250 ton double used for sale

Hydraulic cylinder, double-acting, with position sensors HEB Hydraulik-Elementebau ZNI 250-FV-25/16/90-D/8Pb3 Piston diameter: Ø 25 mm Rod diameter: Ø 16 mm stroke: 90 mmRod thread: M12 x 1,75, length: 18 mm mounting flange: 65 x 65 mm hole spacing: 48 mm 4x Bore: Ø 9 mm 2x Position sensor: BALLUFF BES 516-300-S240-D-PU approx. 2.8 m Connection cable used, tested ! Dimensions: 260 x 90 x 75 mm

Hydraulic cylinder, double-acting PARKER CJ3LR2L14MC-M1100 NV41250903 piston diameter: Ø 63,5 mm Rod diameter: Ø 25.4 mm stroke: 250 mm p: max. 70 bar Rod thread: M20 x 1.5, length: 28 mm Flange: 118 x 76 mm hole spacing: 98 / 55 mm 4x bore: Ø 9.5 mm New ! Dimensions: 420 x 118 x 76 mm

Hydraulic cylinder, double-acting PARKER CJC2HRL24MC-M2211 NR41179701 piston diameter: Ø 38,1 mm Rod diameter: Ø 25.4 mm stroke: 250 mm p: max. 210 bar rod thread: M20 x 1.5, length: 28 mm New ! Dimensions: 470 x 64 x 64 mm

Conveyor belt, welded PAGUS 1265 x 250 mm Length: 1265 mm Belt width: 250 mm Belt height: 5 mm Surface: smooth New ! Dimensions( packaging ): 250 x 150 x 150 mm

Wall-mounted jib crane with trolley GIS Lifting capacity: 250 kg wingspan: 4000 mm Swivel range: 180 ° anchor plate: 810 x 210 mm trolley SWF 25/2F Capacity: 250 kg Lifting speed: 8 / 1,1,5 m/min chain length double: 2 m 380 V used, tested ! Dimensions(trolley): 600 x 600 x 300 mm Dimensions(swivel arm): 4200 x 810 x 300 mm

Pillar crane, jib crane, pillar jib crane MECHANICS TAUCHA 250 / 3.5 ( 250/3.5 ) Load capacity: 250 kg Projection: 3500 mm Height under arm approx.: 3200 mm total height: 4100 mm foot 600 x 600 mm ! suitable chain hoist K209, K250, K251 ! used, tested ! Transport dimensions: 4200 x 1500 x 1100 mm

Chain hoist, trolley, with rolling trolley BALKANCAR TYPE B052MP Payload: 250 kg chain length: approx. 3.0 m lifting speed: 2.4 / 8 m/min voltage: 380 V 3AC 50 Hz ca.5.0 m Control cable with bottle roller trolley for beam width: 50 - 100 mm used, tested ! Dimensions: 650 x 440 x 240 mm

Crane arm for forklift TAKRAF Type: CRANE ARM 2 Load capacity: max. 1700 / 2500 kg Stand cross-section: 130 x 200 mm Stand height: 1760 mm Boom cross-section: 130 x 160 mm Boom length: 1670 mm Mounting plate: 400 x 590 mm, material thickness: 20 mm hook eyelet: Ø 60 mm for VTA forklift trucks with a load capacity of 2.3 / 3.2 t used, tested ! Dimensions ( standing ): 1700 x 600 x 1800 mm

Bottom bottle, double-rolled, crane bottle, hook bottle DEMAG 25000 kg Single hook with safety Hoe opening: 100 mm Pulley diameter: Ø 520 mm Rope diameter: Ø approx. 35 mm used, tested ! Dimensions ( hanging ): 560 x 530 x 1150 mm Dimensions ( transport, with pallet ): 1200 x 800 x 680 mm

Bottom bottle, double roll, crane bottle, hook bottle DEMAG 25000 kg Single hook with safety Hoe opening: 100 mm Pulley diameter: Ø 640 mm Rope diameter: Ø approx. 35 mm used, tested ! Dimensions ( hanging ): 660 x 600 x 1130 mm Dimensions ( transport, with pallet ): 1200 x 800 x 810 mm

Control cabinet fan, filter fan PFANNENBERG, EBM TYPE: PF 2500 ( PF2500 ) front dimensions. 250 x 250 mm Motor : 5958 W ( 5958W ) 18 Watt 230 V AC used, tested ! Dimensions: 325 x 325 x 145 mm

Centrifugal fan, centrifugal fan, centrifugal fan HANGZHOU Airflow Electric Appliances Co.,Ltd. B2E175-063A-AA00 Fan wheel: Ø 175 mm n: 2500 / 2700 rpm ( 50 / 60 Hz ) Motor : 0,0,052 / 0,066 kW 220 V 1AC 50 / 60 Hz with capacitor 1.5 μF 500 V AC IP44 Flange diameter: Ø 182.5 mm New ! Dimensions: 200 x 200 x 140 mm

Roof fan, vertical, explosion-proof HELIOS VDD 250/4 Ex Item: 07265 / 00 Volume: max. 1280 m3/h 0,12 kW 1400 rpm 400 V 3AC 50 Hz IP45 Fan wheel diameter: Ø 250 mm Flange: 575 x 575 mm Intake opening: Ø 180 mm Output: 350 x 350 mm Control and terminal box type A21-E1-01106 200119 New ! with documents ! Dimensions: 680 x 580 x 320 mm

axial fan, axial fan, axial fan PAGUS Ø 250 mm impeller: Ø 350 mm motor: 200 / 220 V 3AC 50 / 60 Hz 0,4 A bolt circle diameter: Ø 58 mm 4x threaded hole: M4 x 0.7, depth: 5 mm approx. 3.0 m connection cable used, checked! Dimensions: 250 x 250 x 85 mm

Slot weight support rod, commercial weights, test weights PAGUS 250 g Carrier rod + 14 pcs. brass Slot weights a 250 g Accuracy: M3 diameter Ø 50 mm Dimensions: 50 x 50 x 810 mm

Stone measuring plate, (granite measuring plate), measuring table JOHANN FISCHER 2500 x 1200 x 500 mm Middle cut-out: 1150 x 425 mm with various holes with threaded insert Weight approx. 3.9 ton Dimensions: 2560 x 1260 x 500 mm

Adjustable pharyngeal gauge, pharyngeal gauge FEINMESSZEUGFABRIK SUHL 200 - 250 mm im Holzkasten used, tested ! Dial gauge unused ! Dimensions: 520 x 300 x 50 mm

Testing press, hardness tester KARL FRANK GMBH Type 530 Test force: max. 250 kg Dimensions(hardness tester): 600 x 320 x 800 mm Base cabinet with accessory compartment Dimensions(base cabinet): 650 x 410 x 700 mm used, tested, with accessories ! Dimensions: 650 x 410 x 1520 mm

Testing press, hardness tester with sorting device KARL FRANK GMBH Type 530B Test force: max. 250 kg Year of construction: 1957 Dimensions(hardness tester): 1050 x 800 x 900 mm Base cabinet with accessory compartment Dimensions(base cabinet): 650 x 410 x 700 mm used, tested ! with accessories ! Dimensions: 1050 x 800 x 1600 mm

Stone measuring plate, marking and measuring plate, hard rock plate HOMMEL Dura Working surface: 400 x 250 mm Working height: 50 mm Accuracy: 1 with protective cover used, tested ! Dimensions: 440 x 290 x 60 mm

Compression measuring device, compression tester, compression tester FAG 10 / 250 bar measuring range 1: 0 - 250 bar measuring range 2: 0 - 10 bar for petrol and diesel engines with 9 adapter screws approx. 2,0 m measuring hose 2x pressure gauge from BARBY & Kühner Untersiemau massive Aluminium housing used, tested ! Dimensions: 335 x 220 x 300 mm

Magnetic plate, permanent magnetic lathe chuck NAREX Type: PERMAG K 250 Working surface: Ø 250 mm height: 90 mm Flange ( rear ): Flange diameter: Ø 215 / 250 mm bolt circle diameter: Ø 231 mm 3x threaded hole: M10 x 1.5, depth: 15 mm used, tested ! Dimensions: 250 x 250 x 90 mm

Magnetic plate, permanent magnetic lathe chuck NAREX Type: PERMAG K 250 Working surface: Ø 250 mm height: 90 mm Flange ( rear ): Flange diameter: Ø 215 / 250 mm bolt circle diameter: Ø 231 mm 3x threaded hole: M10 x 1.5, depth: 15 mm New ! Dimensions: 250 x 250 x 90 mm

Dividing head with three-jaw chuck WMW Ø 250 mm Motor 1: Type 1213WSM2.85.08 52 - 172 V DC, 26 A Motor 2: Type MA 14 F130 - 4A 0,37 kW 220 / 380 V 3AC Three-jaw chuck: hole diameter: Ø 80 mm, not continuous ! hole depth: 70 mm flange ( dividing head ): Ø 190 mm bolt circle diameter: Ø 160 mm 4x threaded hole: M16 x 2.0, depth: approx. 20 mm center height: 240 mm hole diameter ( dividing head ): Ø 120 mm, not continuous ! used, tested ! Dimensions ( without eyebolts ): 1000 x 800 x 425 mm

3-jaw chuck, three-jaw chuck, lathe chuck PAGUS Ø 250 mm outer Ø: 250 mm height with jaws: 140 mm bore: Ø 80 mm bolt circle diameter: Ø 230 mm flange diameter: Ø 210 mm ( inside ) with chuck wrench ! used, checked! Dimensions ( lathe chuck ): 245 x 245 x 170 mm

Dividing head with 3 jaw chuck and centering point TOS DU-250 AS ( DU-250AS ) Ø 125 IU 125 M 1- 1 max 4500 rpm center height 135 mm used, tested ! Dimensions 600 x 400 x 320 mm

Clamping plate, clamping table, machine table, T-slot plate DECKEL Working area: 700 x 250 mm for KF12 plate thickness: 60 mm groove width: 12 / 21 mm used, tested ! Dimensions: 700 x 250 x 60 mm

Clamping table, clamping plate, machine table STANKO Clamping table 1100 x 250 mm groove width: 25 / 14 mm groove depth: 25 mm spare part for milling machine STANKO 6N81G ! used, tested ! Dimensions: 1100 x 280 x 100 mm

Round Dividing Table, Rotary Table, Circular Dividing Table PAGUS Ø 250 mm Table height: 98 mm Slot width: 14 / 25 mm Groove depth: 23 mm used, tested ! Dimensions: 400 x 350 x 100 mm

tilting table, clamping table, sinusoidal table PAGUS clamping area: 250 x 180 mm approx. 90° tiltable 2 grooves 10 / 18 x18 mm 1 groove 14 x 5 mm base plate: 200 x 180 mm groove in base plate: 16 x 5 mm used, tested ! Dimensions: 300 x 250 x 80 mm

Tilting table, clamping table, sinusoidal table PAGUS Clamping area: 250 x 180 mm approx. 120° tiltable 2 grooves 10 / 18 x18 mm Base plate: 250 x 180 mm Groove in base plate: 14 x 5 mm used, tested ! Dimensions: 320 x 180 x 85 mm

Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm jaw height: 80 mm wingspan: 10 - 350 mm on turntable with graduation 360° rotatable used, tested ! solid design ! Dimensions: 670 x 450 x 225 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW type: DKRD A2/8-250x3 ( DKRDA2/8-250x3 ) outer Ø: 250 mm bolt circle Ø : 224.5 mm height with jaws: 180 mm bore: Ø 51 mm Jaws individually adjustable by toothing used, checked ! Dimensions: 250 x 250 x 180 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Type: DKRF B/8-250x3 ( DKRFB/8-250x3 ) Outer Ø: 250 mm bolt circle Ø : 171.5 / 224.5 mm height with jaws: 182 mm bore: Ø 51 mm Jaws individually adjustable by toothing used, tested ! Dimensions: 250 x 250 x 190 mm

Machine vice PAGUS Jaw width: 200 mm jaw height: 60 mm Wingspan: 0...250 mm on table with graduation 360° rotatable used, tested ! Dimensions: 550 x 375 x 190 mm

Rotary table, round dividing table, circular dividing table PAGUS Ø 250 mm Table height: 115 mm slot width: 12 / 20 mm Slot depth: 22 mm Centering hole in table: Ø 23 mm A drive shaft with spline shaft profile: Ø 13 / 17 mm, 4 wedges, wedge width: 4 mm used, checked! Dimensions: 500 x 450 x 155 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Outer Ø: 250 mm bolt circle Ø : 132.5 mm height: 135 mm (without screws) bore: Ø 51 mm jaws individually adjustable by toothing ! used, checked ! without jaws ! Dimensions: 250 x 250 x 190 mm

Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm Jaw height: 80 mm Wingspan: 0 - 350 mm on turntable with graduation 360° rotatable can be clamped on both sides ! a slotted hole for fastening is damaged !; used, checked! solid design ! Dimensions: 700 x 355 x 235 mm

Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm Jaw height: 80 mm Wingspan: 0 - 350 mm on turntable with graduation 360° rotatable New ! solid design ! Dimensions: 670 x 345 x 215 mm

Machine vice WMW jaw width: 250 mm jaw height: 75 mm wingspan: 0...300 mm on table with graduation 360° rotatable used, tested ! Dimensions: 640 x 320 x 210 mm

Tool holder for threaded screw-in milling cutters POKOLM 250 16 750 SK 40 thread M16 usable length: 250 mm conical design inner coolant supply used, tested ! Dimensions: 338 x Ø 64 mm Dimensions (packed): 350 x 70 x 70 mm

Clamping device with 3-jaw chuck, three-jaw chuck RÖHM outer Ø: 250 mm height with jaws: 155 mm bore: Ø 75 mm used, tested ! Dimensions: 355 x 290 x 160 mm

Bearing block, counter bearing for milling spindle WMW, AUERBACH FU 250 x 1000 Ø 32 mm Distance spindle center - upper edge dovetail: 150 mm dovetail guide: 184 / 140 mm, height: 44 mm, width: 65 mm spare part for milling machine AUERBACH FU 250 x 1000 ! used, tested ! Dimensions: 310 x 82 x 225 mm

tilting table, clamping table, sinusoidal table PAGUS clamping surface: 250 x 180 mm table height: 82 mm approx. 80° tiltable groove width: 10 / 18 mm groove depth: 17 mm Base plate: 250 x 178 mm Mounting holes in footplate: 2x Ø 14 x 20 mm ( U-shape ), 4x Ø 12 x 14 mm ( U-shape ) used, tested ! Dimensions: 295 x 200 x 85 mm

tilting table, clamping table, sinusoidal table PAGUS clamping surface: 250 x 180 mm table height: 78 mm approx. 50° tiltable groove width: 10 / 18 mm groove depth: 17 mm Base plate: 305 x 180 mm Mounting holes in base plate: Ø 14 x 20 mm ( U-shape ) used, tested ! Dimensions: 305 x 230 x 80 mm

Round table, round dividing table, circular dividing table PAGUS Ø 250 mm Table height: 100 mm Slot width: 14 / 24 mm Groove depth: 23 mm Centering hole in table: Ø 20 mm Mounting holes in base plate: Ø 15 x 24 mm ( U-shape ) used, checked! Dimensions: 400 x 350 x 100 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW NILES outer Ø: 250 mm bore Ø:80 bolt circle: 180 mm flange: 220 mm height with jaws: 110 mm 2400 rpm with cross cone and camlock D1- 8 inch (stud M 16) 2 set of jaws (1x drill 1x rotary jaw set) 1 chuck wrench Dimensions: 250 x 250 x 195 mm

Dividing head, dividing head, dividing table, with tailstock and fixed tip TOS Type DU 250AS Center height 135 mm Tool holder (spindle ): SK 40 360° rotatable -10° - +100° tiltable diameter (clamping plate): Ø 160 mm groove width: 12 / 24 mm groove depth: 20 mm New ! Dimensions: 650 x 460 x 280 mm

Pneumatic cylinder, double-acting, with position sensors REXROTH MECMAN PNEUMATIK 523-111-032-0 stroke: 250 mm Rod diameter: Ø 12 mm pmax: 10 bar New ! Dimensions: 400 x 50 x 50 mm

Pneumatic cylinder ORSTA Pn1A 100x250 B TGL 20747/02 Piston diameter: Ø 100 mm Rod diameter: Ø 25 mm stroke: 250 mm New ! Dimensions: 510 x 125 x 125 mm