250 ton used for sale

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...

internal diameter:140 mm total power requirement:5,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:2,8 x 2,5 m max. workpiece weight:15 kg clamping dia. max.:140 mm clamping length:250 mm max. bore diameter to be ground:0,8-90 mm min./max. hole to grind:160 mm centre height:90 mm workpiece spindle stepless:112-1000 U/min

turning diameter:356 mm turning length:700 mm y-axis:±60 mm spindle drive:18 kW counterspindle motor:15 kW Direct drive for driven tools:5,5 kW Motor starting torque:640 Nm Main spindle mount:A2-8 counter spindle mount:A2-6 Rod passage:80 mm main spindle speeds::4.000 U/min Drehzahl angetriebene Werkzeuge :6.000 U/min rapid traverse speed:30 m/min auf X- und Z-Achse machine weight ab.:5.800 kg 12-station turret, all positions driven C-axis on both spindles Belt-driven and infinitely variable drive on all motors Prismatic guideways on all axes Oil cooler for both spindles, manufacturer Daikin Automatic, dialog-guided programming system MAPPS Automatic monitoring of tool load and tool wear Two Renishaw measuring arms for automatic tool measurement Interfaces: USB, PCMCIA card, and RS-232 port Interface for bar feeder Automatic parts catcher Dual foot pedal for independent opening and clos ...

turning diameter:x. 350 mm turning length:985 mm swing dia.:610 mm clamping range for bar work:77 mm speeds:350 - 4.000 U/min Torque:465 Nm spindle nose:A2 - 8" spindle bore diameter:88 mm chucking diameter:254 mm numbers of tools:12 travel -x axis:190 mm travel -z axis:1.025 mm rapid traverse X-axis:30 m/min rapid traverse Z-axis:33 m/min Tailstock Travel:1.010 mm tailstock taper MT:4

turning length:630 mm total power requirement:16 kW weight of the machine ca.:5 t dimensions of the machine ca.:3400 x 1500 x 1600 mm swing diameter over slide rest:Hinterdrehschlitten 250 mm centre height:über Hinterdrehschlitten 150 mm center height over bed:300 mm turning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mm accessories::2 Schränke Wechselräder

x-travel:800 mm y-travel:250 mm z-travel:350 mm table-size:1130 x 250 mm no. of flutes:4 groove width:14/25 mm taper MK:4 spindle turning speed range:56 - 2800 U/min total power requirement:9,5 kW weight of the machine ca.:2009 kg dimensions of the machine ca.:1400 x 1700 x 2800 mm Documents:vorhanden

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm

swing diameter:320 mm control:840 D SIEMENS turning speeds:5000 1/min spindle drive:20 / 27 kW chucking diameter:250 mm travel -x axis:650 mm travel -z axis:300 mm turret head:12 Pos. tool holder:VDI 40 toolpiece turning speed range:4000 1/min work piece power:max. 11,7 kW weight of the machine ca.:8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours)

swing diameter:260 mm control:840 D SIEMENS turning speeds:3.500 1/min spindle drive:36 / 28 kW chucking diameter:260 mm travel -x axis:900 mm travel -z axis:400 mm turret head:12 Pos. tool holder:VDI 40 rapid power traverse in X-and Z direction:100 / 30 m/min dimensions of the machine ca.:5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm,

x-travel:2500 mm y-travel:1000 mm z-travel:750 mm table surface area:3220 x 1000 mm Workpiece weight approx.:3000 kg spindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/min feed speeds:1- 30000 mm/min rapid traverse:30 m/min total power requirement:40 kW dimensions of the machine ca.:6,9 x 4,1 x 3,7 m weight of the machine ca.:21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders

faceplate diameter:2500 mm swing diameter:2500 mm swing diameter:2500 mm turning height:2500 mm turning speed range - faceplate:1,8 - 140 U/min workpiece weight max.:15.000 kg feeds: 0,03 - 6,3 mm/U rapid speed:2 m/min cross rail adjustment:2150 mm max. ram stroke:1500 mm power capacity:55 kW weight of the machine ca.:32 t dimensions of the machine ca.:4,1 x 7,6 x 6,0 m 1 turret head 1 RAM head

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary

Pressure:063 t throat:250 mm stroke:10 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 500 mm hole in the table:180 x 140 mm table height over floor:700 mm ram surface:360 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,8 t Dimensions (WxDxH):1,9 x 1,7 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical

nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft

pressure:250 t distance between columns:1125 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1100 x 900 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:100 mm die cushion area:700 x 400 mm table height over floor:960 mm side window:700 mm ram surface:1080 x 900 mm oil volume:1000 l power requirement:35,0 kW weight:23,0 t Dimensions (WxDxH):2,5 x 2,3 x 4,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary

pressure:250 t throat:450 mm stroke:36 - 126 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:525 mm table surface area:1000 x 750 mm hole in the table:400 x 360 mm table height over floor:1000 mm ram surface:600 x 500 mm ram adjustment:111 mm power requirement:19,0 kW weight:13,5 t Dimensions (WxDxH):1,3 x 3,2 x 3,35 m clutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric

material width:250 mm material thickness:0,4 - 3,5 mm no. of straightening rolls:9 straightening roll diameter:30 mm speed:3 - 15 m/min material thickness at 250 mm material width:3,0 mm material thickness at 200 mm material width:3,5 mm power capacity:1,8 kW weight:0,9 t Dimensions (WxDxH):1,45 x 1,4 x 1,55 m

Pressure:250 t throat:450 mm stroke:8 - 135 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:635 mm table surface area:1250 x 850 mm hole in the table:355 mm table height over floor:950 mm passage to the back:660 mm ram surface:790 x 610 mm ram adjustment:120 mm power requirement:18,5 kW weight:14,0 t Dimensions (WxDxH):1,5 x 2,8 x 3,65 m German Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 clutch:pneumatisch overload protection in ram:mechanisch ram counterbalance:pneumatisch

material width:250 mm material thickness:0,25 - 3,0 mm no. of straightening rolls:11 straightening roll diameter:30 mm speed:6 - 60 m/min power requirement:15,0 kW weight:1,1 t dimensions (WxDxH):1,1 x 1,7 x 1,5 m striaghtening pressure automatic:hydraulic coil loof control:ultrasonic

pressure:400 t distance between columns:1100 mm stroke:250 mm no. of strokes:25 - 75 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1100 x 965 mm capacity of ejector in table:30 t ejector stroke of ejector in table:80 mm capacity of ejector in ram:3 t stroke of ejector in ram:60 / 70 mm ram surface:980 x 800 mm column travel -side:800 mm ram adjustment:20 mm power capacity:80,0 + 5,5 kW weight:47,0 t Dimensions (WxDxH):3,5 x 3,3 x 6,0 m weight of switch cabinet:1,4 t dimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 m ejector in ram:hydraulic

Pressure:250 t stroke:30 mm no. of strokes:60 - 500 /min Distance between columns:1500 mm distance table/ram, max. stroke up, adjustment up:390 mm table surface area:1580 x 1100 mm hole in the table:1270 x 300 mm table height over floor:1470 mm side window:600 mm ram surface:1500 x 900 mm ram adjustment:100 mm material width:500 mm material thickness:0,5 - 1,5 mm coil weight:6,5 t coil internal diameter:420 - 560 mm coil external diameter:1500 mm power capacity:45,0 kW Weight:44,0 t Dimensions (WxDxH):3,3 x 1,8 x 4,5 m clutch:pneumatisch ram adjustment:motorisch double decoiler:LH 2-1,5-500 straightening machine:R 500 roll feed:mechanisch; Schuler, WK 8-500

pressure:063 t throat:250 mm stroke:8 - 100 mm Stroke rate:60 - 160 / min Distance table/ram, max. stroke up, adjustment up:415 mm Table surface area:710 x 500 mm Hole in the table:250 / 280 mm Table height above floor:800 mm Passage to the back:290 mm Ram surface:450 x 280 mm Ram adjustment:63 mm Weight:4,3 t Dimensions (WxDxH):1,5 x 1,7 x 2,7 m infinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical

pressure:063 t throat:250 mm stroke:8 - 100 mm Stroke rate:47 - 140 / min Distance table/ram, max. stroke up, adjustment up:415 mm Table surface area:710 x 480 mm Hole in the table:280 / 250 mm Table height above floor:800 mm Passage to the back:290 mm Ram surface:450 x 280 mm Ram adjustment:63 mm Weight:4,0 t Dimensions (WxDxH):1,5 x 1,6 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 infinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical

new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. wor ...

