3 kw fan used for sale

; Gross weight [kg]: 10213; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel, Including: Engine coolant and alternator heater

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

Type: S 300 l 2P-V Complete stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 4.4 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of machine in cm: Width: 135 Lenght: 84 Height: 142 Delivery time: after advanced payment, one working day

Hand control for robots with cable

We offer a Doka Framax 270 and 135 formwork 485.87m² complete with accessories on request. The formwork is completely cleaned, checked and ready for immediate use. Can be used for fair-faced concrete class 2/3 without any problems. Partly recovered with phenolic resin plates 220- 240g film coating, Finnish birch through and through, BFU 100 glued. New value approx. 352.817,00€ - Special net price: 124.853,00€ Pcs. Description 3 Framax Xlife-Element 2.40x2.70m new panel - Doka rental warehouse 5 Framax Xlife-Element 2.40x2.70m Doka rental warehouse 9 Framax Xlife-Element 1.35x2.70m new panel - Doka Rental Warehouse 32 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 9 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 8 Framax Xlife-Uni-Element 0.90x2.70m Doka rental warehouse 8 Framax Xlife-Element 0.90x2.70m Doka rental warehouse 8 Framax Xlife- ...

Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimension: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm The scope of delivery includes: 02x Workbench stand, used Material colour: sendzimir galvanised Stand height: 900 mm Stand depth: 800 mm Stand profile: 100 x 100 x 3.00 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss Type: BX100/50/15 Clear width: 1,140 mm 08x Safety pins, used Design: completely galvanized 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,350 mm Particleboard depth: 820 mm Particleboard one-piece 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,120 mm Partic ...

Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimension: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm The scope of delivery includes: 02x Workbench stand, used Material colour: sendzimir galvanised Stand height: 900 mm Stand depth: 800 mm Stand profile: 100 x 100 x 3.00 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 02x Workbench trusses, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO89|2 Clear width: 1,140 mm 04x Locking pins, used Design: completely galvanized 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,350 mm Particleboard depth: 820 mm Particleboard one-piece 06x Self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The pict ...

Blasthouse components as a kit for self-assembly or by assembly by our specialist personnel. Flat conveying floor, transverse screw conveyor, bucket elevator, wind screening, sieve, abrasive bunker, blasting device, filter system, blow-in system, suction wall and electrical control.

CALEVA MODEL 380A STAINLESS STEEL SPHERONIZER REF.: E0013 Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet with local controls. General characteristics: Manufactured by CALEVA Model 380A Material Stainless steel Motor characteristics: Voltage 415 V Power 1.5 kW - 2 cv Frequency 50 Hz

Kontron 325 Tenar Low Pressure Gradient Pump Pump HPLC up to 10mL Pumping System -Pump system for tenary low-pressure gradients -All devices for low-pressure gradients integrated in one solution system -10 programs with individual instructions -Column Shock Protection extends durability-Intelligent commissibility compensation -Stackable with other/other HPLC modules -Full control of the AUtosampler 360 via the keyboard with a display Type: double series piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby and sapphire Flow: 0.05 to 10 mL per minute Flow Rate Precision:

The ASCO CB 3000 conveyor belt is a reliable and versatile solution for transporting a wide range of bulk materials such as sand, soil, gravel, compost, and building materials. With its sturdy construction and 3-meter length, it handles daily use in demanding environments like construction sites, recycling facilities, horticulture, and industrial operations. The CB 3000 offers adjustable belt speed, angle, and length, allowing it to adapt to different tasks and growing project requirements. Its modular design makes it easy to expand when longer distances need to be covered. An integrated operating hours counter helps plan maintenance and monitor usage efficiently. Designed for long service life and minimal upkeep, the ASCO CB 3000 ensures smooth, continuous material flow as part of screening systems or as a stand-alone conveyor. This robust conveyor belt combines flexibility, dur ...

Copeland compressor unit Type: D6DT5-320X-AWM/D (x4) Volume: 4 x 126.9 m3/h Cooling capacity: 220 kW przy -10°C/40°C, 56 kW przy -35°C/40°C Refrigerant: R404A Reference number: Z17 Pieces in stock: 1 Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Key data: 3 t, 150 mm

For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Span width approx. 850 mm - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping base 750 mm - Clamping base dimensions 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs - Total number of clamping holes 772 pcs - Internal dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping areas approx. 40 mm - laterally screwed on 3 jaw lining 300 mm - side-screwed hydr. Machine vice RÖHM - Jaw width 200 mm - Weight approx. 700 kg

The extrusion line is a COEX cast film line. Processing of thermoplastics in a processing range of 150-300°C. Possible layer structures: - Monofilms - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) Plant data: Total system output max. 2230 kg/h Extruder A: 90/33 L/D max. 330kg/h Extruder B.: 135/33 L/D max. 950kg/h Extruder C.: 135/33 L/D max. 950kg/h Film width NET: 1600 - 2110mm; Center cut for 2 bobsleighs possible (2x 800 – 2x 1055mm) Thickness: 25-580μm Production speed 10 - 150m/min Roll width 2500 mm roll weight 2000kg Additional components (quality): non-contact thickness gauge for automatic nozzle with automatic cross profile control on both sides Corona pretreatment (max. 12000W) Optical surface inspection system incl. defect marking in open and pass-through light Ancillary equipment: Dryer 1 – 4 with 4500 liters volume ; Heating capacity 48kw dryer 5 ...

R1304Injection moulding machine ARBURG 270-350-90 Multronica thermoset the previous owner sold the Multronica controller for 2,500€ I wanted to convert the machine to thermoplastic. I also found a Multronica controller. There are the following options ---------------------------------------------------------------------- ----------- without control, without funnel, without thermoset device as Spare parts carrier (engine, pump, valves, cylinders, electrics, etc.) €800,-- ---------------------------------------------------------------------- ------------------- with thermoset module + replacement Multronica for assembly €1000.-- ---------------------------------------------------------------------- --------------------- with additional thermoplastic module €1200.-- ---------------------------------------------------------------------- --------------------- all prices +VA ...

Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW

Subject: Pre-Owned Power Plant – Jenbacher JGC 312 GS-L Engine – 625 kW – Complete Equipment Dear Sir or Madam, We are pleased to offer for sale a complete power plant, fully operational and ready for use, comprising the following: 1. Engine Container 40 ft Jenbacher JGC 312 GS-L (Equip2 D4UN Masterpack NW12 H1) – nameplate year 2009 at 40.000 hour , overhauled in 2018 Power output: 625 kW Stamford alternator – continuous power 765 kVA Equipment included: DIA.NE TX control panels, silencer, heat exchanger, exhaust, control cabinet Roof fitted with a skid comprising: plate heat exchanger, flue gas heat exchanger, silencer 2. Electrical Container 40 ft Room equipped with electrical cabinets and a delivery substation Transformer 800 kVA – 20 kV / 400 V Roof-mounted air heater skid Price for the complete plant: €50,000 (ex-VAT), ex-wor ...

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

We sell 600 x HP/Brocade 32Gbit SFPs, used, tested, 6.50 USD each Brocade P/N: 57-1000333-01 21CFR1040.10 32G SW HP P/N: PLC: 871362-001 Pictures on request. These SFPs have an original Brocade label and a HPE spare part number. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORAC ...

We sell 160 x Broadcom VSE-225-31S 25/40Gbit SFP+ In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all the ...

Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer a Mitsubishi Industry 6-axis articulated arm robot. RV Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV series offers a highly dynamic 6-axis articulated robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

We sell 500 x Dell PowerEdge T320/330/340, R340 series systems In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions ...

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

We sell 1 x HP 3PAR StoreServ 8450, 4 controller, All-Flash system Equipped with: 64 x 1.92TB SSDs 32 x 3.84TB 8K SSDs 20 x 3.84TB 8K SSDs 48 x 3.84TB 8K SSDs In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales a ...

Basket to keep the glove

We sell 12 x Dell PowerEdge R340 2 x Dell PowerEdge T320 169 x Dell PowerEdge T340 Total: 183 In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and co ...

sheet width: 3050 mm plate thickness: 6 mm distance between columns: mm blade length: 3050 mm total power requirement: 11 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 2,1 x 3,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Filter area : 6 m2 - Machine in good condition

Recon Part Number: 117753 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

We sell 2 x Cisco Nexus 3132Q-X, 1 x Cisco Nexus 3172TQ In total we have this from the same project including the above: 1 x Cisco N3K-C3048TP-1GE-V01 (may be non-working) 1 x Cisco 2248-TP-E 1 x Cisco 2248-TP 2 x Cisco Nexus 3132Q-X, 1 x Cisco Nexus 3172TQ 4 x Cisco N6K-C6001-64P 4 x Cisco 5548-UP In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisc ...

We sell 80 x HPE Aruba AP-315 (APINE0315) Access Points In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from a ...

cutting length: 3100 mm cutting thickness: 10 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Weight: approx. 10,000 kg

RECON Part Number: 103178 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

We sell 4 x Fortinet FortiGate 3800D In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manufactur ...

; Gross weight [kg]: 2789; Engine: TAD1341GE; Accessories: Tanker, Battery, Control Panel, including: coolant Heater and battery charger; Water Tank Volume [l]: 515

RECON ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...

RECON -Part Number: 1605919 - Diesel ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

MARCHESINI CASE PACKER PS-300 Year of manufacturing: 2006 Semi-automatic case packer for small to medium output production requirements. For use in various industries, including pharmaceutical, cosmetics, nutraceutical, FMCG, medical devices. Used, in excellent conditions and complete with manuals. Wide range of cases and products working sizes • Case feeding area safe and free from any mechanical movement • Fully enclosed structure with safety guards • Omron HMI • CE marked Output: up to 20 cases/min (depending on product type, individual box and case sizes) Case sizes • Length: 200 mm to 600 mm; Height 65 mm to 400 mm; Width: 125 mm to 400 mm Individual box sizes • Length: 25 mm to 580 mm; Height: 65 mm to 300 mm;Width: 10 mm to 120 mm DIMENSIONS • Size: 2300 mm x 1500 mm (incl. outfeed roller conveyor) x 1900 mm; Weight: 650 kg

Centrifugal pump with magnetic coupling.

Centrifugal pump with magnetic coupling.