126,720 used machines on RESALE, but how to find them? Machine Search
Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Deliver ...
Wire electrode, welding wire, welding wire -Manufacturer: Avesta, welding wire 316L-Si/SKR-Si -Thickness: Ø 1.2 mm -Dimensions: Ø 300/100 mm -Roll weight: 15.9 kg
wire electrode, welding wire, welding wire -Manufacturer: MTC, welding wire G 19 9 Nb Si 1.4551i -Type: MT-347 O1.2mm -Dimension: O 300/110 mm -Weight reel: 15.7 kg
Wire electrode, welding wire, welding wire -Manufacturer: Tetra, welding wire V 309 LG -Thickness: Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight of roller: 12 kg
Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.
Dematic Conveyor Roller Conveyor 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Siemens Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) roller width (RB): 540 mm roller pitch: 62,5-125 mm variable drive types: none or head and center drive weight of conveyed material: up to 30 kg The following accessories are optionally available e.g.: Motors with and without frequency inverter of the brand SEW Eurodrive / Movimot. supports side guides Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope of delivery: without supports and side guides F ...
TIG welding rod, welding wire -Manufacturer: Avesta -Type: 307 Si Ø 1.6 x 1000 mm -Mat.nr.: 1.4370 W 18 8 Mn -Package dimensions: Ø 42 x 1010 mm -Weight: 5.2 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 390 mm -Length: 1185 mm -Height: 42 mm -Groove width: 18 mm -Holes: see photos -Weight: 145 kg
Wittig Compressor ROL 65 Pressure generator from 2000, complete (closed module) 1 available 357 m3/h, 8 bar. Manufacturer: Wittig GmbH Model: ROL 65 Type: piston compressor Serial Number: 920171/17 Flow rate [m3/h]: 357 Pressure outlet [bar]: 8 Power [kW]: 37 Year of construction: 2000 Running hours [h]: – Weight [kg]: 1.071 Dimensions LxWxH [cm]: 111x90x180
Data sheet of retrofit POS. GE 14.45 Gebhardt roller conveyor (without drive), FB = 550 mm, 3000 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 3000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telef ...
Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 380 mm -Inner diameter: 103 mm -Mount: Cone Ø 135 mm -Bolt circle: Ø 170 mm/M16 -Bolt circle: Ø 335 mm/M24 -Dimensions: Ø 380 x 105 mm -Weight: 37 kg
Key data: 3100 mm, 6 mm
Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg
TS 3115 - gravity roller curve Year 2018 new, unused without posts Width width: 400 mm Angle: 90° Inner radius: 800 mm Blue plastic rolls 19, 10 x 8 rolls + 9 x 9 rolls,. Rolls axle distance: 50 mm Division inside: 65 mm Division outside: 110 mm option 2 supports: OK rolls + 700 mm, height-adjustable available: 2 identical rolls curves. Features: Construction year: 2018 condition: new Nominal / inner radius in mm: 800 Roll width in mm: 400 angle: 90° Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intra ...
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg
Solenoid valve, directional valve, valve terminal, pump preload valve -Manufacturer: Rexroth, pump preload valve for the SYDFE control system -Type: SYDZ 001-13/300V028M -Dimensions: Ø 75 x 120 mm -Weight: 2.9 kg
CNC lathe LB 3000 EX II Manafacture: Okuma Corporation Year of manufacture: 2017 Control OKUMA ... OSP-P300LA Turning diameter ... 580mm Turning length ... 950mm inclined bed Axis Y ... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 0-5000 rpm. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under power.
Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 320 mm -Take: Camlock short taper 6 -Hole circle: Ø 133 mm -Through hole: Ø 95 mm -Weight: 40 kg
Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame wi ...
Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, V-flange -Welding flange: DIN 2633 - ND16 -Type: ND16 NW300/323 9-C22 8-23130/V -Interior diameter: 310 mm -Hole circle Ø: 410/26 mm -Dimensions: Ø 460/H77 mm -Weight: 21 kg
Lippert belt conveyor inclined belt GF 3100-650-500 RA1494 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3100 mm (upper straight 470mm + inclined belt 2630mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive dru ...
turning diameter: 330 mm turning length: 140x130 mm control: turning diameter over slide: 140 mm travel -x axis: 107 mm travel -z axis: 230 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turbomixer: 300 liters, brand: Caccia, stainless steel, engine: 380 V 2 speeds; 1st gear: 63 hp at 1800 rpm and 2nd gear: 75 hp at 2960 rpm.
