in dimensions without centre bar W x D = 655 x 920 mmAdjustment height: 80 to 200 mm - centre bar can be dismantled - also suitable for sheet material - 16 pieces of galvanised steel castors 50 mm - 4 pieces of fixed castors 100 mm, 2 pieces rotatable with fixed castors

Hard rock slab, granite slab, granite blockHard stone block, angle block precisely machined on all sidesMeasuring cube, measuring plateLength: 1590 mmWidth: 300 mmHeight: 470 mm- 2 holes 80 mm- 2 holes 120 mm- Threaded bushings mainly M16, some with M12 and M18Weight: 570 kgGood condition; used

Magnetic Drilling Machine, Magnetic Drilling MachineCore Hole Drilling Machine, Metal Core Hole Drilling MachineDR. BENDER Type EK 323Masch No. 180543 year of construction approx. 1988Drilling capacity 23 mmSpindle holder MK 2Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mmDrilling unit 220 Volt, 50 Hz, 1025 WattE-Magnet 220 Volt, 50 Hz, 65 Watt- Spindle speed via 3 gear stages- Left and right rotation- E-magnet KOCH, type KL32/6- Drill head height adjustment guided in a linear guide- Manual expulsor- Drill stand on

MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;

Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

DC main spindle drive, power converter device with digital control Simoreg V55Spindle module, drive controller, rectifier, DC regulatorManufacturer SIEMENSTyp SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0Version V55 Basic unitInput voltage 3 AC 380 V Input frequency 50 / 60 HzInput current 49 AAoutput voltage 380 VDCAoutput current 60 ANenn power 22 kWAbdimension (W x H x D) 270 x 260 x 290 mmWeight approx. 25 kgThe drive controller is still Ready for operation in a guild master

Conveyor belt, trough conveyor belt, trough conveyor GASUS type DG 300-5/2,75Belt conveyor, conveyor belt, belt conveyorFabrig Nr: D-7321915 Year of construction 1996Effective length: 2.75 metersBelt width: 230/300 mmDeflection pulley diameter: 210 / 230 mm (rubberized drive roller)Deflection pulley width: 400 mmBelt speed: approx. 15 meters/min. Motor power: 0.75 kWNerg connection: 400 volts, 50 Hz - Drive via SEW geared motor- Inlet hopper 550 x 430 mm- Metal idler rollers with maintenance-free ball bearings- Strip tension via threaded spindles