3 axis cnc used for sale

This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

This Baykal HNC 3100x13 shearing machine was manufactured in 2009. It features a cutting capacity for St 42 at 13 mm and a cutting length of 3060 mm. Main voltage is 380/50/3 with a robust 30 kW motor. The machines substantial weight of 13000 kg ensures stability and precision in operation. For more information about this shearing machine, please reach out to us.

This 3-axis IMA BIMA 210 120/300 was manufactured in 2006. It features a large axis travel (X = 3000 mm, Y = 1200 mm, Z = 100 mm), accommodating workpieces up to 2800 mm in length and 1200 mm in width. The main spindle delivers power of 7.5 kW with speeds ranging from 8,000 to 24,000 rpm. It weighs approximately 6200 kg and includes IMA IMATRONIC CNC control. Contact us for more information about this machine.

This 3-axis MASTERWOOD Project 315 was manufactured in 2007. A robust CNC router with a working size of approximately 120 x 280 cm, it features a 12-slot changer and a powerful vacuum pump rated at 90 m3. The computer was updated in 2023, and the axis control was renewed in 2018. If you are looking to get high-quality milling capabilities, consider the MASTERWOOD Project 315 machine we have for sale. Contact us for more information.

MANURHIN KMX 326 C sliding head lathe was built in 2008 in France by MANURHIN KMX. The machine, distinguished by its high efficiency, was specially designed for precision machining of workpieces with even the most complex geometries. All machining processes, i.e. precision drilling, threading and turning are performed by means of a reliable spindle and tools taken from two capacious turrets. The MANURHIN KMX 326C CNC automatic lathe is offered with equipment, consisting of, among others, a CNC controller, bar feeder and tooling. The total weight of the machine is 2600 kg. Technical specifications of the MANURHIN KMX 326 C CNC lathe - CNC controller: GE FANUC Series 18i-TB - number of axes: 5 (X1, X2, Y, Z, C) - spindle rotational speed: 50-7200 rpm - spindle bore: 26 mm - spindle stroke: 160 mm - 6-position turret (2 pcs.) - bar feeder: FMB turbo 3-36 - toolholders - collets  ...

gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2

Key data: 32 mm, 32 mm, 330 mm

CNC Longitudinal Lathe Brand: Star Machine type : SR 32 / 330 Year of manufacture : 1997 Control : - FANUC 16 TCNC Control Location : Hultsfred warehouse Sweden Availability : direct from stock Technical data Max. rod diameter: 32 \[mm\] Main spindle stroke: 310 \[mm\] Main spindle stroke with driven taper: 295 \[mm\] Spindle Power: 7.5 \[kw\] Main spindle speed : 350 – 7000 \[rpm\] C axis on main spindle Number of Turning Tool Holders: 6 Number of powered tool holders: 4 Driven Tools Speed: 350-5000 \[rpm\] Number of tool holders on the combi device: 4 maxi diameter in pick-up spindle: 32 \[mm\] Spindle speed counter spindle : 350-7000 \[rpm\] Power sub-spindle: 3.7 \[kw\] Indexing C-axis sub-spindle: 1° Pick-up spindle stroke: 125 \[mm\] Electrical connected load. : Power: 20 \[kW\] Dimensions: 1700 x 2515 x 1700 \[mm\] W ...

Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm

Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible.

CNC lathe Okuma LU 3000 EX-M 2PC-600 Control: OSP-P300L Year of Make: 2017 Turning length: 600 mm Turning diameter: 340 mm Swivel diameter over bed: 580 mm Speed: 50 - 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (all places driven) B-turret: 8 tool positions Equipment / Accessories: - Chip conveyors - One Touch IGF - Tool monitoring system - Tool measuring device - Reinforced coolant pump 8 bar - 3- Baking Chuck Kitagawa B208

