250 ton double used for sale

General SKU212T529 LocationBarneveld MakeFranken TypePTS 250 No.00625 Year of construction1990 Main Features MaterialStainless steel Capacity7200 Ltr./Hr. Specified Features - Separator Separatorcheck Capacity130 Ltr. InletDN50 Liquid outletDN50 MaterialStainless steel 1.4571 (316Ti) Information Total height1 m Weight160 kg Floorspace2,3x0,3 m Extra SpecificationsOperation pressure: -1/2 bar testing pressure: 2,6 bar operating temperature: 200 °C SeparatorsFrankenCentrifuges > SeparatorsBrand > Franken What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU035T174 LocationBarneveld MakeWaeschle TypeDK 8/250 AC No.6721/03 Year of construction1975 Main Features MaterialAluminium/Stainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve MaterialAluminium, Stainless steel 1.4305 (303) Rotary valvecheck Rotary valve for air transportBlow through rotary valve Alu Rotor diameter250mm (stainless steel) Rotor width250mm Number of locks:8 Lock sizes250x70mm Inlet220x180mm Inlet flange sizes325x275mm Outlet220x180 Outlet flange sizes325x275mm Installation height400mm With motor0,55 KW, 220/380 Volt, 1400 rpm Rotor speed33 rpm Outside bearingscheck Air purged sealingscheck Information Floorspace0,7x0,6 M Total height0,5 M Weight125kgRotating valvesWaeschleRotary valves > Rotating valvesBrand > Waeschle What you can expect from Foeth: -- Machine is in working condition -- At a reduc ...

General SKU070X400 LocationBarneveld MakeWaeschle TypeDK-250.1/8-GG No.44533/05 Year of construction1991 Material Housing materialMild steel Rotor materialMild steel Main Features MaterialMild steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve MaterialMild steel Rotary valve for air transport(1x) Rotor diameter250mm Rotor width200mm Outletdia. 70mm Outlet flange sizesdia. 135mm With motor0,55 KW, 220/380 Volt Information Floorspace0,7x0,6 M Total height0,6 M Weight175 KG Extra SpecificationsMax 60 degr CRotating valvesWaeschleRotary valves > Rotating valvesBrand > Waeschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...

General SKU396U1165 LocationBarneveld MakeGerteis Maschinen Processingeneering AG Type1-W-POLYGRAN 250/240 No.1065 Year of construction1997 Main Features MaterialStainless steel Width230 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 240 x 230 mm Sieve sizesdia. 250 x 230 mm Sieve perforation1,5 mm With hoppercheck 50 ltr. InletDia. 315mm Motor400 volt (servo motor) With variable speed drivecheck Speed20-180 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Mounted on wheelscheck rail system With switchgearcheck Weight520 kg CEcheck Floor space1,30 x 0,85 m Total height1,60 m Extra SpecificationsSpeed left and right 20-180 rpm, typical 75 rpm, rotation angle left and right 0/720 degrees, typical 270 degrees. Sieve granulatorsGerteisSieves > Sieve granulatorsBrand > Gerteis What you can expect  ...

General SKU274U477 LocationBarneveld MakeVib Tech TypeSO 219/2500-UA Year of constructionunknown Main Features MaterialStainless steel Length2950 mm Width200 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter200 mm Feeder length2950 mm Closedcheck Inlet640x330 mm Outletdia. 180 mm With vibro motor0,4 kW, 230/400 Volt, 1460rpm (2x) Information Mounted on framecheck Floorspace2,8x0,8 m Total height1,8 m Weight600 kgVibro feedersVib TechConveying systems > Vibro feedersBrand > Vib Tech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU200W913 LocationBarneveld MakeInotec Year of constructionUnknown Main Features MaterialStainless steel Volume250 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity250 l Vessel sizesDia. 500x1600 mm Dished topcheck Dished bottomcheck Top connectionscheck OutletDN15 Information Mounted on legscheck Floorspace0,70x0,70 m Total height2,50 m Weight140 kg Extra SpecificationsWith pressure meterVertical tanksInotecTanks > Vertical tanksBrand > Inotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU200W912 LocationBarneveld MakeInotec Year of construction2018 Main Features MaterialStainless steel Volume250 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity250 l Vessel sizes⌀ 500x1600 mm Dished topcheck Dished bottomcheck Top connectionscheck OutletDN15 Information Mounted on legscheck Floorspace0,70x0,70 m Total height2,50 m Weight140 kgVertical tanksIntotecTanks > Vertical tanksBrand > Intotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU418W1323 LocationBarneveld MakeGab Neumann TypeG3-400/250/80-4/10-D No.15754-12721 Year of construction1985 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface2.48 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface2.48 m² Tube capacity17 l. Max. temperature-30°C/+80°C Shell capacity17 l. Shell diameter500 mm Shell length615 mm Max. temperature-30°C/+180°C Shell connections2x dia. DN50, Information Total height1,50 m Weight340 kg Floorspace0,70x0,70 m Technical specs Extra informationVolume 17 l., allowable pressure-1/+3 bar, allowable temperature-30°C/+180°CShell and tube heat exc ...

