250 t used for sale

A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997

Tube laser Bodor T230 Laser power: 1 kW Round tubes 20 mm to 230 mm Square tubes 20 x 20 mm to 160 x 160 mm Cutting of welded assemblies Year of construction 2017, but installed and put into operation in 2018

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

Used tank, Capacity:1000 Liter, 2 identical units available; Gross weight [kg]: 150

Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600

Slotting machine TOS HOV63

10 Stations Collator, Delivery Year: ca. 1985

USED STAINLES STEEL 316L TALLERES MORES 10,5 M2 TUBULAR EXCHANGER REF.: C6296 General characteristics: Manufactured by TALLERES MORES2 Type Tubular exchanger Material Stainless steel 316L Year built 2000 Technical characteristics: Exchange surface 10,5 m2 Tubes passes 2 Casing passes 1 Tubes length 2490 mm Casing diameter 300 mm

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

Both filling stations are in good condition, little in use.

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition

Recon Complete, left and right variant with exhaust valve Part number right: 1243 1318 Part number left: 1243 1319 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ------------ Sale only to commercial customers! ---------------------------------------------------------------------- ------------- If you have any further questions, please do not hesitate to contact us!

machine measurements: -- mm machine weight: -- kg power capacity: -- kW Condition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60 - batch volume approx.: 1-600 litres, - working temperature: - 150°C - drum speed: 5 - 30 rpm - Blast wheel speed: 1,000 - 9,500 rpm - Control: Siemens S7 Simatic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bakon cream blower Type: Top Cream 530 Year of construction: 2011 Stainless steel digital control Temperature indicators 1.5kW As good as new condition Height: 115cm Width: 50cm Depth: 64cm

Ceever Spraymaster Turning Spray Washer The Spraymaster series of industrial washing systems are advanced solutions for spray cleaning of small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotary table that allows the parts to be evenly wetted with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, optimizing chemical, mechanical and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Loading: 500 kg/batch Voltage: 380 volts Current consumption: 90 A Connected load: 62 kW More items - new and used - can be found in our shop! International shipping costs on request!

SALE ONLY COMPLETELY! NO RETAIL SALE! ALSO APPLIES TO WMF MACHINES. THEREFORE SAVE YOURSELF THE CALLS, HOW MUCH DO YOU WANT ONLY FOR THE WMF ETC... Coffee machine - Espresso machines 2x WMF Cafemat 5x Wmf Presto 2x WMF 1000S 11x Thermoplan Tiger (1x WMF 1000 S I kept to myself and is now in my office) in total there are 20 coffee machines A few machines are defective. or a few parts are missing. A box full of parts for the WMF is available. The machines are sold without warranty and guarantee, in net.

Treif bread slicer Type: Pegasus Sichelmesser Machine Cutting width: 4 – 14 mm adjustable analog control Stainless steel cladding 380V 50Hz Height: 120cm Width: 100cm Depth: 80cm

Muller Martini Presto – Saddle Stitcher SN: 91.06986 – 400 V The Muller Martini Presto is a highly reliable and efficient saddle-stitching system designed for medium-to-high-volume production. Renowned for precision, flexibility, and user-friendly operation, it is ideal for producing magazines, catalogs, brochures, and a wide variety of stitched print products. This complete production line includes stitching, gathering, cover feeding, trimming, and product transport—perfect for high-quality book and booklet finishing. System Configuration Stitching Machine – Type 1550 A robust stitching unit engineered for consistent and accurate wire stitching performance. 4 Double Stations – Type 1551 Which make 8 Stations Four dual feeding/processing stations that ensure continuous, efficient workflow and increased production capacity. Cover Feeder – Type 1528.0417 Automated cov ...

Demag 250 kg crane system Payload: 250 kg Control GSA Type 4 Drive: Side: 3m Forward 2m Crane system has already been dismantled. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

SHUZ TUNG NCR38B tube and profile bending machine was built in 2008 in Taiwan by SHUZ TUNG MACHINERY INDUSTRIAL CO., LTD. The machine, distinguished by its high precision and ease of operation, enables automatic bending and forming of arches from tubes or profiles with a maximum diameter of 38 mm. All process parameters, including even the most complex shapes, are programmed in the intuitive NC controller with memory for up to 500 work programmes. The NCR38B mandrel bending machine is offered with equipment, consisting of, among others, tooling for tubes with 16, 22 and 25 mm diameters. The total weight of the machine is 1500 kg. Technical specifications of the SHUZ TUNG NCR38B tube bending machine - bending capacity: 38×2 mm - bending angle: 0-190° - maximum bending radius: 170 mm - mandrel length: 1800 mm - bending speed: 45°/s - rotation speed: 240°/s - bending accuracy: ...

Baguett - Dough divider JAC Tradiform - Dough weight from 150g to 950g (option 300-1900g) - 19 kg capacity (460 x 387 x 125 mm WxDxH) - Stainless steel version - Dough division and shaping - Easylock automatic snap-in of the grid holder - Modular solution thanks to partial and moulded grids - Space-saving - fast and efficient with Easy Clean - versatile use - 100 different grids are offered - Basic equipment 1 cutting grid - up to 900 dough pieces per hour are divided and 3000 shaped Connection 400V 1.5 kW, 16A-CEE plug Dimensions: 832 x 772 x 924/1756 mm, WxDxH New machine with 12 months warranty

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

TRUMPF TruDisk 3006 6C laser source was built in 2016 in Germany by TRUMPF Laser GmbH. This extremely versatile device enables a wide range of industrial machines to be supplied with a high-quality 3 kW laser beam. The beam has many applications in modern industry. It can be used to both weld and cut sheet metal made of, e.g. steel, copper, brass and highly reflective materials. Active laser power control guarantees 100% constant power over the entire service life of the device, regardless of ambient conditions. All components, i.e. beam guide, current supply, cooling system and control system, are of modular design. They have been optimally adapted to each other inside the compact housing. The small size of the housing also enables the device to be easily integrated with, e.g. robotic systems. All this makes the offered TRUMPF 3006 laser resonator extremely reliable and robust under  ...

Process air cooler/chiller/chiller, air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 1002 P3-20-OFF – 200 kW TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump (pump on the intake side miontized) and winter package -20°C (speed control of the fans, condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Prote ...

Process air cooler/chiller/chiller, air-cooled, Type: TAEevo Tech 1002 P3-20-OFF – 200 kW Manufacturer: MTA S.p.A. TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump (pump on the intake side miontized) and winter package -20°C (speed control of the fans, condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Prote ...

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Treif Diskus Smart Circular Knife Machine Year of construction 2012 digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW New Control Board 7 Motherboard New control board New sensor New circular knife with Teflon coating Height: 110cm Width: 65cm Depth: 70cm

Heat pump, chiller - air-cooled, Type: Taurus HTAT 055/HE – 130 / 111 kW Manufacturer; MTA S.p.A. Taurus HTAT 055/HE are compact heat pump / water cooling units that are suitable for outdoor installation including with hydronic kit (tank 200 ltr. + P15 pump) for low outside temperature down to -20°C with electron. Fan speed control (EC fans). Heating capacity kW 130 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 22.5 Available pump pressure bar 1.03 Ambient temperature °C +7 Cooling capacity kW 111 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19 Available pump pressure bar 1.26 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 60 Max. Current (A) 98 Starting Current Circuit (A) 312 Protection class: IP54 Dimensions: Length mm 3415, width mm 11 ...

Very little used !

Falch Trailjet 15 Pressure Washer 500bar , 95 °C Mint condition - Manufacturer: Falch - Type: Trail Jet 15 - Registration date 07/21 - Working pressure: 500bar - Volume flow: 15 l/min - Cold and hot water up to 95 °C - Operating hours: approx. 481 h - German papers Accessories: - Optional Price excluding VAT! Net price: 32.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scater - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in. CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more.

Conical rounder Benier Bakery Teflon -Cone round knitter with Teflon cone and warp knitting rings

Falch T3H Pressure Washer 300bar, 98 °C - Manufacturer: Falch - Type: T3 H - Year: 2008 - Working pressure: 300 bar - Volume flow: 21 l/min - Generator: 230 V - Cold and hot water up to 98 °C - Operating hours: approx. 3158 h - New HD pump Accessories: - Optional Price excluding VAT! Net price: 19.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scatee - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in.

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 100 x 40 mm Truss type: GN 100x40 Agraffe: 5 HK (hook) Clear width: 4,005 mm load per pair of trusses 1,000 kg at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist

Proportionalventil, TDAC487E50LAF, Parker, neu Achtung: Das ist ein Originalprodukt und kein Nachbau aus…. Sonderpreis Wenn Sie eine UID Nummer haben stellen wir Ihnen gerne eine Rechnung ohne Mwst aus. Neu! - Wurde noch nie benutzt und ist völlig neu, - stammt aus einem Ersatzteillager eines zertifizierten Produktionsbetriebes, - ist in der Original Verpackung, 6 Monate Gewährleistung Wir geben Ihnen für diese Ware 6 Monate Gewährleistung ab Rechnungsdatum. Bei einem eventuellen Mangel, der nicht vom Käufer verschuldet wurde, kann die Ware retourniert werden. Wir werden den Käufer ausschließlich den an uns bezahlten Produktpreis rückerstatten. Die Aktualisierung im Falle digitaler Bestandteile ist ausgeschlossen. Ebenso ausgeschlossen ist die Haftung für direkte und indirekte Folgeschäden. Es gelten unsere AGBs, siehe unsere Webseite. Es gilt ausnahmslos  ...

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2013 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW

We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Bito, Type PRO Suitable for the base plate L; which are mounted on the shelf stand P1-P3. The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | Piece Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Several used TiTech Autosort and Polysort 700 1.000 and 1400 devices available

used optical sorting device Manufacturer: TiTech Type: PolySort 1400 Serial-No.: X148T, A551004-00