3 kw fan used for sale

turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), driven tools 4000 rpm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IN: 3x380-500V 50/60Hz 3.7/3.1A OUT: 3x0-Vin 0-1000 Hz 4.1/3.4A 1.5 kW (400V) / 2.0HP (460V)

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, screw stand -Support stand: Steel stand, height adjustable -Design: solid steel construction -Dimensions: 355/280H500 mm -Weight: 19 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Clipping machine Manufacturer: Poly Clip Model: FCA 3462 Production capacity: 90 cycles/min Voltage: 400V (3+N, 50Hz) Electric power: 3kW Compressed air: 0.5 – 0.7 MPa Maximum closing diameter: 120 mm Dimensions: 1580x1440x2050mm Weight: 595 kg

Key data: 8000 mm, 3000 mm

Large plate field with T-slots Clamping area 8,000 x 3,000 mm Thickness 350 mm. With 12 x T-slots. Total weight approx. 20 t

Control, control unit, interface, drive control, drive current control, circuit board -Manufacturer: Linde, control unit from electric hand pallet truck -Type: 3603605020 -Mat no.: 5210175 -Number: 1x control unit available -Price per piece -Dimensions: 130/100/H45 mm -Weight: 0.1 kg/pc.

Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg

AquaSnap chiller with heat pump. Heating 89kW - Cooling 74kW with 2 Danfoss compressors Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Labeller for two-sided labelling of rectangular, conical, oval and semicircular products • 2 lateral label dispensers Bluhm Weber Alpha Compact Plus RH+LH in the wipe-on procedure, can also be used individually • Label dispenser height/cross/length adjustable and inclinable • Label format min. 10 x 10 mm, max. 200 x 200 mm • Label roll diam. 300 mm, core diam. 76 mm • One-sided inkjet printing unit for labels Bluhm Weber Markoprint X1 Jet with cartridge • Press-on device • Output max. 80 labels/min • Basic conveyor belt width 80 mm • Interchangeable separator at the infeed • PLC Siemens S7-1200 CPU 1214C • HMI Siemens Simatic • Drive 400V/50Hz • Chain alignment for centred positioning of the products • Head band for product stabilisation • Product delivery on Bluhm Weber turntable, diam. 1,000 mm, white plastic plate, speed adjustable, ...

Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation grille: louvered grille, Filter for oil mist separator -Material: aluminum -Total dimensions: 440/330/H345 mm -Weight: 13.8kg

MAZAK SUPER QUICK TURN 30MS CNC SUB SPINDLE, 'C' AXIS, DRIVEN TOOLING LATHE WITH MAZATROL T PLUS CONTROL MACHINE IS COMING FROM AEROSPACE COMPANY AND IT IS IN A VERY GOOD WORKING CONDITION Kitagawa B-212 3 Jaw Power Chuck. Maximum Swing Ø560mm. Maximum Swing Over Cross Slide Ø500mm. Maximum Turning Ø413mm. Distance Between Spindles 1,035mm. Main Spindle Bore Ø88mm, Sub Ø61mm. Axis Travel 'X'=244mm, 'Z'=1,035mm, 'B'=1,067mm. Maximum Main & Sub Spindle Speeds 3,000rpm. Maximum Milling Spindle Speed 1,500rpm. 12 Station Turret. (1997)

Key data: 4600 KW, 5500 kVA, 11200 V

Engine details: Make: Caterpillar Model: 3616 Mfg Year: 2009 Type: V-16, 4 cycle Serial no: 1PD00596 Ar no: 1593616 Power: 4600 KW RPM: 900 Rotation: CCW Weight: 28,500 kg Alternator details: Make: Kato Type: 8P12-4700 Model no: AA28295000 Power: 5500 KVA Voltage: 6466/11200 Phase: 3 Frequency: 60 Hz Quantity: 8 sets Weight: 25,946 kgs Contact us at infoheeyas.co.uk #caterpillar #engine #generator #new #power #energy #new #genset #diesel #electricity

hydraulic motor, oil motor, hydraulic pump, hydraulic valve -Manufacturer: Danfoss, hydraulic motor with: valve block -Manufacturer hydraulic motor Danfoss type: OMP 315 151-0033 7 -Valve block: Hawe SK.7356-160/160 -Shaft: Ø 25 x 40 mm -Dimensions: 240/130/H200 mm -Weight: 9.8 kg

Translyft Rotary table scissor lift Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph

Transnorm belt conveyor GF 3990-700-600 RA2069 Technical data: Conveyor length (NL): 3990 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3990 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: ...

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 320-390mm -Number: 24x Fixators available -Price: piece -Dimensions: Ø 360/H370 mm -Weight: 41kg/pcs

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg

Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 210 Width: 375 Height: 255 Electric power: 14 kW

Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm -Dimensions: 325/247/H115 mm -Weight: 13.7 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Steel, lever shears, sheet metal shears with stable base -Cutting length: approx. 325 mm -Overall dimensions: 840/560/H2075 mm -Total weight: approx. 131 kg

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Grip width: 80 to 300 mm -Load capacity: 1.5 tons -Number: 2x grippers available -Price: per piece -Dimensions: 700/220/H500 mm -Weight: 25 kg/pc.

Sind cutter 330 liters with vacuum Type: SVC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 105 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: from automatic band saw -Piston rod: Ø 30 mm -Stroke: 380mm -Piston rod mount: M16 -Dimensions: 605/105/H95 mm -Weight: 12.4 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 322 mm -Transport width: 750 mm -Shaft: Mounting Ø40 x 95 mm -Quantity: 1x transport roller available -Total dimensions: Ø 322 x 940 mm -Weight: 62 kg/piece

Type: SV 300 l 2P-V Completely stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 124 Length: 143 Height: 147

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: PSG, heating tape, heating sleeve -Type: 50Ø38 C -Heating power: 350 W -Voltage: 230 V -Dimensions: 200/130/H40 mm -Weight: 0.2 kg

Tandem cargo bike, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy-duty wheel: Double solid rubber tire -Tire type: 415/75-305 -Receipt: Ø 90 x 58 mm -Bolt circle: Ø 220 mm -Dimensions: Ø 415 x 215 mm Quantity: 1 piece available -Weight: 49 kg

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm -Weight: 126 kg

BLM ADIGE fiber laser Year 2010 3000x1500 3000W loading/unloading Lantek License Hours about 20 thousand sheet thickness 20 mm. Iron and 8/12 Stainless Steel

Yale 35VX Load capacity : 3370 kg - Year of manufacture : 2012 - The machine has 6098 operating hours and good condition - Total weight : 4.930 kg For more information, please refer to the license plate in the pictures. Net price.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 605 mm -Shaft: Mountings Ø40 x 110 mm -Quantity: 1x transport roller available -Dimensions: Ø 320 x 795 mm -Weight: 68 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm -Own weight: 36 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Rix, RIX-HSS saw blade with SK40 mount -Size: 350xx3x32mm -Number of teeth: 96 teeth -Dimension: Ø 350 x 175 mm -Weight: 4.2 kg

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

Alfa Laval Mapx 309 2 pieces available. Price 1 pcs Motor 11 kW Hydraulic capacity 9.800l /h Tools Used

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter, -Manufacturer: RSF, Converter -Type: ZEV 5 Ord.-No. 14 369 519 -Number: 3x converter available -Price per piece -Dimension: 230/60/H35 mm -Weight: 0.3 kg/pc.

Fan filter, fan line, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3322100 -Fan: 230V 19W -Number: 2x fans available -Price per piece -Dimensions: 120/120/H40 mm -Weight: 0.6 kg/pc.

For sale, we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Main features of the machine (overall): • Possibility of combining punching and laser burning • Automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and replacement of pallets during the operation of the machine • automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of loading sheet metal during machine operation • Automatic bale boom 1500x400mm (two conveyor belts for details) • Turning station with 41 fixed and 4 rotating stations • 3 manually adjustable paws • Cutting elements on length 3020x1500 • Laser cut length 2000x1500 • Max. sheet thickness 6mm (due to brush table) • Thread function • Pneumatic low bracket Accessories for th ...

PLC control, digital output, digital output -Manufacturer: Siemens, Simatic S7 digital output -Type: 6ES7 322-1BL00-0AA0 S C-X3V78356 E-Stand:7 -Number: 1x module available -Price per piece -Dimensions: 130/55/H125 mm -Weight: 0.4 kg/pc

Type: SC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 243 Depth: 230 Height: 182 Electric power: 80 kW Voltage: 400 V, 50 Hz

PLC expansion module, switchgear, control system, marshalling module, circuit board module -Manufacturer: Phoenix Contact, PHG patch panel -Type: UMK-SE 11.25-1 ID number: 3522449 -Number: 2 modules available -Price: per piece -Dimensions: 115/75/H40 mm -Weight: 0.1 kg/pc.

FSA Combined MIG/MMA Welding Machine MIG Shielded Gas Welding 30 - 315 A MMA Electrode Welding 10 - 200 A MIG burner hose 2 m Mass clamp 3 m Reducer Electrode holder Weight approx. 40 kg

2000mm 66 ton Y1 Y2 R1 Z1 Z2 X1 X2 Excellent condition With tooling

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 370 mm -Roller diameter: 80mm -Roller spacing: 100mm -Dimensions: 2000/510/H290 mm -Weight: 93 kg

Crane block, deflection pulley, cable pulley, steel cable pulley, cable deflection pulley, crane, block and tackle -Crane block: with guide rails -Rollers: Ø 350 mm / 4 grooves -Number: 8x pulley available -Price/delivery: per piece -Transport dimensions: 650/330/H350 mm -Weight: 50 kg/pc.

Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Mass of tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating Lmmuapd8S 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Outer dimensions inc ...

Key data: 408 KW

2 x Caterpillar 3508 Natural Gas Generating Sets 1 of the generating sets has had a top end service. Make and model: Caterpillar 3508 Capacity: 408kW Hours: 46,600 Year: 1994 Fuel: Natural Gas Hz: 50 V: 400 Scope of supply: Engine, Alternator, Control Panel (ComAp), Radiator. Price: €50,000 each Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.

T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg