3 kw fan used for sale

Drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units each with 1667W, 400 V ( length 2360mm ) Air flow for this system is: 3m3 /sec or 10.000m3 /hour 2 fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Key data: 700 °C, 30 mm, 1500 mm

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

Laser power: 3,000 watts Type: A04B-0820-B342 Weight system: 750 kg Dimensions LxWxH: 205 x 75 x 120 cm Equipped with: -Stabilizer - Fanuc Power Converter DTU60/2/0/5S - CNC control Fanuc Series 31i-LB

This 3-axis FANUC ROBODRILL alpha-D21LiA5 was manufactured in 2015. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a weight of 2200 kg and is equipped with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL alpha-D21LiA5 vertical machining centre we have for sale. Contact us for further details.

This 5-axis FANUC ROBOCUT alpha-1iD was manufactured in 2007. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, allowing for precise machining. The machine can handle a maximum workpiece weight of 1000 kg. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha-1iD machine we have for sale. Contact us for further details.

This 4-axis FANUC ROBODRILL α-D21LiB was manufactured in 2018. It features an impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a robust clamping area of 850 × 410 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D21LiB vertical machining centre we have for sale. Contact us for further details.

Various devices and machines are available. 1) Small vibrating mill William Boulton. 2) Compressor motor KDT 2.80, power: 2.3kW, quantity: 3. 3) Roof ventilator, quantity: 2. 4) Oven. 5) Pump (DIA) SZ80-1KR 225. 6) Robot Fanuc M-410i, year of manufacture: 1997. On-site inspection is possible.

ROBOT 6 axis FANUC Model : M-710iC/45M Reach : 2606 mm Installation : Floor, upside-down, wall and angle mount Repeatability : 0.1 mm Payload : 45 KG Weight : 570 kg Application: Assembly, Spot Welding, Load Transfer, Dispensing, Arc Welding, Pick/Pack/Palletizing, Material Removal

This 6-axis FANUC M-10iA / 8L robot arm was manufactured in 2018. It features a maximum reach of 2032 mm, a sound power level of 57.4 dB, and operates within an ambient temperature range of 0-45°C. The robot includes an R-30iB Plus controller and supports a maximum wrist load of 8 kg. Consider the opportunity to buy this FANUC M-10iA / 8L robot arm. Contact us for more information about this machine.

FANUC ROBOCUT α-1iC wire EDM machine wire cut EDM machine Year of manufacture 2004 Type A04B-0316-B001#E5 FANUC ROBOCUT α-1iC Technical Data Specification Details Machine Type: CNC Wire EDM Machine Model No.: ROBOCUT α-1iC Your article number: A04B-0316-B001#E5 Date of manufacture: March 2004 Serial Number: P043C1119 CNC Control: FANUC Series 180is-WB Controlled axes: 5 – X, Y, Z, U, V Travel X: 550 mm Travel Y: 370 mm Travel Z: approx. 310–410 mm (depending on configuration) Travel U: ±60 mm / 120 mm total Travel V: ±60 mm / 120 mm total Rapid traverse speed X/Y/Z: 900 mm/min Rapid traverse speed U/V: 450 mm/min Table size: approx. 780 × 600 mm Maximum workpiece approx. 820 × 730 × 300 mm Maximum workpiece weight 1,000 kg Wire diameter 0.10–0.30 mm Automatic wire threading: Yes Maximum conicity approx. ±30° Minimum programmable increment 0. ...

This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robots joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information.

CNC control in the control panel / machine operating terminalCNC path control FANUCTtype A14B - 0048 - 0002Year of construction: 1990- Machine control panel- electronic handwheel- Flexible silicone PC keyboardDimensions WxHxD: 600 x 260 x 350 mmWeight: approx. 40 kgComes from a GILDEMEISTER CNC lathe.From stock, function not tested, ideal as a spare parts carrier.; used

6-Axis AC Servo Drive, Servo Actuator, Servo Inverter, Servo Amplifier, Servo Controller, Frequency Converter, Drive Controller for RobotFANUC Type A06B-6105-H003No. V07Z08282NEU / unusedInput voltage: 200 - 240 VACNornpower: 1.5 kWAnnumber of axis outputs: 6Output current: 6 x 13 AGtotal output current: max. 78 AManual No.: B-81465Standard: EN50178Installed circuit boards: A16B-2000-0063/07D A16B-3200-0440/05C- Plexiglass cover not includedDimensions W x H x D 70 x 170 x 380

