3 kw fan used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Manufacturer: Fischer, pressure booster cylinder from Fischer DHS 12 / 3000 guillotine shears -Shaft: Ø 65 mm -Dimensions: 1125/340 / H580 mm -Weight: 326 kg

Alignment ruler, alignment rail, steel ruler -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg

turning diameter: 200 mm turning length: 0,0 mm control: Siemens 810 D working spindle speed range: 4200 U/min travel -x axis: 210 mm travel -z axis: 610 mm spindle passage: 65 mm total power requirement: 0,0 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor -Manufacturer: RS/Arcol power resistor HS300 47R J -Type: 136-323 47R J -Power: 300 W -Dimensions: 180/70/H40 mm -Weight: 0.6 kg

The scope of delivery includes: 01x Stage support, new Manufacturer: SSI Schaefer Design: Corner connection / 90° suitable for CS Sigma profiles with a profile height of 300 mm Type of screw connection: internal Material color: sendzimir galvanized Technical data for the stage carrier: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: Sirius type 3RV1031-4DB10 -Current strength: 18 - 25 A. -Dimensions: 150/60/H160 mm -Weight: 1.1 kg

Converter, power supply, power supply, switching power supply -Manufacturer: Siemens power supply unit -Type: 3RX9307-1AAOO -Input: 102-132 V AC/195-253 V AC -Output: 30 V DC/4 A -Price: per piece -Number: 5 pieces -Dimensions: 110/75/H135 mm -Weight: 1.2 kg/piece

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 330 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Dimensions: 485/53/H53 mm -Weight: 1.9 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 10.FO.R11-3429 -Input: 330...480 V 50/60 Hz -Dimensions: 340/235/H85 mm -Weight: 4.1 kg

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.

electric motor, three-phase motor -Manufacturer: SEW, electric motor unfortunately no type designation -Power output: approx. 1.1 kW -Speed: 1500 rpm -Voltage: 220/380 V -Shaft: Ø 12 x 20 mm -Design: B3/B5 -Dimensions: 300/225/H200 mm -Weight: 19 kg

Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized -Price: complete -Dimensions: 3000/820/H120 mm -Weight: 212 kg

Control device for electric forklift, electric motor, DC motor, traction motor, drive motor, motor control, motor controller, control, drive control, voltage converter -Manufacturer: Still, voltage converter -Type: 372641 -Voltage: SEC 24 V 16 A/PRIM 48 V-80 V -Dimensions: 185/170/H140 mm -Weight: 4.2 kg

• Description: Versatile punch with many inserts • Power: max. pressure: 35t • Working height: approx. 1000 mm • Dimensions: 1350 x 850 x 1724 mm • Weight: 1540 kg • In operation since: 06.1998 • Accessories: Trolley with many suitable tools

Used tablet press made by KORSCH Pharmapress 300 series. Model PH 343. Tablet diameter 6-13mm. 43 stations. 4 pieces available (2 x 1984, 1 x 1989, 1 x 1990)

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Three-phase motor, electric motor -Power: 2.7 kW -Speed: 1450 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Dimensions: 410/310/H240 mm -Weight: 36 kg

Powder dispersing plant (powder mixer) Manafacturer: Frystam Shear Pump: Type: FSPE 3532 D No.: 0574460006 Power: 11-22 kW Centrifugal pump: Type: FZ 20 A Power: 7.5-11 kW complete system on a mobile frame with integrated hopper(diameter: 690 mm); Capacity: approx. 65 l with inlet and outlet with sight glass with control cabinet in EEx protection Condition as good as new, rarely in operation LWH: 1350 x 900 x 1050 mm Weight: approx. 350 kg

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel -Manufacturer: Jungheinrich, forklift drive wheel -Wheel size: Ø 310 x 105 mm -Pitch circle: Ø 113/18 mm -Weight: 13.2 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 330 mm -Clamping force: max. 1500 daN -Thread: M16 -Weight: 83 kg

Wire-O punching machine Make Bomco Model EPS-330 Year Working width 330 mm Tools 3:1 Wire-O tool with round holes Details Electric, other tools can be purchased Available direct

turning diameter: 820 mm turning length: 300 mm turning diameter over slide: 465 mm control: max. torque on the spindle: 3000 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: mm steady: mm main drive motor: 50 kW diameter of main spindle: 170 mm spindle passage: 128 mm tailstock quill diameter: 125 mm tailstock quill stroke: 250 mm z-axis: 3000 mm x-axis: 550 mm total power requirement: 52 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993

