250 ton used for sale

pressure: 250 t stroke: 37 mm no. of strokes: 30-240 Hub/min ram adjustment: 150 mm table surface area: 1200x1000 mm hole in the table: 500x180 mm tool hole in ram: Ø52 mm total power requirement: 50 kW weight of the machine ca.: 35 t dimensions of the machine ca.: LxBxH 3700x2300x3900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 900 mm stroke: 300 mm table surface area: 850x900 mm ram surface: 800x880 mm stroke: 300 mm table height: 1050 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Rapid, chassis drive motor faus electric stacker RVT 2500 -Drive motor::LS Leroy Somer type T15 24V 2.0 kW -Motor brake: Lenze -Individual components: see photos -Dimensions: 290/285/H700 mm -Weight: 76 kg

Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: tank capacity approx. 40 liters -Filter: RT-Filter RMS-80 -Filter capacity: 80 l/min -Level indicator: -Dimensions total: 490/250/H565 mm -Weight: 23 kg

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg

Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Manufacturer: Gumasol heavy duty roller heavy duty wheel -Wheel size: 250/80-170 -Number: 5x wheel available -Price per piece -Weight: 5.1 kg/pc.

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Rübenach, clamping plate: with support ribs on a solid base -Length: 2500mm -Width: 1500mm -Height: 835mm -Dimension: 2500/1500/H835 mm -Weight: 2440 kg

Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg

Outside micrometers, micrometer screw, outside micrometer -Manufacturer: Mahr, outside micrometer -Measuring range: 225-250mm -Reading: 0.01mm -Locking device -other sizes: also available -Dimensions box: 400/230/H30 mm -Weight: 2,2 kg

Lever gauge, dial gauge, probe, probe -Manufacturer: Rekord, dial gauge weight -Measurement range: 0 - 250 kg -Dimensions case: 160/80/H35 mm -Weight: 0.4 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 39 x 250 mm -Total length: 1265 mm / 1 x 500/400/365 mm each -Weight: 65 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 250/4 -V-belt width: 17 mm -Receptacle: Ø 100 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 260 x 82 mm -Weight: 5.8kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø56 x 22mm -Item No.: 814 682 65 -Heating power: 250 W -Voltage: 230V -Dimensions: 150/140/H60 mm -Weight: 0.3 kg

Control cabinet socket, Schuko socket -Manufacturer: Murr Elektronik, safety socket 16A / 250V -Type: 67950 -Number: 2x safety socket available -Price per piece -Dimension: 80/45/H70 mm -Weight: 0.1 kg/pc.

V-belt pulley, belt pulley -V-belt pulley: Pulley 5 grooves -V-belt width: 17 mm -Intake: Ø38 x 90 mm -Dimension: Ø250 x 135 mm -Weight: 18.3 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: 4-groove pulley 4SPB 3020 55 -V-belt width: 17 mm -Receptacle: Ø 55 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 255 x 80 mm -Weight: 14kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 250 mm -Dimensions: see drawing in the photos -Dimensions: 285/180/H280 mm -Weight: 21.6 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm -Dimensions of box: 320/320/H20 mm -Weight: 0.9 kg

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder -Type: BDG 6360-2-10-30-W126-2500-65 -Quantity: 2 encoders available -Price: per piece -Dimensions: 58/86/H70 mm -Weight: 0.3kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: BHC WEB, capacitor 1000 µF -Type: 55/085/56 LL ALS20A 102 KD 250 -Quantity: 1x contactor available -Dimension: 95/70/H110 mm -Weight: 0.3 kg

Pipe gripper, round gripper, laying tongs, round material gripper, scissor gripper, pipe laying device -Manufacturer: Siegert, round material gripper round pliers type RZ -Gripping range: 50 to 250 mm -Load capacity: 250kg -Dimension: 630/250/H450 mm -Town weight: 11 kg

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid version -Width: 2500mm -Depth: 800 mm -Height: 755mm -Quantity: 1x workbench available -Weight: 53 kg

Fire extinguisher, fire hose box, fire hose box, fire extinguisher cabinet, fire extinguisher cabinet -Fire extinguisher cabinet: wall hydrant with hose reel -Fire hose: with pipe nozzle -Number: 2x fire extinguisher cabinet available -Price per piece -Dimensions: 1175/250/H850 mm -Weight: 55 kg/piece

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 250 mm -Passage: Ø 80 mm -Clamping plate: Ø 305/60 mm -Bolt circle: Ø 280 mm -Weight: 37 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tires 2 pieces -Tire size: 250-15 RIM 7.00F-15 -Bolt circle: Ø 225 x 28 mm -Recess: Ø 175 mm -Price/Delivery: complete -Dimensions each: Ø 700 x 215 mm -Weight: 90 kg/piece

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Inside: Ø 100 mm -Hole circle: Ø180 mm/ M10 / Ø230/10 mm -Dimensions total Ø 250 x 23 mm -Weight: 6.1 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 250 mm -Passage: Ø 76 mm -Bolt circle: Ø 223 mm -Dimensions: Ø250 x 125 mm -Weight: 22 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Format, caliper caliper -Measuring range: 0-250 mm / 0-10 inches -Measurement accuracy: 0.05 mm / 1/128 In -Dimensions: 360/140/H9 mm -Weight: 0.4 kg

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, -Clamping plate: surface plate, marking plate -Size: 415 x 250 mm -Height: 60 mm -Dimensions: 415/250/H60 mm -Weight: 45 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm Type: S1-50/32x250 TGL 10906 -Piston rod: Ø 32 mm -Mounting: bolt circle Ø 120 x 14 mm -Dimensions: 425/110/H110 mm -Weight: 8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm -Type: B2-40/18x250 TGL 10906 -Piston rod: Ø 18 mm / M16 -Holes: Ø 24 mm -Dimensions: 285/75/H90 mm -Weight: 4.2 kg

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 250 mm -Groove width: 14 mm, dimensions see photo technical drawing -Dimensions: 250/56/H41 mm -Weight: 2.4 kg

Crane block, crane hook, load hook, single hook -Crane hook: Load hook load capacity 250 kg -Type: PNo 025 -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 165/105/50 mm -Own weight: 0.9 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Transport roller: Transport chassis -Load capacity: t -Dimensions: 350/250/H145 mm -Weight: 17.3 kg

Thread cutting machine, pipe thread cutter -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 935 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 250 , Generator Hz: 50 , Generator Volts: 380/440 , Generator Amps: 380/328 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6932, , = More information =, , Empty weight: 6.500 kg, Type number: B600B Generator 250 KVA

Control panel, control unit, steering, steering unit -Manufacturer: Linde, steering unit control unit from electric tractor P 250 -Individual components: see photos -Transport dimensions: 630/470/H355 mm -Weight: 16.6 kg

Gearboxes, spur gears, angle gears, worm gears, bevel gears -Manufacturer: Poggi, gearboxes, bevel gears -Shafts: Ø 24 x 50 mm -Number: 3x gearbox available -Price: per piece -Dimensions: 250/250/H86 mm -Weight: 4.9 kg/piece

faceplate diameter: 2500 mm swing diameter: 2800 mm turning height: 2200 mm table load: 15 t turning speeds: U/min Feed: mm/U digital readout: Rest: 2 Side head: total power requirement: 55 kW weight of the machine ca.: 56 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 3000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.27 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chassis, electric motor, DC motor, traction motor, drive motor order picking forklift, drive wheel electric pallet truck -Manufacturer: Linde, chassis from electric forklift R20 -Type: R20 2503 -Wheel mount: bolt circle Ø 115 mm M14 -Individual components: see photos -Dimensions: 560/460/220 mm -Weight: 36 kg

High-frequency ignition device, heating, gas and oil burners, control box, combustion control, burner control -Manufacturer: Landis & Gyr, firing control -Type: LOK16.250A27 -Dimensions: 105/105/H125 mm -Weight: 1.2 kg

Auxiliary switch, circuit breaker, fuse, line switch, circuit breaker, load break switch, terminal board -Manufacturer: wöhner, fuse switch disconnector switch disconnector -Type: QCB NH1 250A -Fuse: 3x 160A -Number: 1x load-break switch available -Dimensions total: 250/180/H115 mm -Weight: 3.0 kg

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 350 mm -Material: Steel -Dimensions: see photo -Dimensions: 350/250/H200 mm -Weight: 62.3 kg/pc.

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Belt width: 250 mm -Conveyor length: 810 mm -Drive shaft: Ø 30 x 100 mm -Dimensions: 810/560/H225 mm -Weight: 63 kg

2013 SEPARFLEX 250 A Automatic water separator Find more here - / Contact us at -