Very well-maintained Fanuc robots available immediately. They were previously used in a greenhouse in the Netherlands for moving and packaging pots. The robots can easily be adapted to your specific requirements. If you are interested, please feel free to contact us directly. Year: 2000 Brand: Fanuc Model: A05B-1321-B203 Country of manufacture: Japan

Key data: 2500 mm, 8000 mm

Poreba TZB-250 CNC Heavy Duty Modular Lathe Fanuc Oi-TF CNC Control with MPG Pendant (Retrofit 2015), 78.74” 4-Jaw Face Plate Type Chuck, 98.42” Swing Over Bed, 314.96” Maximum Turning Length, 125.98” Maximum Swing Over Gap, Spindle Speeds 0.5-1000 RPM, 4.13” Spindle Bore, 4-Way Tool Post, 35,275 Lbs. Approx. Weight Capacity (Unsupported), Power Tailstock, Open Steady Rest, 75 HP Spindle Motor, S/N 1132 070

For sale is a good used CNC wire EDM machine of the brand Fanuc Robocut Alpha C600iB from November 2016. The EDM machine is immediately available. Prior sale and errors excepted.

Fanuc ROBODRILL ALFA T10 B, Built in 1995 Revolutions 8000 rpm Picture Sk 30 Control Fanuc 16 M Tool changer 10-fold

EDM machine Fanuc Robocut a1iB BJ 2002

This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information.

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:35 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:35 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

DIMENSIONS / WEIGHTS:. - total height:35 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Robot pedestal for industrial robots The platform provides a stable and raised platform for the robot to ensure optimal positioning in the work area. Applications • Industrial robotics •Manufacturing processes • Material handling • Assembly and production lines Metrics: Mounting plate 1080 x 1030 mm Base plate 1230 x 1180 mm Material thickness: 25 mm Height: 700 mm More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction 2006 Control Fanuc 18iS-WB Travel X/Y/Z/V/U 550/370/310/120/120 mm i-Plus high-performance generator Wire system: AWF system for automatic and safe threading. Start hole search function, threading in the cutting gap, short circuit Alarm function Equipment:Dielectric cooler, coolant tank, Aut. Rotary Insertion, Interface RS 232, El. Handwheel, Manuals Stenter frame: Erowa Please ask for price and pictures! This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. No returns for used goods. 3 months warranty.

- Number of baking plates: 76 - Output: approx. 4000 pieces / hour - Cone size: max. 195 mm Equipment: - Incl. winding head - incl. Stacking table - incl. cooling band

industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

This FANUC ARC Mate OiB robot arm was manufactured in 2015. It features a maximum load capacity of 3kg. Consider the opportunity to buy this FANUC ARC Mate OiB robot arm. Contact us for more information.

This 6-axis FANUC R2000iB/165F robot arm was manufactured in 2013. Ideal for automation tasks, it enhances precision and efficiency in production lines. Consider the opportunity to buy this FANUC R2000iB/165F robot arm. Contact us for more information.

This 4-axis FANUC Robodrill Alpha-D21LiB5 was manufactured in 2016. A vertical machining center featuring a 4th axis continuous table, spindle speeds up to 10,000 rpm, and a high-pressure system through the spindle at 15 bar. With less than 2000 working hours, it includes a tool magazine with a capacity of 21 and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the FANUC Robodrill Alpha-D21LiB5 machine we have for sale. Contact us for more information.

This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information.

This 6-axis FANUC M-16iB robot arm was manufactured in 2005. Ideal for automation tasks, it enhances precision and efficiency in operations. Consider the opportunity to buy this FANUC M-16iB robot arm. Contact us for more information.

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

This 6-axis FANUC M-6iB robot arm was manufactured in 2007, featuring a robust design with a 380-415V power supply, digital servo function, and password protection. It includes a handling tool, basic software, and a CE sign option. Ideal for automation tasks requiring precision and reliability. If you are looking to get high-quality automation capabilities consider the FANUC M-6iB machine we have for sale. Contact us for more information about this machine.

A Fanuc robot that was mounted on an injection molding machine is available. Axes: 6, payload: 3kg, reach: 700mm, repeatability: +/-0.04mm, control system: Fanuc System R-J3, weight: approx. 180kg, operating hours: approx. 80000. Including control cabinet and operator panel. Documentation available. On-site inspection is possible.