General SKU328W698 LocationBarneveld MakeLoedige TypeMGT-250 Mach.No.16.141 Main Features MaterialStainless steel Volume250 Ltr. Motor22 KW Specified Features - Universal mixer Universal mixercheck Capacity250 l., (210 l.) Vessel sizes⌀ 785 x 500 mm With covercheck Inlet785 mm Pneumatic operated outletcheck Outlet⌀ 200 mm With motor22 kW, 400 V, 1460 rpm, (Ex) Rotor speed30-300 rpm With lump breakercheck With motor4.7 kW, 400 V, 1450 rpm Rotor speed1450 rpm MaterialStainless steel 1.4404 (316L) Information Year of construction2008 CEcheck Floorspace2,50x1,30 m Total height2,36 m Weight1900 kg ATEX compatiblecheck Extra Specificationscheck Suitable for mixing under Nitrogen. Mixing granulator for pharmaceutical products, cosmetics and food. GMP-compliant design. Modular WIP system for the machine and all additional components. : Universal mixersLoed ...

General SKU345S1101 LocationBarneveld MakeKresta TypeVorlagebehalter No.94146-3 Year of construction1994 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume250 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel Notified bodyTÜV Capacity250 Ltr. Vessel sizesdia. 750x1142 mm Dished topcheck Top connectionsDN150, DN100, DN80 (3x), DN50 (2x) OutletDN80, DN50 Max. temperature-25/40 °C With jacketcheck (20 Ltr.) Max. temperature-25/40 °C Information Mounted on legscheck Weight250 kg Floorspace1,1x1,1 m Total height2,2 mPressure vesselsKrestaTanks > Pressure vesselsBrand > Kresta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any des ...

General SKU345S1058 LocationBarneveld MakeKresta TypePufferbehalter No.94071-3 Year of construction1994 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity250 l Vessel sizes700 x 1000 mm Dished topcheck Dished bottomcheck ManholeDN150 (inspection lid) Top connectionsDN50 (3x), DN25 Outletdia. 45 mm Max. temperature-10/100 °C Information Mounted on legscheck Weight250 kg Floorspace0,75x0,7 m Total height1,9 mPressure vesselsKrestaTanks > Pressure vesselsBrand > Kresta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKU355W952 LocationBarneveld MakeVollrath TypeVRG-10 No.26241 Year of construction2015 Main Features MaterialMild steel Volume2500 Ltr. Motor7.5 KW Specified Features - Stirring vessel MaterialMild steel Closed stirring vesselcheck Capacity2500 l. Vessel sizesDia. 1330x1750 mm Slope bottomcheck Flat top sidecheck ManholeDN500 Top connectionscheck OutletDN50 with valve With anchor stirrercheck Motor7,5 kW, 400 volt, 1470 rpm Speed mixing shaft14,8 rpm Information Mounted on legscheck Weight2000 kg Floorspace1,70x1,70 m Total height3,30 mStirring vesselsVollrathStirring vessels > Stirring vesselsBrand > Vollrath What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us  ...

General SKU404U1220 LocationBarneveld MakeAlbi Alois Binderberger No.1634 Year of construction1999 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor ReactorBioreactor Capacity2500 Ltr. (max. 3400 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature130 °C With propellor stirrercheck (magnetic) Motor1.1 kW Speed mixing shaft1400 rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Floorspace1,85x1,85 m Total height2 m Weight1350 kgStainless Steel ReactorsAlbi Alois BinderbergerReactors > Stainless Steel ReactorsBrand > Albi Alois Binderber ...

General SKU404U1229 LocationBarneveld MakeLudwig Edel No.85 250/1 Year of construction1986 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor ReactorBioreactor Capacity2500 Ltr. (max. 3500 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature-5 °C With propellor stirrercheck (magnetic) Motor1,1 kW Speed mixing shaft1400 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck Floorspace1,84x1,84 m Total height2,22 m Weight1310 kgStainless Steel ReactorsAlbi Alois BinderbergerReactors > Stainless Steel ReactorsBrand > Albi Alois Binderberger What you c ...

