3 layer used for sale

Key data: 350 , 41 , 25

Manufacturer: Arburg Type: 221KS 350 - 100 Year of construction: 2001 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.5 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1150 kg Optional extras Robot interface

Sanyo MPR-311D(H) Medication Refrigerator 340l Safe, worry-free, cool storage of valuable medical products Efficient temperature control A thermistor sensor and electronic temperature control ensure that that the setpoint temperature is maintained. Even if the door is opened and closed every now and then, the fans ensure rapid temperature compensation, to ensure highly reliable and stable storage conditions, on which the outside temperature has no influence. Equipped with digital temperature display A clear digital temperature display allows for quick visual inspection to the current operating temperature. To simplify visual temperature control, the temperature is measured in 1°C increments for a temperature range of 0°C to +15°C. Fan forced circulating air Thanks to the fan-forced recirculation system, the temperature is evenly distributed throughout the chamb ...

Key data: 350 , 41 , 25

Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 2001 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.5 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1150 kg

; Mileage [km]: 6; Power [PS]: 95

volt: 150 V ampere: 19 A weight: 20 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 , 41 , 25

Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 09/2005 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.6 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1200 kg Optional extras Core train x1 Hot channel integrated

RUBBER BELT TROUGHED BELT BLASTING MACHINE WITH FILTER RUBBER BELT SHOT BLASTING MACHINE WITH FILTER Description: Rubber troughed belt blasting machine Manufacturer: Wheelabrator Year of Make: 2004 Type: MB 300G Band Type: Elastic Band Charge max. kg: 800kg Blasting wheels: 18.5kW Dump belt width: 1,200mm Max. filling volume: 300 litres Composed of: - Rubber troughed belt blasting machine type: MB 300G -Switchboard - Filter system - Discharge channel - Feeder Designation: Rubber Belt Shot Blaster Brand : Wheelabrator Type: MB 300G Belt Type: Rubber Belt Charge max. kg: 800kg Shot Wheel: 1 Pieces with 18,5kw Belt width: 1.200mm Fill weigth: 300 liters Consisting of: - Rubber Belt Shot Blaster Type: MB 300G - Main Panel -Filter - Outlet Vibro - Hydraulic Loader Price: Loading onto truck Price: Loading on Truck Warranty: 6 months functional and warr ...

Manufacturer: Arburg Type: 320 C 500 - 170 Year of construction: 11/2006 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Lifting volume: 115 ccm / 105 gram PS Injection pressure: 1470 bar general Engine: 11 kW Heating: 9.4 kW Dimensions: 3.4 m x 1.4 m x 1.9 m Weight: 2430 kg Screen text: German Additional equipment Core train x1

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,494 mm high 400 mm deep 02x Shelf, used Designation: ZB 4423 V Material colour: sendzimir galvanised Dimensions: 994 x 400 x 30 mm Weight | Pcs.: approx. 4.65 kg Max. load per shelf 200 kg at the same weight. Distributed load 01x Plinth panel, used for floor length: 994 mm Material colour: sendzimir galvanised Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Pcs.: approx. 0.51 kg 05x Shelf crossbar, second choice (new) Material colour: sendzimi ...

Key data: 700 , 121 , 35

Manufacturer: Arburg Type: 320 KS 700 - 250 Year of construction: 2001 Control: Selogica Locking type: Knee lever Closing force: 700 kN Tie bar spacing: 320 mm x 320 mm Plate size: 476 mm x 476 mm Tool height: min 200 mm max 400 mm Opening distance: 250 mm Plate spacing max.: 650 mm Screw: 35 mm Stroke volume: 144 ccm / 121 gram PS Injection pressure: 1820 bar general Engine: 15 kW Heating: 6.1 kW Dimensions: 3.3 m 1.45 m x 1.6 m Weight: 2190 kg Screen text: German Optional extras Robot interface funnel

Gallus EMS 340, 2009(8) Transaction Splice detection with acoustic warning signal Web edge control Web Tear Control 2x Corona enema, behind movement 4 (Vetaphone/Softal) 1x web cleaning Arcotec 8 printing platforms 8 flexographic printing units 3x screen printing units interchangeable 2x rotary punching machines Scoring tool with cross-cutter Rail 1x additional on/unwind (laminate) 1 x additional cold foil stamping Insertion offset station for the production of multi-layer labels ( web offset device ) 8x GEW UV drying with cooling roller Hyfra Cooling Machine BST Video Control Automatic register control Sensotec Job data management for up to 500 jobs Format Length Correction in the Printing and Processing Area - Recommended for Stretchable Materials Mesh winder Takeup Stretching roller and pressure arm for wrinkle-free winding of thin films and aluminium. 1x tran ...

Key data: 800 , 172 , 40

Manufacturer: Arburg Type: 370 C 800 - 350 Year of construction: 2001 Control: Selogica Closing type: Hydraulish Closing force: 800 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min.250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 40 mm Lifting volume: 188 ccm / 172 gram PS Injection pressure: 2120 bar general Engine: 18.5 kW Heating: 10,2 kW Dimensions: 4.3 m 1.7 m 1.8 m Weight: 3430 kg Screen text: German Optional extras Core train: x1 Robot interface

Key data: 2 mm, 10 mm

Description KRAMATORSK CNC heavy lathe 1 K 671 320 F3 Details Type 1 K 671 320 F3 Year of construction 1988 (first commissioned in 1998) Turning length 10,000 mm Turning diameter over bed 2,000 mm (modified) Face plate diameter 1,950 mm Face plate clamping range 400 - 1,350 mm Speeds 1.00 - 140 rpm. Torque 125,000 Nm Main cutting force 130 kN max. Tailstock can be automatically swivelled in max. workpiece weight 70 to max. workpiece weight with steady rest 100 to Drive power 100 kW Number of bed tracks 4 Dimensions 22,000 x 6,200 x 2,900 mm CNC control SIEMENS 840D (2010 for 220,000.00 €) Support feed X-Z 0.3 - 4,000 mm/min. Support rapid traverse X-Z 4,000 mm/min. Dimensions inner cone 140 x 1:7 The machine is up to date with the CE directives incl. 2 steady rests, 1 roller block, 4 jaws, boring device very good c ...

Manufacturer: Arburg Type: 420 S 800 - 350 Year of construction: 1999 Control: Selogica Closing type: Hydraulish Closing force: 800 kN Tie bar spacing: 420 mm x 420 mm Plate size: 638 mm x 638 mm Tool height: min.250 mm Opening distance: 450 mm Plate spacing max.: 600 mm Screw: 45 mm Lifting volume: 230 ccm / 194 gram PS Injection pressure: 1600 bar general Engine: 18.5 kW Heating: 10,2 kW Dimensions: 4.3 m 1.7 m 1.8 m Weight: 3800 kg Screen text: German Optional extras Core train: x1

Specifications: 2 castors hydraulically adjustable 3 rollers driven Resistance torque: 80 cm³ Shaft diameter: 100 mm Roll diameter: 315 mm lateral hydr. Controlled arm correctors left and right CE. Mark Bending capacity square: 120 x 60 x 5 mm Bending capacity flat steel: 130 x 25 mm Bending capacity tube: 114.3 x 6 mm Bending power angle: 100 x 10 mm Round steel: 80 mm Motor power: 11 kW Control panel with digital display Dimensions (length x width x height): approx. 1750 x 1850 x 1650 mm Weight: approx. 3.6 tons Accessories: Various bending rollers Condition: we will still carry out a complete service on the machine The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Key data: 800 , 153 , 35

