250 ton double used for sale

1. Speed: 1,000- 1300ctns/hr 2. Model: CFL-2500TB 3. Carton Size: L: 200 mm W:200mm to 500mm H: 160mm to500mm 4. Machine dimension: L: 1000 mm W: 900 mm H: 1375 mm 5. Tape width: 48mm; Tail: 50mm 6. Machine weight: 126kg 7. Power: 1 phase 240V, 50/60Hz

Injection moulding machine Demag erg. 250/560 840 BJ 2001

Used manual batch ultrafiltration line for cottage cheese made by Agros Milko-Polska. Capacity: 2.500 kg of finished product in 8 hours, concentrated to 72% dry matter. New: 1996

4. Specifications Item Unit OGM-250UDX Capacity Swing diameter over table mm 220 Distance between centers mm 500 Max. workpiece diameter mm 200 Max. workpiece weight kg 60 (center of workpiece) Grinding wheel Outer diameter x width x bore mm  305x25x  127 Rotational speed (by changing the belt) min-1 2357 / 2087 Max. peripheral speed m/min 2000 Grinding headstock X-axis travel mm 203 Angle of inclination degrees + 30o Min. travel increment mm  0.001 Feed value with hand wheel mm/min  2 per revolution of the wheel Table Z-axis travel mm 640 Angle of inclination degrees 4 to 9 Feed rate with hand wheel mm 7.5 per wheel revolution Automatic feed rate mm/min 50 to 4000 Head Workpiece Spindle type - Spindle for combination of non-rotating- rotating Morse taper No. 3 Spindle through hole diameter mm  17.5 Spindle speed min-1 10-500 Angle of inclina ...

BANDERA BLOWN FILM EXTRUDER, for PE, Bandera extruder with screw diam.90 mm., 250 mm die diam. on original Bandera head, reconditioned (not the one in photo), a.c. drive with inverter, calibrator, haul off unit, corona treatment, single color small printing group, single winding station with manual discharge 1.200 mm., good overall conditions, availability: immediate, working width: 1.200 mm., conditions: good

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Inv. Num. : 8712 Type: RUR 2500 GP Producer: Pierce Created: 2007 Parameters: Work table length: 6000 mm Work table width: 2000 mm Track size: 8000 x 2500 mm Plasma Source: Cebora CP200 Autogenous: Harris Maximum sheet thickness (plasma): 20 mm Maximum sheet thickness (oxy-fuel): 200 mm Positioning speed: 12000 mm/min Equipment: Wrykrys Program Nesting USB stick

Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

turning diameter over bed: 500 mm turning diameter over slide rest: 310 mm turning length: 3000 mm turning diameter in the gap: 750 mm centre height: 250 mm turning speeds: 20-1000 U/min no. of turning speeds: 18 spindle bore: 56 mm longitudinal feed: 0,045-1,09 mm/U face feed: 0,025-0,625 mm/U number of feeds: 55 total power requirement: 4 kW weight of the machine ca.: 2,37 t dimensions of the machine ca.: 4,9 x 1,1 x 1,3 m Machine still in the delivery factory: Electric 380 Volt: chuck: Forkard 315 mm Tool holder system Multifix: Typ C Taper turning device: Chip protect bonnet: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

H&C Fours ETG 250°C Max temperature: 250 °C Capacity: 2000 x 2000 x 2200 mm Power needed: 6.5 kW Voltage: 400V

turning diameter: max. 300 mm turning length: max. ca. 550 mm control: PC Fusion CNC 640 T standard turning dia.: 276 mm swing diameter: max. 525 mm Distance Spindlenose - turret face: 115 - 690 mm Main spindle:: turning speed range - main spindle: 35 - 4.000 min/-1 power capacity - main spindel: 22 kW max. Torque: 351 Nm spindle nose: A2-6 spindle bore: 76 mm max. usable bar diameter: 64 mm chucking diameter: max. 250 mm C-Axis: 360 ° turret:: number of toolpositions: 12 pos. tool taper: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm turret change time: 0,2 / 0,6 sec. Tool Drive:: Spindle speed - driven tool pos.: 25 - 4.500 min -1 power capacity - driven tool pos.: 3,7 kW max. Torque: 35 Nm Subspindle:: Spindle speed range subspindle: 35 - 4.000 min/-1 power capacity - Sub spindle: 7,5 kW max. Torque: 57 Nm chucking diameter: max. 150 mm axis stroke:: x-axis: 190 (185 + ...

