250 ton used for sale

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm

; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344

SPECIFICATIONS: Load capacity kg: 250 Chain length mm: 3500 Complete with remote control

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-250-PPSA-N3 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 610/55/H55 mm -Weight: 2.2 kg

Banding machine for folding boxes incl. inline feeding system, stacking device, PLC ELAU, type PacDrive Max-4 etc.

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 91 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Weight: 47 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston rod: Ø 38 mm -Dimensions: 168/168/575 mm -Weight: 18.4 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: ZF/hurth forklift drive HFK 250 -Wheel mounting: Dimensions see pictures -Bolt circle: Ø 270 mm M12 -Dimensions: 700/330/H285 mm -Weight: 69 kg

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

Z-roll forming machine for sheet metal of ventilation duct production max. 1.0 mm sheet thickness 2500 mm sheet width

Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11700 ( 3 ...

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: with pressure plate, stroke 250 mm -Print plate: 200 x 140 mm -Cylinder: outside Ø 90 mm -Mount: bolt circle Ø 157 mm -Number: 4x cylinders available -Price per piece -Dimensions: 605/200 / H200 mm -Weight: 40 kg / pc.

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Admission: thread, dimensions see drawing in the photos -Dimension: Ø 250 x 85 mm -Weight: 9.3 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 -Passage: Ø 76 mm -Dimensions: 300/300/H mm -Weight: 40 kg

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.

Control: SIEMENS 840D Max.turning length: 1185 mm Max swing diameter over bed/slide: 640 mm/550mm Workpiece diametr: 400/250 mm Material passage through the spindle: 65 mm Max.diameter of the material for barloader: 65 mm Rotation speed(max.) 5000 rpm Sp

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

2500 KVA Transformer Year 2009

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Hole circle: Ø 230 mm -Weight: 24 kg

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

USED TETRA PAK TBA 19 250ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-188 Category Tetra Pak TBA 19 1-TBA 19 250ml Slim Filling Machine, Year of manufactitng 1999, Version 10v, Speed 7500 PPH 2-Tetra Pak Straw Applicator TSA 46, Year of manufacturing 1997 3-Tetra Pak Cardboard Packer TCBP 70 4-Tetra Easy Ride 5-Conveyors and Paper trolly Condition: Still on production and Tetra pak maintained.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-50-250-PPV-A -Stroke travel: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm/M16x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 430/65/H65 mm -Weight: 2.4 kg/piece

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 13 mm -Dimension: Ø 250/H25 mm -Weight: 7.1 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

1 CALATOR inspection machine for open width knitted fabrics type BSM 2500, roller width 270 cm, working width 250 cm, entry small roll, exit small roll, with LABELTEX 86 type LBTX defect registration unit, with illuminated table

Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length ...

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 250 mm -Flange: Ø 310 mm / bolt circle Ø 286 mm -Hose length: 155 mm -Number: 3x nozzles available -Price per piece -Weight: 1.5 kg / pc.

Reimelt Fat Baking Plant/Berlin Plant/Doughnut Plant Type EL 8/2500 Year of construction 2008 Electric heating Manual cloth feeding 8 rows, for products up to 105mm incl. 6 trolleys with sheets and various cloths incl. downstream vaccination station with 4 jam pressure containers incl. steam hood incl. grease level regulator incl. oil tank with heater - Level regulation via weighing incl. extraction hood Bakery condition/immediately available from stock

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 250F LV429372 -Rotary drive with: extension -without: button -Dimensions: 190/105/H575 mm -Weight: 3.0 kg