We have a revised 3412 integral motor unit available to be used as a generator or converted into a motorcycle pump. Manufacturer: CATERPILLAR Model: 3412 Arrangement: 2385363 Serial Number: 41202591 Power: 682 KW Type: Stationary Diesel Manufacture: 2004 Rated rotation: 1,800 RPM

Technical data for the pallet rack beam: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack traverse, used Material color: blue Box profile: 127 x 50 mm Truss type: PT36.127SN Agraffe: 3 HK (hook) clear width: 3,600 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chucks, four-jaw chucks, face plates -Outer diameter: 330 mm -Interior diameter: 100 mm -Short taper: size 6 (106.3 mm) -Rezess: O 252 mm -Hole circle: O 171 / O 18 mm -Dimension: O 330 / H35 mm -Weight: 16 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump steering pump -Type: 0 510 415 314 -Number: 2x pumps available -Price: per piece -Dimensions: 150/100/H90 mm -Weight: 2.2 kg

Technical data for the pallet rack beam: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack traverse, used Material color: sendz. galvanized Box profile: 120 x 50 mm Truss type: SLB 120|15 Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 2,700 kg, at the same time. distributed load 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting

Flexible hose, hydraulic hose, flexible connector steel pipe -Armored hose: flexible hose, length 1500 mm -Fitting: DN25 337PN40 DIN 2656 -Hole circle: Ø 85 x 14 mm -Price: per piece -Number: 5 pieces -Dimensions: Ø 115 x 1500 mm -Weight: 4.1 kg/piece

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Technical data for the pallet rack beam: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack traverse, used Material color: light blue Box profile: 100 x 50 mm Truss type: SLO 102|2 Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 1,300 kg, at the same time. distributed load 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

27 own barfeeds in stock or on arrival (Iemca-Lns-Top Automazioni) visit our website and ask for more details

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: F 4 M 2011 Engine No.: miscellaneous Power: 27 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous Gene. No.: Miscellaneous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 100 Dimensions of the power unit: Width approx. mm: 960 Height approx. mm: 1.236 Length appro ...

Wire electrode, welding wire, welding wire -Manufacturer: Bohler, started roll of MAG wire electrode -Type: DT 1.4829 AWS: ER 309 Ø 1.2 mm -Dimension: Ø 300/100 mm -Weight roll: 12.8 kg

Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm -Dimensions: 1440/760/H1745 mm -Weight: 712 kg

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Excess stainless steel pipes 42CrNi18-10 Dimension 20 x 1 x 3000 39 pieces a' 3 meters

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Angle: 90° -Dimensions: 55 x 133 mm, see drawing in the photos -Length: 365 mm -Weight: 9.8 kg

Computer monitor, operating unit, operating unit, keyboard, screen, control, industrial monitor -Manufacturer: Cybernet -Accessories: swivel arm, multiple adjustable -Dimensions: 600/200/H365 mm -Weight: 10 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Telescopic cylinder: 2-stage, single-acting -Piston rod: Ø 61/Ø 45 mm -Stroke total: 383 mm -Total length: retracted 340 mm -Cylinder holder: Ø 25 mm -Dimensions: 340/155/H100 mm -Weight: 11 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Roto Record, four-jaw chuck Ø 315 mm -Throughout: Ø 98 mm -Hole circle: Ø 290 mm -Weight: 30 kg

Processing plant Manafacturer: Fryma Type: Disho VK-300 (Nameplate missing) for cold production, without double jacket new control system, with Siemens touch panel with wiring diagram on request: with vacuum pump good condition LWH: 1650 x 800 x 2500 mm Weight: approx. 800 kg

Processing plant Manafacturer: Koruma Type: Disho V160/300 Filling volume: 300 l Batch volume: 240 l Year of construction: 1983 No.: 3143 Power: 18.5 kW with pneumatic vertical lift with pressure gauge & sight glass LWH: 1600 x 850 x 2200 mm

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -Dimensions: 3000/30/H116 mm -Weight: 48 kg