Injection moulding machine Stork N-2500-1400 Injection unit: Spray pressure (max.) 2100 bar Spray volume (max.) 595 cc Injection weight hp (max.) 565 g Spraying speed (max) 299 cc/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the bars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control)  ...

spindle diameter: 250 mm x-travel: 12000 mm y-travel: 5850 mm z-travel: 1600 mm w-axis: 2000 mm Control: Siemens type: 840 D Powerline turning speeds: 875 U/min dimension of the ram: 540x560 mm coolant: 1800 l chip conveyor: total power requirement: kW weight of the machine ca.: 130 t Overhaul of the machine 2010 Spindle mount SK 60/50 with adapter Traversing speed: Axis X/Y: 9,000 mm/min. Travel speed: Z/W axis 4,000 mm / min. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on ou ...

Presse à injecter ARBURG 100 T type 420C 1000-250 Année de fabrication : 1999 En bon état de fonctionnement Pompe neuve Force de fermeture : 1000 KN / 100 T Diamètre vis : 40 mm Volume injectable : 188 cm3 Pression d’injection : 1530 bars Rapport L/D : 18 Ouverture max des plateaux : 750 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 570 x 570 mm Entre colonnes : 420 x 420 mm Dimensions : 4,15 x 1,60 x 2,02 m

x-axis: 675 mm z-axis: 1530 mm y-axis: 300 mm control: CELOS ERGOline turning speed range - main spindle: 4000 min/-1 spindle passage: 91 mm spindle motor: 18,5 / 15 kW speed range - counter spindle: 4000 min/-1 : 76 tool length - max.: 400 mm tool diameter: 130 mm no. of tools in turret 1: 12 milling head speed: 12000 U/min milling spindle - taper: Capto C6 milling spindle drive: 22 kW total power requirement: 88 kVA total wight: 18,2 t dimensions of the machine ca.: - m Equipped with: - CELOS ERGOline CNC control - Main and counter spindle with 4000 rpm, 91 mm passage - Kitagawa 304 mm chuck - Milling spindle with Capto C6 and 12,000 rpm, 22 kW - 76-position tool changer - Counter spindle with tailstock function - Manual tool presetter - High-pressure coolant system / IKZ 70 bar - Coolant gun - Chip conveyor - Oil skimmer - Oil separator - Renishaw Power On: 17700h, Machining: 7200h  ...

Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible.

Rühle Frozen Meat Slicer Type GFR 450 / 250 CW 5.5 Cross cutter 4 pieces

Web handling system with web guide, web cleaning, and corona treatment unit 1 screen printing unit (semi-rotary) 5 offset printing units (semi-rotary) 1 hot foil stamping unit (semi-rotary) 1 additional screen printing unit (semi-rotary) 1 embossing unit (flatbed) 1 flatbed die-cutting unit Matrix stripping and dual rewinding system Upgrade: In 2008, the flatbed embossing unit was added A complete overhaul was carried out in 2017, including full mechanical and electronic refurbishment. Replacement and upgrade of the control system to Version 3

x-travel: --- mm y-travel: --- mm z-travel: --- mm Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: --- mm y-travel: --- mm z-travel: --- mm Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Working hours : 134.000 h

Demag Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 2.5 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

2 KEER OP VOORRAAD Capacity: 250 kg

max. workpiece diameter: 500 mm threading length: 5000 mm max. module: 10 min. module: 2 workpiece dia. over saddle: 250 mm center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece spindle bore: 102 mm thread pitch: 1 - 800 mm speed of workpiece (milling): 0,0034 - 2,65 U/min feeds - longitudinal: 0,256 - 195 mm/min feeds - rolls: 0,0256 - 5,17 mm/WU hob turning speeds: 45 - 900 U/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 8,5 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 7,0 x 1,7 x 1,6 m Thread-, Worm-,gear shafts- and Spline Milling Machine with : equipped with: - Thread Milling Head ApGs - Counter Stay - 1 Bush Rest - 2 Steadies - Cabinet with change Gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 380 mm turning length: 1000 mm swing dia.: 695 mm X-Axis movement: 234 mm Y-Axis movement: 100 mm Z-Axis movement: 1090 mm Minimum indexing C-Axis main Spindle: 0,0001 ° Number of tools on turret: 12 Number of driven tools: 12 x Spindle speed driven tools: 5000 1/min Spindle motor driven tools: 5,5 / 3,7 kW Tool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 4000 1/min spindle motor: 26 / 22 kW spindle bore diameter: 80 mm 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW spindle bore: 80 mm spindle distance: 1005 mm total power requirement: 43 kVA Weight: 6,65 t dimensions of the machine ca.: 5,6 x 1,95 x 1,9 m - Mazatrol SmoothG CNC control - Main and counter spindle - 12-station tool turret with driven tools and Y-axis - 3-jaw chuck -- Main: 10 -- Counter: 6 - Chip conveyor - Coolant system - Extraction syst ...

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS&FREUDENBERG Name: Dewatering screening machine Type: "Roberg" 1000/2500/1 Year of manufacture: unknown Screen length: 1,000 mm Screen width: 2,500 mm

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour frame: Ral 5015 blue Material colour half-timbering: sendz. galvanized Frame profile: PLFB 30 Profile dimensions: P 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,250 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

NEW, felling grab JAK 250 (up to 25 cm), for 5 - 11.5 t excavators,

NEW, 240 cm width, 1.01 m³ capacity, with Manitou attachment, 351 kg dead weight, with 11 teeth

NEW, 250 cm width, 1.05 m³ capacity, with Kramer / Claas Scorpion mount, 364 kg net weight

NEW, width 200 cm, 396 kg net weight, 0.98 m³ capacity, with Komatsu mount

Key data: 380 mm, 1000 mm, 4000 1/min

Stock number: 3961 CNC LATHE Manufacturer: MAZAK, Type: QTN 250-1000L Year of Make: 2004 Specifications: Max. circumferential diameter 380 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1032 mm Main motor power 26 kw Main spindle speed range 4000 rpm Hole through drawing pipe 80 mm dia. X axis movement 230 mm Z ash movement 1000 mm Tool turret with 12 stations Total power consumption 50 kva Control 640 T Nexus Fabr. Spindle Hours 6091 Hours Controlled in X-Z axes Accessories: Hydraulic Main Center Chuck Kitagawa B-212 15X (300mm) mm dia. Various tools pcs. Tool setter Chip conveyance. Length: 3550 mm, Height: 1870 mm, Width: 2000 mm, Weight: 5200 kg

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.

Safan 2500 x 3 mm Cutting length: 2500 mm Max sheet thickness st 45: 3 mm Max sheet thickness inox: 2 mm

Offer 25369 Specifications: - Max. load capacity with full ballast approx. 250 kg - 4 Vacuum Glass Suction Cups 200 mm - Lifting height in the middle of the top suction cup up to approx. 2.5 m - Separate height adjustment + twisting device - min. construction height approx. 1285 mm - max. overall height approx. 2720 mm - max. total length approx. 2100 mm - min. width approx. 620 mm - Net weight depending on ballast approx. 260 to 410 kg - Charger 220 V - Battery 12 V -Operating instructions

Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2008 en verkeert in gebruikte, maar goede staat. Merk: SICA S.p.A Bwj Ud Dotpg Avovycow Type: TRS/SY 32-250 C 2000 Serienummer: 0817501 Bouwjaar: 2008 Spanning: 400 V Vermogen: 6 kW Buisdiameter max. 32 - 250 Ø (mm)

A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

General SKU209W100 LocationBarneveld MakeDiessel No.95 18 2134 Year of construction1995 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume250 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Capacity343 Ltr. (netto 250 Ltr.) Vessel sizesDia. 742x800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outletcheck25 mm Max. temperature150°C Information Mounted on legscheck wheels Floorspace1,0x0,85 m Total height1,75 m Weight180 kgPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ...

Type: TGL 12.250 Identification number: WMAN14ZZ8LY403440 Last official. Registration number: BKS-HO 66 Drive type: Diesel Emission class: Euro VI;CM,N Power/displacement: 184 kW/6871 ccm Registration date: 22.11.2019 Technical inspection: 08/2025 Mileage according to counter: 89396 Remarks: Condition - very good

General SKU316W638 LocationBarneveld MakeBecker TypeVTLF 250 Mach.No.1408323 Pressure Working pressure0.8 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel Pumpcheck Number of pumps:1 Capacity250 m3/h With motor5,5 kW (400 V, 950 rpm) Inletø 55 mm Outletø 60 mm Information Year of construction1996 CEcheck Floorspace1,10 x 0,65 m Total height0,70 mVacuum pumpsBecker Vacuum PumpsPumps > Vacuum pumpsBrand > Becker Vacuum Pumps What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!