Manufacturer: Battenfeld Type: HM 80/350 S Year of construction: 2005 Control: Unilog B4 Closing force: 800 kN Closing type: Hydraulish Tie bar spacing: 370 mm x 420 mm Plate size: 544 mm x 544 mm Tool height: min 225 mm Opening distance: 475 mm Plate spacing max.: 700 mm Screw: 35 mm Lifting volume: 169 ccm Injection weight PS: 153.8 gram HP Injection pressure: 2083 bar general Engine: 15 kW Heating: 10,4 kW Dimensions: 3.7 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

Code 0736 Description hydraulic surface grinding machine Make ORION ( HAHN & KOLB ) Model 308 Serial No. 5128 Year 1978 Tablesize 1520 x 300 mm Table grinding size L x B x H 800 x 350 x 500 mm Magnetical plate size L x B 800 x 300 mm Speed table movement 2 - 30 m/min. Rapide vertical movement 0,4 m/min Max. distance table – centre grinding wheel 640 mm Max Grindingstone diameter x Wide x Taper 300 x 50 x Ø 76 mm Spindel power 5,5 and 7,5 kW Spindel speed 1440 and 2880 rpm Weight 3500 kgs Motor power 5,5 / 7,5 kW – 380 Volt Accessoiries Elec. Magneticplate 800 x 300 mm Coolant Condition Machine is in good condition

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 3000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component D1. Machine concept The TruPrint 3000 is a universal medium format press with external parts and powder management for industrial production Complex metallic components by means of 3D printing. Through your large construction volume, it offers a high degree of flexibility in terms of Size, number and geometry of each application. Bcu70Qrgxc Specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals i ...

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Hammer mill Mikropul Cologne Type 3SCB Serial number: 610098002 Year of construction: 1979 Electric motor 30 to 75 Kw can be used Height: 1200 mm Width: 1200 mm Depth: 1000 mm Inlet: 170 mm x 170 mm Outlet diameter: approx. 500 mm Roller: 400 mm x 350 mm Changes and errors in the technical data, data and prices as well as intermediate sale reserved.

: 330 mm : 5000 mm : 450 mm : 330 mm : 450x330 mm dimensions of saw-band: 5000x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert MKS-315 MEAL Cutting of profiles, pipes, solid materials made of black and waistband metal. saw blade diameter, 315mm bore 32mm Blade speeds 53-105 rpm Quick-release vice 140mm opening Engine power 2.2 KW Reel pad Coolant device +-45° swivel Weight 220kg WJ-MKS-315 MEAL options: underframe Circular saw blade D = 55mm 45° 50 mm material full D = 180mm 45° 80 mm pipe Square 85x85 45° 70x70mm Flat 140x70 45° 80x70mm

: 325 mm : 4380 mm : 400 mm : 325 mm : 400x325 mm dimensions of saw-band: 4380x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel

20197 ZF IRM 350P Ratio: 4.536:1 Power Factor 0.207 kW/rpm Brand New Features: SAE1 SAE Housing Controls Oil FIlter /Oil Cooler Weight (kg) Dimensions (cm) 230 60 x 800 x 110 Amsterdam Alexandria Marine Boekweitstraat 17 2153 GK, Nieuw Vennep The Netherlands +31(0)252514588

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-

Filter system for low-viscosity liquids Manufacturer: Mahle Type: AF11363-1321-21000-3864/G1 All information without guarantee

Absorption dryers

; Gross weight [kg]: 5370; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 534

Siemens Sinumerik 3G, 6FC 3741-OMA-Z Not checked for functionality. Sold only to traders! All information without guarantee

Homogenizer GAULIN MC 25 - 3TPS, SN.95L34613 Flow Rate: 10,000 l/h, maximum pressure: 170 bar, poppet valves 2-stage with MICRO-GAP valve for dairy products Main motor: 75 kW incl. control cabinet with automatic control Device will be completely overhauled, engine is newly stored,