CNC lathe Type: GA-360 LM Manufacturer: Goodway Year: 2005 Control: Fanuc Series Oi-TC Max turning diameter: 500 mm Max turning length: 1200 mm Clamping head: 100 mm Swing over bed: 700 mm Spindle bore: 75-105 mm Chuck size: 15" LM driven tools with milling function (C-axis) Driven tool motor: 7 hp Spindle motor: 30 hp Revolver head: 12 VDI 3-jaw chuck Chip conveyor Tailstock Machine in good condition, under power Find more here - / Contact us at -

Fiber laser cutting machine Type: G 3015 MF Manufacturer: Hans Year: 2018 CNC control: Hans 701 Pro Exchange tables 3 m x 1.5 m X: 3050 mm Y: 1530 mm Z: 250 mm Laser source: IPG 3000 W Laser type: Fiber Laser head: Precitec Machine weight: 8,000 kg Max. workpiece weight: 750 kg Sheet metal cutting thickness: steel 15 mm stainless steel 10 mm aluminum 6 mm brass 5 mm Machine in good condition, under power Find more here - / Contact us at -

This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information.

CNC press brake Type: APH-S 3106×120 Manufacturer: Baykal Year: 2005 Control: Delem DA 66W (graphical 2D programming) Press force: 120 t Working length: 3100 mm Automatic calculation of the bending sequence and collision detection X-axis rear stop with 2x manually adjustable stop fingers CNC electromotoric rear stop height adjustment (R axis) CNC electrically controlled table deflection ROLLERI upper tool adapter Equipment and accessories: Front protection device (hinged door) Rear protection device (sliding door) 1× freely movable two-handed / foot control User manual including CE declaration Machine in good condition, fully functional, under power Find more here - / Contact us at -

The machine is in good technical condition, after prior agreement it is possible to test it. with Fanuc Oi-TC control and accessories. - maximum turning diameter: 500 mm - maximum turning length: 1200 mm - clamping head 100 mm - swing diameter over the bed: approx. 700 mm - max. spindle passage bar diameter: approx. (75-105 mm) - chuck size: 15" - LM driven tools with milling function (C axis), driven tool motor 7 hp - spindle motor 30 hp - number of tools in the turret 12 VDI - 3-jaw chuck - chip conveyor

Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

control: Haas Automatic : 3 Backen x-travel: 850 mm changer: 12 fach serial number: 70422 total power requirement: 22 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of construction: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O²,N²) 1 x TEKA filter system outdoor installation 1 x nesting program on the machine control Availability: immediately

Inv. Num. : 9001 Type: E-30160 Producer: DURMA Created: 2006 Parameters: Control system: DNC 60 hp Compressive force: 160 t Maximum bending length: 3050 mm Weight of the upper tool: 40 kg Reduce tool weight: 55 kg Stroke: 200 mm Machine height: 2700 mm Machine length: 4200 mm Machine width: 2100 mm Machine weight: 9820 kg

Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.

The machine is in good technical condition, after prior agreement it is possible to test it. Length: 584.2 mm Width: 457.2 mm Height: 807.7 mm Spindle head: A2-6 Weight: 7259.5 kg Turning length: 584.2 mm Turning diameter: 406.4 mm Diameter over bed: 807.7 mm X-axis travel: 317.5 mm Z-axis travel: 584.0 mm Spindle bore: 88.9 mm Number of turrets: 1 Number of tools on the turret: 24 Turning speed: 4500 rpm Spindle motor power: 14.0 kW I am selling it with an unused feeder, single-shift operation, according to the owner "almost in the condition of a new machine".

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, power board -Manufacturer: Heidenhain, power board CNC control -Type: PL 405 B -ID No.: 263 371 22 -Voltage: 24V -Quantity: 2x circuit board available -Price per piece -Dimensions: 280/230/H50 mm -Weight: 1.2 kg/pc.

