3 kw fan used for sale

Pneumatic cylinder, standard cylinder, double-acting FESTO ADN-32-300-A-PPS-A 536267 stroke: 300 mm piston diameter: Ø 32 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, length: 18 mm pmax: 10 bar used, checked! Dimensions: 375 x 48 x 48 mm

Pneumatic cylinders, variant cylinders, round cylinders, double-acting SMC CM2B32-300 CM2B32-DCG9747G-300 stroke: 300 mm piston diameter: Ø 32 mm rod diameter: Ø 12 mm rod thread: M10 x 1.25, length: 20 mm pmax: 1,1,0 MPa ( 10 bar ) mounting thread: M26 x 1.5, length: 14 mm New ! Dimensions: 425 x 35 x 35 mm

Pneumatic cylinder, standard cylinder, double-acting SMC CP95SDB40-350-XC4 stroke: 350 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25, length: 22 mm pmax: 1.0 MPa ( 10 bar ) used, tested ! Dimensions: 515 x 53 x 53 mm

Linear actuator, special cylinder FESTO DGO-25-350-PPV-A-B 11917068 stroke: 350 mm piston diameter: Ø 25 mm rod diameter: Ø 26,5 mm rod thread: 2x M22 x 1.5, length: 15 mm slide: 15 x 50 x 50 mm pmax: 7 bar New ! Dimensions: 590 x 50 x 50 mm

Pneumatic cylinders, variant cylinders, round cylinders, double-acting SMC CD85N25-300-B stroke: 300 mm piston diameter: Ø 25 mm Rod diameter: Ø 10 mm Rod thread: M10 x 1,25, Length: 20 mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M22 x 1.5, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm width across flats nut: 32 mm New ! Dimensions ( without nut ): 440 x 30 x 30 mm

pneumatic cylinder, standard cylinder, double-acting FESTO ADN-40-300-A-PPS-A 536288 stroke: 300 mm piston diameter: Ø 40 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, length: 18 mm pmax: 10 bar used, checked! Dimensions: 363 x 54 x 54 mm

Pneumatic cylinders, standard cylinders, double-acting FESTO DNC-32-300-PPV-A 163304 stroke: 300 mm piston diameter: Ø 32 mm Rod diameter: Ø 12 mm rod thread: M10 x 1,25, length: 20 mm pmax: 12 bar used, tested ! Dimensions: 505 x 45 x 45 mm

Pneumatic cylinders, variant cylinders, round cylinders, double-acting FESTO DSNU-20-300-PPV-A 19244 < br />stroke: 250 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm rod thread: M8 x 1,25, length: 20 mm pmax: 10 bar mounting thread: M22 x 1.5, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm 2x nut, width across flats: 32 mm New ! Dimensions: 432 x 27 x 27 mm

pneumatic cylinder, standard cylinder, double-acting FESTO DNC-50-320-PPV-A 163378 stroke: 320 mm rod diameter Ø 20 mm pmax.: 12 bar used, tested ! Dimensions: 500 x 65 x 65 mm

Pneumatic cylinders, standard cylinders FESTO ADVU-32-300-A-P-A-S6 156094 stroke: 300 mm rod diameter: Ø 12 mm rod thread: M10 x 1.25 New ! Dimensions: 370 x 50 x 55 mm

Cleanroom cleaning wipes, 200 pieces VWR Spec-Wipe® 7 21913-216 115-0044 Size: 300 x 300 mm Material: polyester (knitted, edge-sealed washed) New ! Dimensions( packaging ): 330 x 300 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 300 x 300 mm height: 100 mm used, tested ! Dimensions: 300 x 300 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 300 x 300 mm height: 100 mm used, tested ! Dimensions: 300 x 300 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 300 x 300 mm height: 90 mm used, tested ! Dimensions: 300 x 300 x 90 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW NILES DH-B 315 x 3 x 6 outer Ø: 315 mm Bore Ø: 100 mm Height with jaws: 130 mm bolt circle: 33 / 290 mounting: M14 3 jaws extra Speed max.: 1800 rpm min. 20-240 mm max. 75-240 mm complete with inner and outer jaws Dimensions: 315 x 315 x 150 mm

4-jaw chuck, four-jaw chuck, lathe chuck WMW, ROTO RECORD DH 375 x 4-III TGL30-2332 n: max. 1100 rpm < br /> Outer Ø: 375 mm Centering Ø: 320 mm bolt circle Ø (chuck) : 345 mm bore Ø: 140 mm height with jaws: 137 mm with lathe chuck used, tested ! Dimensions ( lathe chuck ): 375 x 375 x 137 mm

Activated carbon filter with protective grille TEKA 970545 Filter dimensions: 305 x 305 x 70 mm Protective grille dimensions: 305 x 305 x 24 mm New ! Dimensions: 310 x 310 x 100 mm

