3 kw fan used for sale

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B400 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 360/175/280 mm -Weight: 30 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B100 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 320/175/280 mm -Weight: 23 kg

FANUC M-710iC/12L robotic welding station was built in 2014 in Japan by Fanuc Corporation. All components of the welding station are brand new. It has never been in operation after purchase. The FANUC M-710iC/12L is a state-of-the-art welding system designed for automated arc welding of structural components with even the most complex geometries. The machining process is performed by a FANUC 6-axis robot, distinguished by, among others, its clever design and robust arm with a large range of movement. The arm’s reach of 3323 mm and a payload of 12 kg enable the welding of complex workpieces, while maintaining a highly dynamic and repeatable process. Directly on the machine body, a reliable LINCOLN ELECTRIC wire feeder is placed, which ensures dynamic and accurate feeding of the welding wire. The welding torch, in turn, is automatically cleaned at predetermined intervals by the ABICOR ...

Model: M-10iA/6L Serial Number: R11Y01899 Year of manufacture: 2011 Load capacity: 6 kg Reach: 1630 mm Number of axles: 6 Weight: 135 kg

This 5-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X, Y, and Z travels of 700 mm, 400 mm, and 330 mm respectively, along with a spindle speed of 24,000 rpm. The machine offers a maximum feed rate of 54,000 mm/min and can accommodate a workpiece diameter of up to 300 mm on a 5-axis table. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for more information about this machine.

This 4-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine is capable of a spindle speed of 24,000 rpm and a maximum feed rate of 54,000 mm/min. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for further details.

This 6-axis FANUC M-20iA robot arm was manufactured in 2015. It features a maximum payload of 20 kg and an impressive reach of 1,811 mm. The robot can be mounted in various configurations, including floor, ceiling (inverted), and angle mounting. If you are looking to get high-quality automation capabilities, consider the FANUC M-20iA robot arm we have for sale. Contact us for further details.

This 3-axis FANUC Robodrill D21MIB 5ADV Plus was manufactured in 2023. It features a high-torque spindle capable of 10,000 rpm and a robust automatic oil lubrication system. The machine includes a center-through coolant system and a servo turret for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill D21MIB 5ADV Plus vertical machining centre we have for sale. Contact us for further details.

Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterru ...

Manufacturer: Fanuc Model: ARC Mate 100ic 8L Year of Manufacture: 2015 Type of Machine : Welding Robot Condition: Used Technical Specifications - Number of axes: 7 - Reach: 2,200 mm - Controller: Fanuc System R-30iB - Welding system: Kemppi KempArc Puls 450 System Dimensions - Length: 11,000 mm - Width: 5,000 mm - Height: 2,500 mm - Robot rail travel: 7,500 mm Included with the Machine - Full protective enclosure of the system as shown in photos - Rotary positioner (Drehtisch) included - Software for offline programming included - On-site operator training available on request - Dismantling support provided - loading assistance available on site Find more here - / Contact us at -

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 palletizing robot 6-axis robot, for payloads up to 165 g, set to Euro pallet dimensions, robot reach 2655 mm, The robot is energized due to programming, installation dimensions 771 x 610 mm, average power 2.5 kW, electrical voltage 380 - 575 V, mechanical protection IP54, wrist and arm protection IP67 The plant was shut down in 2024. Roller conveyor and feed conveyor belt can be purchased for an extra charge

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm total power requirement: kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robot Fanuc M710iC/20L , R30iA complete Year of manufacture: 6/2012 Control: R30iA Number of Axes: 6 Max. Payload: 20 kg max. Working range: approx. 3110 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Fanuc LR Mate 200iC/5L R30iA Robot Control: R30iA Year of manufacture: 11/07 Number of axes: 6 Max. load capacity: 5kg Max. working range: approx. 892 mm Scope of delivery: robot, controller, scope of delivery, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M710iC/50, R30iA complete Year of manufacture: 7/2006 Control: R30iA Number of axes: 6 Max. load capacity: 50 kg Max. working range: approx. 2050 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Compact cell Fanuc ArcMate 100/7L with R30iB control , Lorch S3 pulse welder new Number of axes: 6 Max. load capacity: 7Kg Max. working range: approx. 1633 mm Year of Make: 2016 Table surface each 750x500mm Total dimensions: approx. 2500x1500x2200 Total weight: approx. 2000kg In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M20iA , R30iA complete Year of manufacture: 8/2012 Control: R30iA Number of axes: 6 Max. load capacity: 20 kg Max. working range: approx. 1811 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc S-500iB , R-J3iB with 7th axis/motor Year of manufacture: 8/2006 Control: R-J3iB Number of axes: 6 Max. load capacity: 15 kg max. working range: approx. 2757 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Manufacturer:Fanuc Type of Machine : Robot Year of Manufacture: 2022 Technical Specifications - Controlled Axes: 6 - Max Load Capacity at Wrist: 7 kg (15.4 lb) - Reach: 911 mm (35.9 in) - Repeatability: 0.010 mm (0.0004 in) - Robot Weight: 27.0 kg (60 lb) Find more here - / Contact us at -

Robot Fanuc LR Mate 200iB R-J3iB Control: R-J3iB Number of axes: 6 Max. load capacity: 7 kg Max. working range: approx. 717 mm radius Year of Make: 2003 Scope of delivery: robot, controller, cable, teach panel, operating instructions, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - / Contact us at -

Number of axes: 6, repeatability: +/-0.08mm, mechanical unit weight: 145kg, max. wrist payload: 3kg, max. reach: 1437mm, axis working range: A1: 360°, A2: 250°, A3: 455°, A4: 380°, A5: 280°, A6: 720°, axis speed: A1: 225°/s, A2: 215°/s, A3: 225°/s, A4: 425°/s, A5: 425°/s, A6: 625°/s, inertia: A4: 8.9Nm/0.28kgm², A5: 8.9Nm/0.28kgm², A6: 3Nm/0.035kgm², installation dimensions: 283x283mm, control unit weight: 40kg, with control system. An on-site inspection is possible.

Total weight: 1,370 kg Load capacity: 210 kg Reach of the arms: 2,655 mm Control model: R-30iB Plus The robot is new and unused, on original pallet. Robot Options: 2 x Digital Input Assembly AID16D 2 x Digital Output Module AOD16D Software Option: Dual Check Safety (DCS) Position / Speed Check Function Software Option: Dual Check Safety SAFE I/O Connection Function Software Option: Touch Skip Function Software Option: Motion Package Software Option: User Socket Message

Robot Fanuc M-10iA, R30iA complete Year of manufacture: 6/2008 Control: R30iA Number of axes: 6 Max. load capacity: 10 kg Max. working range: approx. 1420 mm

General SKU215W150 LocationBarneveld CEcheck MakeFansider Main Features Motor1.1 KW Length2100 mm Inlet diameter160 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter160 mm Length2100 mm Between inlet and outlet1510 mm Shaft diameter90 mm Pitch100 mm Inlet580 x 160 mm OutletDia. 160 mm Motor1,1 kW, 400V, 1435 rpm Screw speed23 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) With jacketcheck General TypeCT168 Mach.No.21443 Year of construction2022 Floorspace3,45 x 0,80 m Total height0,40 m Weight410 kg Extra SpecificationsCap. Approx 1800 l/hOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolvents ...

A Fanuc/DMG Mori robot handling system for CNC machines that was used with a CTX is available. Robot type: Fanuc M-20iA, Gripper 1: double gripper, Gripper 2: shaft gripper, max. workpiece weight in single-gripper operation/double-gripper operation: 10kg/2x5kg, max. workpiece diameter: 125mm, weight: approx. 1075kg. Including various storage stations and safety enclosure. Documentation available. An on-site inspection is possible.

This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Two Chiron units in combination with two x Fanuc M - 20iA (2011)

This 6-axis FANUC ARC Mate 100iC welding robot was manufactured in 2011. Ideal for precision welding tasks, it offers robust construction and reliable performance. If you are looking to get high-quality welding capabilities, consider the FANUC ARC Mate 100iC machine we have for sale. Contact us for more information.

Key data: 320 mm, 220 mm, 255 mm

Inv. Num. : 9242 Type: Alpha-0iC Producer: FANUC Created: 2005 Parameters: Control System: FANUC Series 180-is-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (-): 120 mm Feed length in the V-axis (-): 120 mm Max. workpiece weight: 500 kg Machine weight: 1200 kg

Used Robot Depalletizer Fanuc 2003 – The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations? Look no further than the 2003 Fanuc Robot Depalletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and an available base, this depalletizer is designed specifically for depalletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can depalletize products up to a height of almost 2.7 meters. The integrated base and controller in the pedestal (or the available non ...

Used Robot Palletizer FANUC 10800 bph General Description of the Robot The Used Robot Palletizer FANUC 10800 bph is a high-performance industrial robotic unit specifically designed for automated palletizing operations in bottling plants. The configuration combines the FANUC R-2000iC/165F robot and the R-30iB Plus controller. As a result, the system ensures excellent reliability, mechanical robustness, and positioning accuracy in high-intensity production environments. Operational Capacity and Mechanical Configuration Equipped with a six-axis articulated arm, the Used Robot Palletizer FANUC 10800 bph delivers ±0.05 mm repeatability, in full compliance with ISO 9283 standards. Furthermore, it achieves a maximum reach of 2655 mm and supports payloads of up to 165 kg at the wrist. Thanks to its rotating arm design, the system executes palletizing cycles with high precision. In particular, i ...

Used Robot Palletizer Fanuc 2003 – The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations? Look no further than the 2003 Fanuc Robot Palletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and available base, this palletizer is designed specifically for palletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can develop pallets up to a height of almost 3 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) sav ...

- Thick turret WILSON tool system - Large package tooling WILSON - Auto indexing Rotation tools included - Laser Safety guids included 

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Sch ...

This 6-axis FANUC Robot S-430i W was manufactured in 2000. It features a maximum load capacity of 165 kg and a maximum reach of 2,643 mm, making it suitable for various automation tasks. If you are looking to get high-quality robotic capabilities, consider the FANUC Robot S-430i W robot arm we have for sale. Contact us for further details.

A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible.

A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible.

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

CATALOG NO. 6887 TECHNICAL SPECIFICATIONS - track width 340mm - shaft width 350mm - max disc diameter 400mm - blade bore diameter 70mm - max cutting height 130mm in advance: - 2 rows of ratchets - 2 smooth pressure shafts, slip shafts -Pressure - shaft with saws - 2 smooth pressure shafts, slip shafts from below: -Guide -Triggers -caterpillar - smooth regulation of feed speed - electric body lifting - main engine 37kW - feed motor 1,5kW - central lubrication - table top dimension 1930x840mm - dimensions length / width / height 2250x1650x1600mm - weight 2900kg – Italian production – used multi-saw – very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

We sell new bagel machines

Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...

Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...

Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running directio ...

Schulz roller curve conveyor right with straight section and pusher 90°-450-390 IR795+650-450-390 RA1200 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Center radius: 1,000 mm Straight section: Conveyor length (FL): 650 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Conveying gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: Round belt curve + straight section 2. electric drive for chain scraper Shipping dimensions: LxWxH: 2100x700x800 mm Scope of delivery: incl. side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running di ...

Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very g ...

Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round ...