Inv. Num. : 9057 Type: CTX 310 Producer: DMG MORI Created: 2004 Parameters: Control system: SINUMERIK 840 D Maximum turning length: 450 mm Max. turning diameter: 200 mm Maximum turning diameter over bed: 330 mm Maximum turning diameter over support: 260 mm Maximum length of travel in the X-axis: 160 mm Maximum feed in the Z-axis: 450 mm Maximum spindle speed: 6000 1/min Weight: 3950 kg

CPU315-2DP 321-7BH00-0AB0 321-1BL00-0AA0 322-1BL00-0AA0 353-1AH01-0AE0 353-1AH01-0AE0 331-7KB02-0AB0

A SAF oxy-fuel cutting system in a single-torch configuration without plasma is available, number of torches: 6, tool holder stroke: 150mm, rapid traverse: 15m/min, cutting speed: 4m/min, max. cutting thickness: 200mm, max. plate dimensions X/Y: approx. 2800mm/6000mm, on-site inspection is possible.

Key data: 125 t, 3020 mm, 3050 mm

Dener XF 30125 - Hydraulic CNC Press Brake - Control unit (swivel): ESA S 640 CNC 15" 2D graphic screen / touchscreen - Hydraulic brake brake valve with CE safety signals - MCS PLC Safety PLC - Laser safety system - X-axis backgauge: 500 mm (manually adjustable) - Clamping of the upper tool: L = 150 mm (Promecam) - Upper tool: Eurostamp 1260 / Standard (835 & 805 mm, divided into 595 & 210 mm) - Lower die holder: standard width (Promecam) - Lower die: Eurostamp 2067 / Standard (835 & 805 mm, divided into 100 mm left, 395 mm, 210 mm & 100 mm right) - CNC adjustable motorized crowning (V-axis) - 2 front supports, manually adjustable in height and lateral position - Switch-on time: 1184 h - Processing time: 673 h - Year of construction 2023 Technical data - Pressure: 125 t - Bending length: 3020 mm - Stand width: 3050 mm - Number of axes: 3 - Oil filling: 200 l - To ...

Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.

Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit

Control Siemens 828D - ShopTurn Rotary diameter. [mm] 405 Turning length [mm] 956 Main spindle: Lining SAMCHULLY HS-12 (12 inches) Spindle speed (max.) 3,000 rpm Spindle nose A2-8 Motor power (Cont./Max) 18.5 kW / 26 kW Max. turning Ø x turning length 405 mm x 956 mm Tool carrier (X/Z): Number of tool positions 12x BMT65 Max. milling Ø 433 mm Travel (X/Z) 245 mm / 1,040 mm Rapid traverse (X/Z) 24 m/min / 30 m/min Tailstock: Quill Ø 110 mm Quill stroke 100 mm Equipment/accessories: Control SIEMENS 828D - ShopTurn Bed construction 45° inclined bed (cast from one piece) Additional equipment Tool Probe (Tool Setter, swivel) Collision protection turret with Hirth serration Weight 5,600 kg (according to configuration nameplate) Chip Management Chip Conveyor Electrical connection 380 V / 3PH. PE / 50/60 Hz / 42 kVA

AMADA LCG 3015 AJ fiber laser was built in 2016 in Japan by Amada Co., Ltd. It is an extremely versatile machine designed for precision machining of a wide range of materials, i.e. structural steel, stainless steel, aluminium, brass and copper. It is distinguished by the use of state-of-the-art components and a robust design that maintains stability during even the most demanding challenges. The sheet metal cutting process is performed by means of fibre optic technology, which offers many advantages over traditional cutting methods. The use of this technology in production makes it possible to quickly cut complex shapes with the highest precision and accuracy. It is also distinguished by its high energy efficiency, which results in lower energy consumption and a significant reduction in operating costs. The AMADA LCG-3015 AJ is equipped with a reliable cutting head with an efficien ...

turning diameter:670 mm turning length:1540 mm control:F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover:700 mm Travel turret No.1 (milling spindle) x/y/z:495 / ± 150 / 1562(+164) mm Rotation B-axis:-30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/40 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:20,2/18,8 kW Torque of milling spindle:120 / 44 Nm tool taper milling spindle:Coromant Capto C6 Tool magazine for milling spindle (turret 1):76 Tool change time tool/tool, milling spindle:1,25 s Spindle 1 RPM:3000 1/min Spindle 1 Power:36 / 30 / 25 kW C-axis spindle 1:0,001 ° Bar capacity spindle 1:102 mm Spindle 2 RPM:4000 1/min Spindle 2 power:26 / 22 / 15 kW C-axis spindle 2:0,001 ° Bar capacity spindle 2:80 mm dimensions of the machine ca.:7,8 x 3,6 x 2,9 m Linear scales on axis:X, Y programmable steady:KLU-A530 & SLU-X3.2 Spindle 1 ...