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller -MOD: 1/11919-002 -Art.: 234500-14530 - Quantity: 1 piece -Dimensions: 390/105/H325 mm -Weight: 8.2kg
Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 320 mm -Outer: Ø 359 mm -Width: 175 mm -Weight: 19 kg
Recon Standard dimension Polished Part Number: 7W0212 Iincl. 2 gears Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Wire electrode, welding wire, welding wire -Material: stainless steel -Shielded gas wire electrode: started roll -Type: 318 Ø 1.00 mm -Dimensions: Ø 300 / 105 mm -Weight roll: 13.8 kg
Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Bohler, started role inert gas wire electrode -Type: AVESTA Cored Wire FCW-2D 316L/SKR O 1.2 mm -Dimension: O 300 /100 mm -Weight reel: 11.9 kg
Wire electrode, welding wire, welding wire -Manufacturer: Metallit, shielding gas wire electrode -Type: 308LSI Ø 0.8 mm -Price: per piece -Quantity: 2 pieces -Dimensions: Ø 300/100 mm -Weight per roll: 15 kg/piece
Recon Part Number: 2128176 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 325 mm -Piston diameter: 32 mm -Piston rod: Ø 18 mm/M16x1.5 -Recording: dimensions see pictures -Price: per piece -Number: 2 piece -Dimensions: 530/110/H65 mm -Weight: 3,9 kg/piece
moving point, moving center point, moving center point, moving lathe point, pressing tool toggle press -Component: from a rotating center point -Use: e.g. as a pressing tool -Dimensions: see photo techn. drawing -Dimensions: Ø 66 x 320 mm -Weight: 3.3 kg
Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: Type 3RV1021-4CA15 -Dimensions: 100/50/H100 mm -Weight: 0.4 kg
Recon Part Number: 2659105 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg
Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, -Manufacturer: WMW HECKERT, clamping device from milling machine FSS 315-V -Type: FHKN 3311 -Motor: VEM 0.12 kW -Dimensions: 440/150 / H220 mm -Weight: 24 kg
Recon 1278256+1278259 Diesel Left & Right Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Power: 4x5/3/1.29/0.86 kW -Resistance: 4x 33/28/66/100 Ohm -Dimensions: 595/480/H955 mm -Weight: 58 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 3 pieces -Dimensions: 250/65/H65 mm -Weight: 1.85 kg/piece
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimensions: 345/65/H65 mm -Weight: 2.05 kg/piece
Recon Part Number: 1069872 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 13 mm -Inside diameter: 100 mm -Price: per piece -Number: 4 pieces -Weight: 1.9 kg
Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 10 mm -Inside diameter: 100 mm -Price: per piece -Number: 2 pieces -Weight: 1.4 kg
Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 300 mm -Width: 40 mm -Interior diameter: 51 mm -Weight: 6.2 kg
Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Rolls: Ø 89 x 330 mm -Roll width: 330 mm -Dimensions: 435/580/H720 mm -Weight: 20.5 kg
Three-roller calender brand MG 3000 x 200 mm. Year 2006
Key data: 3000 mm, 1500 mm, 6000 W
3000 x 1500mm Dynamic Edition
8 stations gatherer 3692 (4 double stations) Hand feed station ASAC (Automatic Signature Thickness Measuring System) Criss-Cross delivery 1588 Book length : 140 - 460 mm Book width : 100 – 320 mm Signature thickness : 6 mm Speed : 6000 t/h
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 60 mm -Piston rod: Ø 35 mm -Flange: Ø 69 mm -Recording thread: Ø 22 x 2 x 30 mm -Stroke: 900 mm -Dimensions: 1090 x 100 x 100 mm -Weight: 17 kg
maximum number of results exceeded
please refine your search