General SKU408S982 LocationBarneveld MakeLoedige TypeMGT250P/1MZ Mach.No.10 297 Main Features MaterialStainless steel Volume250 Ltr. Motor10 KW Specified Features - Universal mixer Universal mixercheck Capacity250 Ltr. (nett. 220 Ltr.) Vessel sizesdia. 790x510 mm With covercheck Inletdia. 790 mm, DN 150 (2x) Pneumatic operated outletcheck OutletDN 150 With motor9/10,5 kW 380V (Ex) With variable speed drivefrequency regulator Rotor speed1500/3000 rpm. MaterialStainless steel Information Year of construction1982 Mounted on framecheck With switchcheck With switchgearcheck Floorspace2,1x1,1 M Total height2,5 M Weight1400 Kg ATEX compatiblecheck Extra SpecificationsWith a platform with dimensions: 1400x900x1680 mm Universal mixersLoedigeMixers > Universal mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...

General SKU315U727 LocationBarneveld MakeSklenar TypeDKS-250 A No.20-18-025/21-0100000-00 Year of construction2018 Main Features MaterialStainless steel Motor2.2 KW Width300 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Sieve sizes350 mm Sieve perforation5 mm With hopper515x480 mm Inlet490x330 mm OutletDia. 300mm Motor2,2 kW, 230/400 volt With extra sieves3x 2-10 mm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight250 kg CEcheck Floor space0,79x1,19 m Total height1,4 mSieve granulatorsSklenarSieves > Sieve granulatorsBrand > Sklenar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

General SKU397X1090 LocationBarneveld MakeLauda TypeSUK 250W Mach.No.B 13008 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity9 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity9 kW With coolingcheck (Water) Capacity13 kW at +20 °C Temperature-25/80 °C With pumpcheck Capacity2 m³/h Motorcheck With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck Total height1,92 m CEcheck Floorspace1,63 x 0,78 m Weight800 kg Extra Specifications Connections (outflow/return): :Flanges DN25: PN16: DIN 2633 Compressor: Semi-hermetic reciprocating compressor Delivering pump: Sterling SIHI Filling capacity: approx. 60 L Refrigerant: R 404 A Filling volume: 6 kg  ...

General SKU397X1086 LocationBarneveld MakeLauda TypeSUK 250 W Mach.No.B 13009 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity9 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity9 kW With coolingcheck (Water) Capacity13 kW at +20 °C Temperature-25/120 °C Tank capacity60 Ltr. With pumpcheck Capacity2 m³/h With controlcheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck With switchgearcheck Total height1,92 m CEcheck Floorspace0,78 x 1,63 m Weight850 kg Extra Specifications Compressor: Semi-hermetic reciprocating compressor Delivering pump: Sterling SIHI Filling capacity: approx. 60 L Refrigerant: R 404 A Refrigerant filling volume: 6 kg (approx. 5–7 L) Connections (outflow/return) ...

General SKU397X1165 LocationBarneveld MakeLauda TypeSUK 250 W Mach.No.HKS10 047 Pressure Working pressure shell10 Bar Working pressure tubes16 Bar Main Features Heating (medium)Oil Capacity18 KW Temp.200 °C Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4306 (304L) Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity18 kW Electric capacity18 kW With coolingcheck Capacity10 kW at –20 °C Temperature-30/175 °C Tank capacity50 Ltr. With pumpcheck Capacitymax. 15 m³/h Motor5,5 kW With temperature controllercheck (PID controller (LAUDA SR 600) as is) Information Year of construction2010 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace0,78 x 2 m Weight1300 kg Extra SpecificationsGeneral Design Power supply: 400 V / 3 Ph / PE / 50 Hz Power consumpti ...

Eccentric press PEE I 250, in working conditon.

Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004) Clamping force: 250 t Tie-bar spacing: 630 × 630 mm Platen size: 900 × 900 mm Mold height (Min / Max): 300 – 700 mm Maximum daylight (open space): 1,300 mm Opening stroke: 600 mm Ejector stroke: 225 mm Ejector force: 86 kN Screw diameter: 55 mm Shot volume: 558 cm³ Injection pressure: ~2,380 bar Number of heating zones: 12 Control system: Selogica Machine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H) Machine weight:  14,000 kg Installed power / electricity: ~68 kW Robot / automation interface: Euromap 2500‑1300 Core pullers: hydraulic

Manufacturer: KOCH Model: BL 2500 NC select line Year of Manufacture: 2019 Type of Machine : Automatic Drilling Machine FEATURES • Magazine loading system • Clamping table for frame parts • 3 horizontal longitudinal drilling units (from the rear) • 4 vertical drilling units (from above) • Manual workpiece insertion possible • Work cycle activation via dual-hand controls • Positioning control with KOCH NUMERIC Basic 1 • Beckhoff C6920 Industrial PC control • 15" touch panel with English interface • Software prepared for online connection WORKPIECE DIMENSIONS • Length: 150 – 2500 mm • Width: 20 – 300 mm • Thickness: 10 – 50 mm • Material: Solid wood MAGAZINE LOADING • Workpiece return function • Driven by two parallel controlled servomotors • Capacity depends on workpiece weight CLAMPING TABLE • For frame parts • 3 suppo ...

turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm Number of working hours: 19.552 h Cutting time: 10.704 h spindle drive: 18,5 kW total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1100 mm tank diameter / tank height: 1000 / 400 mm turning speed range: U/min voltage: 380 V power requirement: kW volumn: 250 Liter weight of the machine ca.: 950 kg dimensions: 1,5 x 1,5 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4roll plate bending machine 2500 X 12 mm with central support hydraulic for large diameters and side arm plate support Capacity plate width 2500 mm Plate thickness 12 mm Prebend 10 mm Upper roll 265 mm Lower rolls 245 mm Surface useful on rolls 2550 mm Power supply 380/50 Electric motor 15 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the rollers Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Central support vertical hydraulic operated for large diameters Side arm operated hydraulic support Total weight of the machine 7500 Kg Total weight of the machine 7500 Kg machine layout 4200X15 ...

x-travel: 820/850 mm y-travel: 300/330 mm z-travel: 485/505 mm weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1670 x 1620 x 2500 m Further techniscal detals please consider pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens Dome Transformer 25 MVA 10.5KV/20KV immediately available and ready for use For more information, see nameplate Best regards, Markus Schmidt M&S Export

Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/202, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/268, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

sheet width: 2500 mm plate thickness: 4 mm distance between columns: . mm Control: rear stop: The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2500 mm gear width: 980 mm max. module: 34 min. module: 2 grinding stroke stepless adjustable: 1000 mm root circle dia. min.: 180 mm number of teeth: frei wählbar max.helical angle: 0 - 35 ° grinding slide stroke: 20 / 200 U/mm grinding wheel peripheral speeds:: 35 / 45 m/s grinding wheel diameter: 340 / 435 mm grinding motor: 22 kW pressure angle: 12,5 - 30 ° table diameter: 1300 mm table load capacity: 10000 kp table bore diameter: 300 mm depth of hole: 300 mm roll feed: 0 - 1000 m/min table diameter: 1300 mm workpiece weight: 10000 kg clamping length: 2760 mm clamping height: 420 - 590 mm table bore diameter: 280 mm depth of hole: 300 mm Control: BWO H+K CNC 785 total power requirement: 79 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: 7,3 x 7,9 x 4,5 m - 10 axis CNC control BWO H+K CNC 785 (2nd Generation from 2009) - integrated measurement ...

Engine Brand: OLYMPIAN, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 220 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 250 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 361 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/olympian-geh250-generator-250k va-used/357, , = More information =, , Empty weight: 2.500 kg, Type number: GEH250 GENERATOR 250KVA

Manni 2500×1300 Shelf Press Shelf length 2500mm Shelf width 1300mm Press on 4 cylinders Shelves heated with CO water

CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp H ...

Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard materials. Workpieces are mounted vertically. Accessories:, Total enclosure, External PC incl. CAD/CAM and ExLevel Pro software, Software package with additional functions for metalworking tools,, Wheelchanger for up to 6 eroding/grinding discs,, Adaptation to A-axis on HSK 63-A-E, Coolant system with pump & cooling unit, Automatic central lubrication, Automatic fire extinguishing system, Automatic shut-off flap, Glass scales on the X, Y & Z linear axes,, Mechanical mist separators N280,, 3 grinding wheel change elements, Test mandrel HSK63A., Also available with workpiece magazine as an option!, Workpiece outer diameter: max. 320 mm, Tool outer diameter: Max. 200 mm, workpiece length: max. 250 mm, Bore diameter: Max. 60 mm, Travel path X1: 520 mm, Travel path Y1: 970  ...

Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces are mounted vertically (suspended). Accessories: Total enclosure,, Software for woodworking tools, Software for P-system peeling cutters, Software for scoring saws/radius cutters, Software for 360° path programme, Software for 360° peeling cutters, Workpiece magazine N250 (pallet magazine for max. 28 workpieces),, Disc changer for up to 6 eroding/grinding discs,, Adaptation to A-axis on HSK 63- F,, Coolant system with pump & cooling unit, Automatic central lubrication, Automatic fire extinguishing system, Automatic shut-off flap, Gripper fingers for workpiece automation,, 4 workpiece holders for workpiece magazine,, 1 exchange element with flushing kit,, Mechanical mist separator N183,, Test mandrel HSK63F., Maximum workpiece outer d ...

turning diameter: max. 356 mm turning length: 705 mm control: M730 UM Mapps CELOS greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 80 (91) mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm C-Axis: 0,001 ° axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1 power capacity - driven tools: 5,5 / 4,2 kW total power requirement: 41 kVA weight of the machine c ...

Used granulator made by Matador. The device is used for grinding materials. It can be useful in various industrial applications. Capacity 3t/h. Conditioner included. 2 units available: 250 and 315 kW.

Injection Molding Machine Specifications 1. Main Machine Parameters Clamping force: 25 t Tool clamping system: 25 / ... Tool plate dimensions: 400 × 400 mm Clearance between columns: 220 × 220 mm Maximum Plate Distance: 425mm Ejector stroke: 95 mm Ejector force: 18 kN Year of manufacture: 2001 Weight: 2000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m 2. Injection Unit Injection Unit: ... / 60 Screw diameter: 18 mm Injection volume: 20cc Injection weight: 18 g Specific injection pressure: 2500 bar Screw L/D ratio: 24.5 3. Controls Control System: Selogica

Key data: 250 t, 100 mm

Heavy-duty cylinder with two-stage pump Type SB -2504 - RO Series 365 Pressure 250 ton

bore capacity in steel (diameter): 25 mm throat: 270 mm bore stroke: 130 mm taper MK: 3 MK table-size: 500 x 350 mm feeds: mm/U turning speeds: 100 - 2750 U/min connected load frequency: 400 V total power requirement: 1,1 KW weight of the machine ca.: 0,22 t dimensions: 0,8 x 0,6 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: servomechanic   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 70 mm   stroke rate (max.): 140 /min COUNTER RAM   nominal force: 80 to   stroke: 25 mm V-RING   nominal force: 125 to   stroke: 25 mm TOOL DIMENSIONS   lower table (left-right): 600 mm   lower table (front-back): 600 mm   upper table (left-right): 600 mm   upper table (front-back): 600 mm   shut height max.: 386 mm   ram adjustment: 125 mm COIL CHAIR   coil weight max.: 5 to DECOILER   design: single reel   sheet width max.: 500 mm   coil weight max.: 5 to LEVELLER UNIT  &nb ...

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement.

CONTROLS   electronic controls SIEMENS S7 300 PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES   total force (nominal): 250 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 1100 mm   height above floor level: 1105 mm   opening in bed (left-right): 1700 mm   opening in bed (front-back): 305 mm SLIDE   table surface (left-right): 2080 mm   table surface (front-back): 1000 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke adjustment: yes   stroke min.: 20 mm   stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS  & ...

CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Drive power driven tools kW: 5.5 / 3.7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11 Equipment Chip conveyor Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Sales stand/snack bar/container Year of manufacture not known incl. various equipment Dimensions: Length 3500mm Width 2400mm Height 2600mm Weight approx. 2500kg - The equipment and the container have not been cleaned or tested.

Emulsifier Karl Schnell Type: 250 Voltage: 400V / 50Hz Dimensions: 160x130x190cm

Control Siemens 828D - ShopTurn Rotary diameter. [mm] 360 Turning length [mm] 520 Main spindle: Belt spindle technology Speed 3,500 rpm Power (max.) 33.6 kW Torque (max.) 515 Nm Bar passage 67 mm Workpiece Clamping 3-Jaw Chuck, Samchully MH-208 BVI Sub-spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 8.1 kW Torque (max.) 68 Nm Workpiece Clamping 3-Jaw Chuck, Samchully HS-06VI Travel in W 565 mm Rapid traverse in B 24 m/min Tool carrier (X/Y/Z): Technology Turret with 12 stations Tool holder BMT65 Tool drive 5,000 rpm, 9.3 kW, 44 Nm Travel in X/Y/Z 235/100/580 mm Rapid traverse in X/Y/Z 18/12/24 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant management IKZ pump with oil skimmer and high pressure, 10 bar Tool Measurement Automatic Measuring Arm, Marposs T18 Raw material feed interface bar feeder prepared Precast Remova ...