turning diameter:1600 mm turning length:3000 mm centre height:800 mm turning diameter over bed:1600 mm turning diameter over bed slide:1400 mm turning dia. over face-slide:1200 mm max. workpiece weight between centers:20 to speeds:5,6 -800 1/min transmission ratio:3 spindle bore:112 mm turret (x-stations):8 / VDI 60 travel -x axis:850 mm travel -z axis:3020 mm rapid power traverse in X-and Z direction:6 / 10 m/min power maindrive:46 kW weight of the machine ca.:22 to. dimensions of the machine ca.:7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories

turning diameter:626 mm turning length:3000 mm Turning diameter:600 mm spindle bore:100 mm spindle turning speed range:2800 U/min weight of the machine ca.:18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device

Okuma Multus U 3000Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mmTurning length : 1000 mm____________Description:Main spindle:Technology:Motor spindleSpeed:4,200 rpmPower:22 kWTorque:427 Nmspindle bore:91 mmHollow clamping cylinder:86 mmC-axis:High precision packageChuck:SMW KNCS-N 275-86 K8Sub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:22 kWTorque:420 Nmspindle bore:80 mmHollow clamping cylinder:77 mmC-axis:High precision packageChuck:SMW BHD-FC 210-52-3Tool carrier X/Y/Z/B:Technology:Milling spindleSpeed:12.000 rpmPower:22 kWTorque:120 NmTool holder:HSK 63Y-axis:250 mm (+/- 125 mm)B-axis:240°Tool magazin:Number of stations:80Equipment:Measuring systems:Direct in X/Y/Z axis (glass scales)Chip disposal:Chip conveyorCoolant supply:IKZ system, 70 barCoolant temperature control:Deltatherm E4Chip rinsing:working area, manual gunAccuracy package:C- ...

SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Chuck:SAMCHULLY HS-12 (12 inch)Spindle Speed (Max.):3,000 RPMSpindle Nose:A2-8Motor Power (Cont./Max):18.5 kW / 26 kWMax. Turning Ø x Turning Length:405 mm x 956 mmTool Carrier (X/Z):Number of Tool Stations:12x BMT65Max. Milling Ø:433 mmTravel (X/Z):245 mm / 1,040 mmRapid Traverse (X/Z):24 m/min / 30 m/minTailstock:Quill Ø:110 mmQuill Stroke:100 mmEquipment/Accessories:Additional Equipment:Tool touch probe (Tool Setter, swiveling)Collision Protection:Turret with Hirth couplingYear of Manufacture:2023Weight:5,600 kg (according to configuration nameplate)Chip Management:Chip conveyorElectrical Connection:380 V / 3PH.PE / 50/60 Hz / 42 kVA::

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

Technical data: 2000 overtaken Turning diameter over bed: 1350 mm Turning diameter via slide: 1250 mm Sheet: 1350 mm Clamping on the flat disc: 300-900 mm Turning length: 5000/6000 mm

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

AT- Cylinder heads complete with valves in exchange for DB OM 401-444LA,MAN D2866-2V,D2566MF-2V,DEUTZ FL912,FL913,BFL913 info@miw-zeven.de

AT-Motor Scania Typ=DC/DI12 Pumpe-Düse-Motor generalüberholter Motor mit 1 Jahr Garantie 337KW. info@miw-zeven.de

AT-Motor Scania Typ=DC12 Pumpe-Düse komplett ohne Anlasser+Lichtmaschine. 1 Jahr Garantie,337KW bei 1.800 U/min.Für Notstrom+BHKW Anwendungen. info@miw-zeven.de

Alfa Laval MMB 305 Skid

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms