250 t used for sale

Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.

150 ton x 4000mm

max width: 1000 mm

MWM TCG 2016 V 12 exchange unit It is a complete, refurbished exchange unit (motor + generator + basic frame). Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

We offer you here a used pallet rack traverse of the manufacturer Jung Heinrich for sale. Technical data on the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 85 x 40 mm Truss type: GN85x41 Agraffe: 5 HK (hook) clear width: 2,775 mm load per pair of trusses 1,023 kg at the same. distributed load 02x locking pins, used Version: kompl. galvanized To secure the longitudinal beams against unintentional lifting out

Alternator Brush – Type BEJSN1100 Manufacturer: Brush Electrical Machines Ltd – Loughborough, UK Type: Synchronous Alternator (AC Generator) Exciter: Brushless Exciter, Model XL163.82A Key features: Apparent power: 3125 kVA Voltage: 5,536 V Current: 325 A Frequency: 50 Hz Speed: 1500 rpm Power Factor: 0.8 Connection: Star Phase sequence: W-V-U (counterclockwise rotation view on the drive side) Weight: 7750 kg Cooling: Not specified on plate (to be confirmed) Additional technical details: Insulation class: F (reinforcement), H (rotor) Ambient temperature: 40°C Max. altitude: 430 m Year of manufacture: 1980 Bearing lubrication: Pressure: 1.07 bar Flow rate: 22.5 L/min

Laminator - paper overboard Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery delivery on a table Condition can be purchased `as-is`or refurbished on most parts (ask details) Available Direct or very soon

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 2600 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good  ...

SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 1500 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-084-30CE Truss length: 2700 mm Load capacity: 1500 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...

GreenLine SCH 230 - Mower container with flail mower GM 130. Universal device for mowing/mulching and for simultaneous reception of the mowing material. Heavy, robust design: mulcher with leaf mallet, mowing width approx. 130 cm, adjustable bottom roller, container approx. 3.5 m³, emptying, additional tailgate in the rear for transport of z.B. straw bales or tools. Tyres 10.0x75-15.3", 10 PLY. Ab. GG 2800 kg. Power requirement from 22kw/30 HP (manufacturer's specification), 1 hydraulic connection ew (tipper connection) required! Machine with age-related defects, but operational. Equipped with inerole brake, ABE (General operating permit for public road traffic), transmission with freewheel. 1 hydraulic connection ew required. Design-identical machine also available with 150 cm mower as well as one with 150 cm and 5 m³ container. Details and prices on request.

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Sorgo smokehouse One trolley Standard 1000x1000x2000 mm

; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 419; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

for self-adhesive Tesa adhesive tape, Carton adjustable in height and width, Space requirement:1250 x 800 x 1600 mm high Weight 180 kg from location warehouse

; Power [PS]: 239; Engine: Volvo TAD881GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280

; Power [PS]: 789; Gross weight [kg]: 7500; Engine: Volvo TWD1683GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 600

X-axis stroke 8,000 mm Y-axis stroke 1,000 mm Z-axis stroke 2,000 mm ISO 50 spindle cone Front bearing spindle diameter 100 mm Total table top 1,000x10,000 mm Maximum workpiece weight per 1m board length 2,500 kg Nominal main propulsion power 22 kW Spindle rpm range - continuous 11-2,500 per minute

TBD441V16 1x Crankshaft New 12174371

TBD440-6 2x Crankshaft 12137953

TBD500-6 1x Crankshaft 12181911 New 4x Class

TBD484-6 2x Crankshaft with PTO Used No.12181169

; Gross weight [kg]: 4950; Registration Number: 2; Engine: Volvo TAD1642GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 900

The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibility: Two needle marks i ...

1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.

for liquid doughs such as waffle dough, for mixing liquids, Single-walled aluminium container approx. 200 L full capacity useful capacity up to 120 L, With outlet tap, with cover Drive 380V, 50Hz, approx. 1 kW, 1400 rpm Year of construction unknown, tested, newly sealed, with test run. Dimensions: 0.7 x 0.7 x 1.35 m high, approx. 80 kg

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3 Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No.: 22004 ...

Dosing robot mta TR 300 BJ 2010

Hammer mill Mikropul Cologne Type 3SCB Serial number: 610098002 Year of construction: 1979 Electric motor 30 to 75 Kw can be used Height: 1200 mm Width: 1200 mm Depth: 1000 mm Inlet: 170 mm x 170 mm Outlet diameter: approx. 500 mm Roller: 400 mm x 350 mm Changes and errors in the technical data, data and prices as well as intermediate sale reserved.

MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...

Ball mill Drum mill Wet grinding body Mill clinked TMNP17/2 with engine and adjustment gearbox used Manufacturer: VEB Type: TMNP 17/2 Year: 1984 Drum length approx. 2010 mm, walled out inside with wear-resistant clinkers Drum Ø ca. 1700 mm Wall thickness approx. 17 mm Drive gear Ø approx. 870 mm x 100 mm Opening approx. Ø 220 mm / 450x450 mm with coaster block gearbox and approx. 15 kW electric motor The substructure can be offered as a steel structure by us Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

TOC 900 kg vacuum lifter was built in 2021 in Poland by Przedsiębiorstwo HAK Sp. z o.o. The device, designed for lifting parts with a flat surface, is an irreplaceable tool in, among others, the handling of industrial machinery. An electricity-powered vacuum generator is located directly on its design, significantly reducing operating costs compared to pneumatically powered pumps. Furthermore, the OC-900 vacuum lifter is extremely versatile and can be mounted on the hook of any lifting device. Technical specifications of the TOC 900 kg vacuum lifter - maximum lifting capacity: 900 kg - maximum lifting area (L x W): 7000 x 2000 mm - minimum lifting area (L x W): 1000 x 500 mm - suction cup diameter: 250 mm - suction cup number: 10 - main beam length: 6000 mm - main beam cross-section: 80×80 mm - crossbeam length: 1200 mm - crossbeam cross-section: 40×40 mm - handle length: ...

Thyssenkrupp Velino xtra escalator Escalator description Manufacturer: Thyssenkrupp Model: Velino xtra FT 923 Type: 5 EK 30 Year of manufacture: 2018 General: Head: 4,129 m Step width: 1,000 m Step length: 0.203 m Handrail length: 2 x 24.967 m Rated speed: 0.5 m/s Tilt angle: 30 °C Number of steps that can be accessed at the same time: 24 Total number of levels: 58 Existing safety equipment: Start-up switch up/down, up, down Emergency stop switch, top + bottom Handrail inlet switch, right + left, up + down Chain tension monitoring switch, right + left Speed monitoring Phase control device Control Off Switch, Top + Bottom Thermal Motor Circuit Breaker Brake function monitoring Handrail speed monitoring Error Stage Monitoring Cover plate switch Drive: Single drive with duplex chain countershaft Engine make: emod Engine Type: 5CNR112L/4-20 Mo ...

specifications: - Load capacity 2000 kg - Lifting height – chain travel approx. 4 m - Weight approx. 60 kg

Volume : 618 ltr. Material : areas in contact with the product in stainless steel Working pressure : 3 bar Working pressure jacket : 3.5 bar temperature: 145°C Temperautr jacket : 148 ° C Vacuum drum : 50 mbar;

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Top condition, completely serviced and checked, built in 2018 incl. 2 backing pumps, IonMax source, HESI sample, PC and SW. THERMO Q-Exactive HF-X High Field Orbitrap High-resolution mass spectrometer for the analysis of proteins, peptides, lipids, glycans and small molecules. The Q Exactive RF system combines a segmented quadrupole for high-performance precursor ion selection with an ultra-high-field Orbitrap mass analyzer with high resolution and accurate mass determination (HR/AM) for an optimal combination of scanning speed, resolution, mass accuracy, spectral quality, and sensitivity. I Identify, quantify and confirm components in a single analysis with the Q-Exactive HFX mass spectrometer.

TWIN DISC MG 527 5.17:1 800 HP/ 596 kW 1800 rpm Brand: TWIN DISC Model: MG 527 Ratio: 5.17:1 Power: 800 HP (596 kW) RPM: 1800 RPM Used Running Take Out Features Flexible Coupling Type of drive: Spider SAE Housing/ SAE 0 Controls 18 inch, rubber block drive Aluminum ring Weight kg 1500 Dimensions (cm) 120x90x100

Gemac Jungheinrich Meta Traverse Type S The pallet rack beam type S with a width of 2700 mm offers space for three Euro pallets per pair of trusses As a replacement for damaged rack trusses, e.g. after a rack inspection has been carried out, as well as for the expansion of existing racking systems The trusses can be individually hung in height in a grid of 50 mm Manufacturer: Gemac, Jungheinrich / Meta Model / Type: S Truss length: 2700 mm Load capacity per pair of trusses: max. 3000 kg Box profile: 140 x 50 mm H x D Overall length: 2780 mm Material: Cold Rolled Steel Profile structure: Rectangular profile Fastening: Hook tabs on each side of the crossbeam for hooking, secured by locking pin Surface: Powder Coated Colour: Red-orange RAL 2001 Scope of delivery: 1 x pallet rack crossbar 2700 x 140 x 50 mm Orange More items - new and used - can be found in our ...

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 2789; Engine: TAD1341GE; Accessories: Tanker, Battery, Control Panel, including: coolant Heater and battery charger; Water Tank Volume [l]: 515

Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...