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle g ...

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 N ...

Size: 265 mm Impression: 2 Mio. Equipments: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Drum pliers, round profile pliers TAKRAF ZFH 025 ( ZFH025 ) 250 kg Gripping width: 370 / 630 mm used, tested ! Dimensions: 1000 x 780 x 520 mm Weight: 34 kg

Stacking tongs, box lifter, bundle clamp, gripper -Manufacturer: Müller Martini, pneumatic stacking tongs type 0277.0401 -Load load: max. 250 kg -Clamping range: 850 to 1350 mm -Quantity: 2x grippers available -Price per piece -Transport dimensions: 940/250/H530 mm -Town weight: 87 kg/pc.

Auction-ID: A1-45889-2859

3-jaw chuck, three-jaw chuck, power chuck BIAL, BISON 2404-250 outer Ø: 250 mm bolt circle Ø : 172 mm height with jaws: 167 mm max. 3000 rpm jaws individually adjustable by toothing ! New !' dimensions: 250 x 250 x 170 mm

Pneumatic cylinder NORGREN PRA/182125/W2/250 stroke: 250 mm Rod diameter: Ø 32 mm pmax: 16 bar used ! Dimensions: 710 x 225 x 160 mm

Equipped with: Hour position: 339 hours, turntable, extraction, pressure vessel, doors over the full width 1780 mm and depth 1800 mm of the cabin, with hatches in the doors for long objects; Turntable ø 1500mm, on rails, can be driven out of the cabin, external blast pot with automatic recovery (recycling system). Large size extraction, type: SO-250p, motor power: 4.0 Kw; sound attenuation on exhaust; with speed control and automatic filter cleaning; Cyclone pre-separator. including 3-fold LED lighting. The Sant-Tech PK-180 blasting cabinet set (year of construction 2020) consists of a cabin (±1.5–1.8 m wide, 0.8–1.0 m deep, 1.9–2.0 m high, ±800 kg) with 230V supply, air consumption ±12,000 l/min and working pressure 2–8 bar, combined with a ZO-250P extraction (400V, 4 kW, 4–6 bar, ±250 kg, approx. 0.8–1.0 × 0.8–1.0 × 2.0–2.3 m) and a 40-litre pressure vessel (wor ...

\" Column-mounted slewing crane Taucha CSX-D 250-5/3.2 with two electric chain hoists Demag (250 kg / 70 kg) Manufacturer: Mechanik Taucha Fördertechnik GmbH Column-mounted slewing crane from Mechanik Taucha Fördertechnik GmbH for use at assembly and machining workstations, most recently used to feed a CNC processing machine. The crane has two booms of the same length, each equipped with a Demag electric chain hoist. This means that two different load ranges can be operated at one workstation. • Main boom with Demag electric chain hoist 250 kg • Second boom with Demag electric chain hoist 70 kg The trolley travel on both booms is manual, as is the swivel movement over the column. The hoists are operated via pendant button control. Condition: used, functional. A crane inspection book in accordance with DGUV is available. Scope of delivery: • Column slewing crane with base plate ...

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

gebr. Wooden tongs / tree pliers / pipe wrench

8 piece welding pliers 1 piece welding control Manufacturer: Düring

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with 1-axle turntable steering -Platform: 1980 x 785 mm -Load capacity: 4 t -Tires: solid rubber -Dimensions: 3650/790/H505mm -Weight: 383 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 9000 kg -Chain length: 1.5 m -Weight: 40 kg

# Description text for the press If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Mold opener-closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Specifications: - Pressing force: 40 tons - Maximum open height: 1800 mm - Tappet travel: 1500 mm - Oil Temperature Monitoring: Electric Air Cooling - Lubrication: Manual via grease fitting - Extending table travel: 1200 mm - Extending table speed: 30 mm/sec - Electrically infinitely variable ram: 180 degrees - T-slots: According to customer requirements - Pressure setting: From 10 tons to 40 tons - Monitor: 10" on the control cabinet for pressure adjustment and warning ...

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3200 kg -Chain length: 1.5 m -Dimensions: 700/300/H160 mm -Weight: 22 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3200 kg -Chain length: 3.2 m -Dimensions: 700/400/H160 mm -Weight: 31 kg