4-jaw combination chuck, four-jaw chuck with individually and centrally adjustable jaws WMW, NILES DHK 315 x 4 ( DHK315x4 ) TGL 30-2333 < br />outer Ø: 315 mm centering Ø: 265 mm bolt circle Ø (chuck) : 290 mm bore Ø: 95 mm height with jaws: 160 mm including 2x chuck wrench jaws individually adjustable and rotatable used, tested ! dimensions ( lathe chuck ): 315 x 315 x 160 mm

Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 460 x 350 x 200 mm, weight approx.: 70 kg

Cable winch, hoist winch, construction winch, anchor winch -Mechanical winch -Holding force: 300 KN -with: freewheel and mechanical brake -Drum: Ø mm -Side washers: Ø mm -Drum length: mm -Operation by: hand lever -2x winches available: 1x left, 1x right -Price: per piece -Dimensions: 1140/750/H1120 mm -Weight: 760 kg/piece

AC servo motor, permanent magnet motor, with forced fan BAUMÜLLER VDOKFF 132 K46 ( VDOKFF132K46 ) 11 kW 1500 - 3000 rpm 292 - 400 V 51,4 - 118 Hz IP54 Shaft: Ø 42 mm Flange: 270 x 270 mm Forced fan: Engine A2D 250-AA 02-01 0,12 kW 2670 rpm 380 V 3AC used, tested ! Dimensions: 840 x 280 x 340 mm

Three-phase electric motor with brake and forced fan SEW CFV180L4/BM/HR/TF/V/EV2R nominal values: 94 A 3000 rpm 110 Nm 325 V 101 Hz ! only 3 phase inverter operation ! IP 54 shaft diameter: Ø 38 mm Flange: Ø 450 mm external fan type V180 New ! Dimensions: 1100 x 480 x 450 mm

Slicer, automatic vertical sausage slicer, from the Austrian manufacturer of the highest quality S.A.M., model 371.8 I fb. Made of stainless steel and anodized aluminum. Ideal machine for slicing and automatic placement, placing the product in different formats: stacked (block), horizontal fan stacking, vertical fan stacking and round or plate type format. It has different programs to configure, space between slices, units etc. Equipment totally rebuilt, revised and guaranteed. The S.A.M. is operated through the LCD screen by icons that are self-explanatory. It is also possible to save or reuse defined cutting parameters using a 3-digit PLU. Includes blade sharpener. FEATURES: Cart accommodating the product is 500mm long x 270mm wide. Product size: round min. 50mm max. 210mm, square max. 320x210mm. 370 mm diameter stainless steel cutting blade, cutting speed ...

Heating element, air heater, heater fan, hot air fan -Power: 3.0 kW -Number: 2x elements available -Price: per piece -Dimensions heating: 50/50/H160 mm -Weight: 0.26 kg

Volumetric flow limiter, volumetric flow controller, manually operated CBI 340 / 170 mm Pipe inner diameter: Ø 340 mm with reduction to pipe inner diameter: Ø 170 mm Flange diameter: Ø 410 mm Flange diameter (reduction): Ø 230 mm suitable centrifugal fan LU185 ! used, tested ! Dimensions: 770 x 600 x 530 mm

Gear motor, electric motor -Speed: 320 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -external fan -Weight: 30 kg

Servo motor, electric motor, DC motor -Max. Speed: 3455 rpm -Power: 3.9 kW 120 Hz -Torque: 10.8 Nm -external fan -Shaft: Ø 11 mm -Weight: 2 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan -Dimensions: 420/120/H650 mm -Weight: 32 kg

Gear motor, electric motor, electric gear motor -Electric gear motor: for crane cable reel -Speed: 3.7 rpm -Power: 300 Nm -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 44 -external fan -Number: 1x engine available -Price: per piece -Dimensions: 760/260/H300 mm -Weight: 51 kg

Geared motor, crane motor DEMAG, MANNESMANN DEMATIC AG ZBF 80 A 8/2 B020 ( ZBF80A8/2B020 ) 0,13 / 0.50 kW 380 / 190 rpm 400 V 3AC 50 Hz IP54 gear: Diameter: Ø 16 mm, Length: 20 mm, Teeth: 13 shaft bushing: Diameter: Ø 25 mm, Length: 15 mm flange: 140 x 140 mm / Ø 60 mm hole spacing: 161 / 97 mm 4x Bore: Ø 17 mm Fastening of the fan cover is damaged used, tested ! Dimensions: 440 x 160 x 215 mm

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT.  ...

Ladies and gentlemen, We are pleased to submit the following offer to you: Freezer up to minus 30 degrees. The freezer is installed in a hall. Built circa 1993 Height about 6 meters Area approx. 1,300 m2 Length about 30 meters Width about 40 meters Wall thickness approx. 170 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept any liability for use ...

Cat.-Nr. 10-1735 in a very good condition with Mixer on the top With Manhole on the top 400 mm With Airlock DN 300 With CIP Cleaning System With Inlet DN 50 With thread Connector DN 50 With Level Indicator With Mixer on the side With Conical Bottom with Outlet DN 50 On 4 Adjustable Feet Measurements: Total Height: 4000 mm Body Height: 2450 mm Diameter with out Mixer: 2400 mm Diameter with Mixer: 2800 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 06-1101-6 new with Floating Cover - round vertical on Feet Cat-Nr.06-1101-6 available : 5 Standard Features: • Manufacturer: Eurolux GmbH • Material: 1.4301 acc.DIN 17440 AISI 304, inside 3IIId = 2B – outside marbled • Surface fully pickled, passivated and neutralised • All welds are treated and not porous to prevent the occurance of unwanted bacteria. • Firm Legs that ensure stability of the whole vessel • Drain Port DN 50 • Level Indicator • Floating Lid with Accessories • Xiring-escape Valve • Air Pump • Transport Hooks for Lid on/off Volume: 1000 litres Diameter: 920 mm Height Cyl: 1500 mm Total Height: 1910 mm Feet Quantity: 3 Surcharges/unit: (Prices upon request) Butterfly Valve DN 50 Clap Lid Crane Support for Ladder Connecting Pipe for Clap Size 37 with Butterfly Valve DN 40=Clea ...

Cat-Nr. 12-2765 in a very good condition With Cooling Jacket Surface: Outside and Inside: 2B=IIIC Upper Bottom: With Manhole Lid round 400 mm with Clamp With Inlet Connector DN 25 Tank Body: Mit Threaded Connection for Cooling Jacket DN 23 Lower Bottom: With Flat Conical Bottom with Central Outlet With Outlet Discharge DN 65 reduced to DN 50 Butterfly Valve With Threaded Connection with Outlet on Cooling Jacket DN 15 Measurements and Weight: Height x Diameter: 1560 x 1220 mm Height Tank Body: 960 mm Weight: 270 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-No. 13.0327 in a very good condition ground inside and outside grain 180 for an additional charge with agitator upper bottom: • thread connection DN 50 and DN 25 tank body: • 2 openings for agitator Ø 450 mm and 280 mm lower bottom: • on 4 adjustable feets Measurements and weight: Height x diameter: 3400 x 2300 mm Height tank body: 2000 mm Weight: approx. 2 t Operating instruction for control valve and drawing available. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 09-1020 in a very good condition Standard Features: • with Manhole DN 400 x 300 mm • with Outlet Discharge DN 50 mm (DIN 11851) • with 2 x Connections on Manhole DN 50 mm (DIN 11851) • with Level Indicator DN 10 with Valve • with Connecting Flange for Mixer • with Filling Tube DN 30 mm • with 2 x Transport Hooks • with Connection Thread Measurements and Weight: Diameter: 2800 mm Diameter Cyl. incl.Filling Tube: 3000 mm Total Height: 6700 mm Weight approx: 3 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 08-1210 in a very good condition with flat bottom Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

Cat.-Nr. 11-1050 new COMPLETE For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Juice from Fruits and Vegetables Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper For emptying fruits or vegetables from wood or PVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2339 – Eurolux Automatic Continuous Belt Press EL-1000 for producing fruit juice and fruit wine, cider from apples, pears Capacity: up to 3000 kg/fresh fruits Cat-Nr 06-1101 – Eurolux Floating Lid Tanks in AISI 304 4 x 1000 Litres,4 x 500 Litres, 4 x 300 Litres Cat-Nr 10-2351 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 1500 Litres Juice/h Cat-Nr 10-2344 – Eurolux Bag-in-Box Filler EL-1800 For filling liquids (frui ...

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Cat.-Nr. 08-1209 in a very good condition with Flat Bottom Volume: approx. 25.000 Litre / Chamber Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-2070 in very good condition Material: V2A – AISI 304 (1.4301) – Surface: inside and outside 2B=IIIC Upper Bottom: With ventilation hose DN 350 With weld-on fitting centrally located on upper bottom DN 65 With T-distributor threaded connection, one side DN 25 other side DN 50 With 2 crane lugs Tank Body: With manhole lid 450x350 mm With connection flange DN 300 for agitator on the side With connector for spray ball under the agitator Lower Bottom: With outlet DN 100 centrally located On 5 adjustable feet Measurements and Weight: Length: 5450 mm Tank Body Height: 3900 mm Diameter: 3300 mm Weight: ca.3,5 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on d ...

Kat. No. 12-2170 in very good condition with anchor agitated mixer insulated DxH: 2650 x 4,300 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-2135 in a very good condition Bi-Aseptic with Mixer on the side DxH: 2100 x 5200 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

The Filler is optional working with or without PT To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.