3 axis cnc used for sale

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180 x 100 mm Working height: 925 mm saw blade turning speeds: 17 - 70 U/min total power requirement: 3,0 kW weight of the machine ca.: t dimensions of the machine ca.: 1,8 x 1,1 x 2,0 m Automatic cold circular saw - CNC control - Micro-lubrication system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Adjustable sheet arms front side - Parking stattion sheet arms left side - WILA Crowning - Under power

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

CATALOG NO. 6887 TECHNICAL SPECIFICATIONS - track width 340mm - shaft width 350mm - max disc diameter 400mm - blade bore diameter 70mm - max cutting height 130mm in advance: - 2 rows of ratchets - 2 smooth pressure shafts, slip shafts -Pressure - shaft with saws - 2 smooth pressure shafts, slip shafts from below: -Guide -Triggers -caterpillar - smooth regulation of feed speed - electric body lifting - main engine 37kW - feed motor 1,5kW - central lubrication - table top dimension 1930x840mm - dimensions length / width / height 2250x1650x1600mm - weight 2900kg – Italian production – used multi-saw – very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

We sell new bagel machines

Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...

Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...

Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running directio ...

Schulz roller curve conveyor right with straight section and pusher 90°-450-390 IR795+650-450-390 RA1200 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Center radius: 1,000 mm Straight section: Conveyor length (FL): 650 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Conveying gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: Round belt curve + straight section 2. electric drive for chain scraper Shipping dimensions: LxWxH: 2100x700x800 mm Scope of delivery: incl. side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running di ...

Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very g ...

Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round ...

Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Drive: Round belt continuous curve + straight section Scope of delivery: including side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: nominal voltage: 400 Running direction: LEFT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside w ...

Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal  ...

General SKU437W1415 MakeMedimex TypeMED 265 Mounted on legscheck Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity20 l. Vessel sizesDia. 550x600 mm Dished bottomcheck OutletPneumatic valve With jacketcheck With propellor stirrercheck Motor0,37 kW, 220/380 volt, 1410 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchcheck Floorspace1,10x1,0 m Total height2,20 m Weight850 kg Extra SpecificationsWith ToolTemp temperature controller, type TT400,stainless steel vertical pressure vessel, volume approx 30 l.Stainless Steel ReactorsMedimexReactors > Stainless Steel ReactorsBrand > Medimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

Manufacturer: Homag, Type: Optimat BAZ 311/40/K, Year: 2007, Software: PC85 CNC CORE Z, Feeding speed max m/min: X,Y-80, Z-30, Working range X: 4000, Working range Y-axis: 1220, Working range Z: 12-300, Year :2007

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany

Wiring harness axle 1-3, 3HAC050554-001, ABB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, High: 2.100 mm, Weight: 15.000 Kg, Accessories included:

Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

Frequency converter soft start 8.3 kVA SEW Movitrac Used frequency inverters, approximately 3 years in operation, increasing the engine power, currently no longer in use. Unit tested and fully functional. Technical data: f input = 50-60 Hz f output = 0-400 Hz power 8, 3kVA in = UE = 380-500V 12A UA UE = No guarantee you can return but within according to the FU 10 business days and we will refund the purchase price. Information at 0170-2204056 or fa.raupp@t-online

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Höchstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Hydraulic radial engine manufacturer Calzoni MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 bar Used Husky injection moulding machine, type GL225RS60/50

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

Battenfeld UTR 300 heating controller for control of Unilog 4000 B

System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

Flat cutter 315 mm

Fluid mixer for tempered mixing with double sheath, 350 l. content (usable volume: 100 l. - 280 l.), outlet sideways, pressure-resistant up to 10 bar, product-contacted parts made of V2A 1.4541; without tools.

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

We offer: Roller E 247165 Defect roller Crushing roller for TBA 8 aseptic filling machine Intermediate sale reserved

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

5 sets of knives for the three-knife trimmer Muller Martini Zenith 3672 Tungsten Carbide Quatro

Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV B7ssq0vkzj Year of construction : 2012 Condition : New with 1 year warranty Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.

Diesel tank - Heating oil tank - Tank system - Steel tank brand new - with 30,000 litres capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 9010 white. (Other RAL colours are also possible on request!) L = approx. 10.00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - General: You will receive a V ...

Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg

Stick electrodes 3.25 x 350 -Manufacturer: Avesta -Type: 309L Ø 3.25 x 350 mm -Dimensions: 375/65/H65 mm -Weight: 4.3 kg

Stick electrodes 2.2 x 350 -Elga: Cromarod 308L for V2A/V4A -Dimension: Ø 68 x 355 mm -Weight: 3 kg

electric motor, three-phase motor -Power: 0.18 kW -Electric motor: 3000 rpm -Voltage: 220/380 V -Shaft: Ø 14 x 30 mm -Design: B5 -Dimensions: 250/144/H165 mm -Weight: 6.3 kg

Stick electrodes 4.0 x 350 -Type: Phoenix 330.1 SH Purple R -Weight per package: 4.9 kg