PART NUMBER: 7547 Specifications: - Track width 300mm - working width of the shaft 290mm - max disc diameter 300mm - blade bore diameter 70mm - max cutting height 100mm - width of the table top with extension 680mm - table top length 1630mm -in advance: - 2 rows of ratchets - Slip roller, metal, pressure roller - shaft with saws - 2 smooth metal sliding rollers, pressure roller - from below: - guide strip -Triggers -caterpillar - electric body adjustment up/down - central lubrication of the track - 2 types of feed speeds - feed motor 1.1kW - main motor 22kW - extraction spigot diameter 130mm - total dimensions length/width/height 2000x1400x1700mm - weight about 900kg ADVANTAGES – Italian production – very good condition – used multi-rip saw Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change w ...

Brand: Caterpillar Model: 3508 DITA Power: 746 KW RPM: 1600RPM Flywheel Housing SAE 0 Engine Condition: Used Turbo Type: Dry Exhaust Systeem: Water-cooled ECU Starter Voltage: No Starter Present , Injection Type: ECU (Electronic Control Unit) weight: 5500 kg

max. workpiece length: 5150 mm profile spindle: 1 Stück main drive: 16 kW Control: Beckhoff CNC Number of axles: 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm, Y = 1500 mm, Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid ...

PART NUMBER: 7532 Specifications: - Track width 340mm - shaft width 400mm - shaft diameter 65mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height (with 400mm blade) 140mm - table top width with clearance 870mm - table top length 2140mm -in advance: -Triggers - 1 roller, pressure slip -Triggers - slip roller, pressure roller - shaft with saws - slip roller, pressure roller - slip shaft, pressure shaft - from below: - guide strip - slip roller -Triggers -caterpillar - electric body lifting 0.55kW - electric shaft lifting with saws about 0.55kW - central lubrication - smooth feed speed control on the inverter (1.5kW) 8-48m/min - main motor 55kW - extraction spigot diameter 300mm - total dimensions length/width/height 2540x1480x2570mm - weight about 3500kg Advantages: – made in Germany – 5pcs of blades fi350mm in ...

Brand: Caterpillar Model: 3512 B DITA Power:1015KW RPM: 1600RPM Cooling Type: Heat Exchanger Flywheel Housing SAE: SAE 00 Engine Condition: Used Turbo Type: Dry , Exhaust Systeem: Water-cooled , ECU Starter Voltage: No Starter Present , Injection Type: ECU (Electronic Control Unit) , weight: 6250

ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...

specifications: - Welding current 315 A 80% ED - 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg

Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland

Discover an exceptional opportunity to acquire a new and unused Siemens Steam Turbine, perfectly suited for high-efficiency power generation: - Voltage: 11kV - Frequency: 50Hz - Speed: 1500rpm - Blower: Howden SO2, powered by a Siemens motor with a robust 2200kW capacity. - Condenser: High-efficiency Shell and Tube type for superior heat exchange. - Condensate Extraction: Sigma pump ensuring effective condensate management. - Vacuum Pump: Invatech water ring vacuum pump for optimal system performance. - Steam Generator: Clayton E-1204-SH, known for its reliability and efficiency in steam production. - Deaerator and Blowdown Tanks: Depression models to safeguard system integrity. - Boiler Feed Pumps: Hammelmann, designed for consistent and reliable water supply to the boiler. - Boiler Booster Pumps: Flowserve, enhancing the system's pressure cap ...

High-performance fine cone crusher Calibrator 1600/300 H III

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm turning dia. in gap: 420 mm spindle turning speed range: 70 - 2000 U/min spindle bore: 38 mm number of feeds: 18 Stk feed range: 0,052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm voltage: 230 / 50 V Hz total power requirement: 1,1 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 0,8 x 1,4 m • incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0600 mm : 300 mm : 342 mm : 700x340 mm : 355x38x127 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm : 1500 mm : : 230 mm : 78 mm : 400 mm : 2200 U/min : D1-8 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 125 mm stroke: 350 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.