250 ton used for sale

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 -Passage: Ø 76 mm -Dimensions: 300/300/H mm -Weight: 40 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD841GE Engine No.: 3008598229 Power: 254 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford Generator type: UCDI274K Gene. No.: N22E211704 Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1,200 mm Height approx. mm: 2.291 mm Length app ...

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Hole circle: Ø 230 mm -Weight: 24 kg

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016  ...

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-50-250-PPV-A -Stroke travel: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm/M16x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 430/65/H65 mm -Weight: 2.4 kg/piece

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 13 mm -Dimension: Ø 250/H25 mm -Weight: 7.1 kg

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 250 mm -Flange: Ø 310 mm / bolt circle Ø 286 mm -Hose length: 155 mm -Number: 3x nozzles available -Price per piece -Weight: 1.5 kg / pc.

Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Dematic conveyor system Roller conveyors 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Roller width (RB): 540 mm Roller pitch: 62,5-125 mm variable Drive types: none or head and center drive Weight of conveyed goods: up to 30 kg Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope o ...

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 250F LV429372 -Rotary drive with: extension -without: button -Dimensions: 190/105/H575 mm -Weight: 3.0 kg

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

turret of a Boehringer lathe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Table saw, aluminum profile saw -2x saw: Wegoma TS 250 -Fixed cutting distance: approx. 450 mm -Saws: individually or simultaneously controllable -with: foot switch -Saw blade: Ø 250 mm -Voltage: 220/380 V -Saw motor: 0.75 kW -Dimensions: 850/790/H1660 mm -Weight: 234 kg

Ref. -No.: 10142 Manufacturer: TIBO Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 232/Ø 12 mm -Dimensions: Ø 250/H26 mm -Weight: 5.6 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Ref. -No.: 10317 Manufacturer: NOSOTTI Type of control: Digitalanzeige - Mini wizard Control: Konventionell Storage location: Halberstadt Country of origin: Italy Tip length: 3000 Centre Height: 260 mm

pressure: 2500 t table length: 5200 mm table width: 2300 mm PRESS FORCES: • CAPACITY : 2500ton • Point pressure capacity: • - Upper 1600t • - Down 900ton • Slide stroke: 650mm • Slide adjustment: 225mm • Slide stroke number: continue 9~25spm • Die-height: 1250mm • Slid size(LxR ,FxB): 5400x2400mm • Bolster size(LxR, FxB, T): 5200x2300x200mm • Balance capacity: 30ton • Main motor: DC 355kw • Feed back(bolster upper side): 700,780mm • Feed back stroke : 550,700,1000mm • Cramp stroke : 0-250mm • Lift stroke: 0~150mm • Transfer inner size(cramp): 650~2200mm • Die cushion capacity • No.1 station 120ton • No.2 station 80ton • No.3 station 60ton • No.5,6,7 station: 5ton • Stroke: 200mm • Bed size: 480x1780mm • Stop time: 430ms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 170 mm -Dimensions: Ø 250/38 mm -Weight: 9 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 250 mm -Cone diameter: 140 mm -Weight: 13 kg

Ref. -No.: 10229 Manufacturer: GÖPPINGER Year of construction: 1953 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Deutschland Machine length: 4700 mm Machine width: 1450 mm Machine Height: 1300 mm Weight Of The Machine Ca.: 3,1 t Supply voltage: 380 V Turning Length: 3000 mm Turning Diameter Over Bed: 530 mm Centre Distance: 3050 mm Swing Diameter Over Bed Slide: 305 mm Spindle Bore: 58 mm Total Power Requirement: 5,5 kW Circulation in the crank: 720 mm

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Drum screening machine with conveyor technology Drum 7000 x 2500 mm, screening fine fraction and 100 x 100 mm fraction Discharge of fine fraction by means of screw conveyors Discharge of oversize particles by means of belt conveyor

Used stainless steel ribbon mixer. Capacity 250 liters. The mixer with a double ribbon agitator.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Camozzi, pneumatic cylinder type 61M2PO40A0250 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 515/60/H60 mm -Total weight: 2.5 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 250 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 30 x 393 mm -Weight: 0.5 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 250/172 mm -Height: 20 mm -Pitch circle: Ø 202/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 73x pillows available -Price: per piece -Weight: 0.5 kg/piece

Used machine for crispy cakes, pressed from roller Saixin 250. Set mixer + roller machine + electric oven belt width 250 mm.

used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 140 mm -Passage: Ø 76 mm -Weight: 30 kg

Pump, gear pump -Manufacturer: Scherzinger, pump from machining center Werner TC 2.6K -Type 250 FB / M075 / GT -Motor power: 0.75 kW -Speed: 1400 rpm -Dimensions: 420/200/190 mm -Weight: 18 kg

SPECIFICATIONS: Load capacity kg: 250 Chain length mm: 3500 Complete with remote control

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke: 250 mm -Piston rod: Ø 25 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 545/75/H75 mm -Total weight: 5.8 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 45 x 433 mm -Weight: 1.3 kg/piece

Banding machine for folding boxes incl. inline feeding system, stacking device, PLC ELAU, type PacDrive Max-4 etc.

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 250/160 mm -Height: 20 mm -Hole circle: Ø 204/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 42x pillows available -Price: per piece -Weight: 0.7 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 250/180 mm -Height: 30 mm -Number: 3x pillows available -Price: per piece -Weight: 2.2 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 250/160 mm -Height: 60 mm -Number: 2x pillows available -Price: per piece -Weight: 4.8 kg/piece