250 t used for sale

Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg

A MAN truck including a rear-mounted loader crane Palfinger PK 7501 is available. Engine power: 184kW, displacement: 6871cm³, fuel: diesel, wheel and tire size: 265/70 R 19.5, crane type: hydraulic knuckle boom loader crane, max. lifting capacity: 5400kg, reach: 13800mm, max. inclination: 20°. Documentation available. An on-site inspection is possible.

Control: SINUMERIK 840 D rolling power: 800 kn diameter max.: Werkstück: 250 mm work piece width: 80 mm spindle diameter: 110 mm : 100-700 1/min power capacity: 110 kW length: 2600 mm width: 2600 mm height: 2600 mm weight: 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø165 x 100 mm -Item No.: 829 486 65 -Heating power: 2500 W -Voltage: 230 V -Dimensions: 220/180/H100 mm -Weight: 1.3 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargotrailers -Manufacturer: Bartels, heavy-duty transport truck industrial trailer type RP-S -Platform: 2500/1250/H345 mm -Load capacity: approx. 2000 kg -Tires: solid rubber -Number: 2x transport trolleys available -Price per piece -Transport dimensions. 2500/1250/H345mm -Own weight: 100 kg/pc.

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller 0 to 250 °C -Type: unfortunately without type designation -Art.Nr.: 624603-10114-JR10A -Dimension: 130/100/H95 mm -Weight: 0.5 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 400 x 250 mm -Y-axis: 95 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 16 mm, groove spacing 63 mm -Total dimensions: 455/400/H140 mm -Weight: 40 kg

Transformer, single phase power transformer, single phase transformer, single phase isolation transformer, single phase isolation transformer, isolation transformer, solid rubber distributor -Manufacturer: ismet, single-phase isolation transformer type KSTK 2500 -Power: 2500 VA -Technical data: see photo nameplate -Dimensions: 315/270/H275 mm -Weight: 29 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 1-axle turntable steering -Platform: 2500/1260/H550 mm -Load capacity: 4.5 t -Tires: 415/100-305 KL solid rubber -Trailer coupling: for industrial trailers -Number: 1x transport trolley available -Total dimensions: 3940/1260/H550 mm -Weight: 415 kg

Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry -Individual components/dimensions: see photos, roller spacing 1640 mm -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg

turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, change holder, turning tool holder, clamp holder, turning tool holder -Turning tool: turning tool holder tool holder -Dimensions: see photos / technical drawing -Number: 4x turning tool holders available -Price: per piece -Dimensions: Ø 30 x 250 mm -Weight: 1.1 kg

Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Seacom, railcar -Weight increase: two railcars coupled together to 80t with ID37328 -Platform: 3980 x 2500 mm -Load capacity: 40,000 kg -Roller spacing: 1505 mm -Overall dimensions: 4160/2500/H885 mm -Empty weight: 3360 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 40 mm -Transport width: 250 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 8x transport wheels available -Price: per piece -Dimensions: 395/70/H70 mm -Weight: 3.2 kg/pc.

Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Seacom, railcar with drive -Type: GWN 40t -Weight increase: two railcars coupled together to 80t with ID36864 -Platform: 4000 x 2500 mm -Load capacity: 40,000 kg -Drive: with electric geared motor -Track width: 1500 mm (1420/1580) -Wheel arch width: 80 mm -Overall dimensions: 4060/2500/H770 mm -Empty weight: 2400 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: MAFI, heavy-duty transport trolley with 1-axle turntable steering and parking brake -Platform: 4000/2500/H895 mm -Load capacity: 22 t -Tires: Solid rubber dual tires 540x200x410 see photos -Overall dimensions: 5750/2500/H895 mm -Transport dimensions: 4000/2500/H895 mm -Weight: 2720 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 3 pieces -Tire size: 250/50-10 SC 10 RIM 6.50F -Rim: Mefro 41042 106 6.50F-10 ET 25 -Bolt circle: Ø 150 x 19 mm -Hub bore: Ø 110 mm -Delivery/Price: complete -Dimensions: Ø 450 x 210 mm -Weight: 35 kg/pc.

Manufacturer: DMG MORI Model: CTV 250 DF Year of Manufacture: 2019 Type of Machine : Power skiving machine / CNC Turning Center Max spindle speed: 6,000 rpm Secondary spindle speed: 7,000 rpm Machine weight: 7,000 kg Power supply: 400 V, 50 Hz, L1-L2-L3-N-PE phase Power consumption: 65 kVA Max current: 95 A Fuse: 100 A / 1.00 kA Max voltage: 440 V Control voltage: 230 V / 24 V Spare parts are available for sale separately Find more here - / Contact us at -

This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control system, a robust hydraulic 6-jaw chuck, and a flange turret with 12 tool positions. With a spindle speed up to 4500 rpm and a main spindle drive power of 18kW, its ideal for precise, efficient operations. For more information about this vertical turning machine, please reach out to us.

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turnin ...

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details.

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

CNC lathe with driven tools, year 1998, CNC MSC-501. Used machine in good condition. More info & price on IndustrialBuyer.

This 4-axis MORI SEIKI NLX 2500Y was manufactured in 2013. It features a maximum swing over bed of 742 mm and a maximum turning diameter of 366 mm. The machine includes a powerful spindle motor with 18.5 kW and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500Y horizontal turning machine we have for sale. Contact us for further details.

This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2009. It features a maximum spindle speed of 4,000 rpm, a Y-axis travel of ±60 mm, and a Z-axis travel of 795 mm. The machine is equipped with a robust turret capacity of 12 stations and offers simultaneous turning and milling capabilities. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NL 2500 SY turn-mill centre we have for sale. Contact us for further details.

turning diameter: 250 mm swing diameter: 250 mm turning height: 250 mm Control: Siemens Sinumerik 840 D total power requirement: 60 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: . mm control: Mazatrol 640 T x-travel: 190 mm y-travel: 1000 mm z-travel: 575 mm turning speeds: 4000 U/min feed: 30 m/min number of tools: 12 bar loader: nein total power requirement: 18,5 kW weight of the machine ca.: 5,9 t dimensions of the machine ca.: 5600x2100x2200 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for thi ...

Cutting length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at the cut-to-length fence: 1565 mm (telescopic extension up to 2550 mm); Cut depth: 170 mm; Scorer: no; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 9.2 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm;

Spindle swivel: No; Height adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: Scala; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000, speed display defective; Motor power: 5 / 6 kW; Engine Brake: Yes; Suction port: 120mm; Machine length: 2500mm; Machine depth: 900mm; Weight: 800kg; Powerful design in all details.High cutting performance, lifelong durability

Spindle swivel: No; Height adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: Scala; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000, speed display defective; Motor power: 5 / 6 kW; Engine brake: Yes, manual; Suction port: 120mm; Machine length: 2500mm; Machine depth: 900mm; Weight: 800kg; Powerful design in all details.High cutting performance, lifelong durability

turning diameter: max. 356 mm turning length: 705 mm control: MSX 850 III MAPPS Mitsubishi greates pass round over bed: 923,8 mm Swing dia. over traverse guideway: 755 mm standard turning dia.: 275 mm Main spindle:: max. spindle speed: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bearing diameter: 140 mm spindle bore: 91 mm max. bar capacity: 80 mm chucking diameter: 305 mm C-Axis: 0,001 ° Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle nose: JIS A2-5 spindle bearing diameter: 85 mm spindle bore: 43 mm chucking diameter: 210 mm C-Axis: 0,001 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Shank diameter: 26 mm Drill shank diameter: 50 mm Spindle speed - driven tool stations: max. 6.000 min -1 turret change time: 0,25 sec. axis stroke:: x-a ...

Eccentric press typePE25/250 with protective shield Compressive force 25 ton Strokes 8 - 60 mm Speed approx. 110 n-1

A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripher ...

Fritsch Cutting Table FT 250 with longitudinal and transverse cutting roller Cutting belt smooth simple, robust design Connection 400V, 16A-CEE plug Dimensions 2500 x 750 x 850 mm, WxDxH Used device

Maximum turning diameter: 2800 mm Maximum swing diameter: 3000 mm diameter of spindle flange: 1100 mm control: Siemens 840 D sl Table rpm: 230 1/min Maximum speed of driven tools: 6000 1/min x-travel: 2700 mm z-travel: 1000 mm Feed - X: 24 m/min feed capacity - x: 22 kN tool taper: CAPTO C8 total power requirement: 200 kVA dimensions of the machine ca.: 10,4 x 6.3 x 5,7 m weight of the machine ca.: 120 t Equipment/Accessories: - 2 tool changers one with 25 positions and one with 41 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Icon 6-250Year of manuf. : 2011 Control : Fanuc 30i ____________Description:In General:Year of manufacture:2011Control system:Fanuc 30iMaximum table load:100 kgTravel range X/Y/Z:300/300/370 mmInstallation weight:approx. 33,000 kgMachining station I (X/Y/Z/B):Technology:1 x vertical spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clamping forceTool diameter/length:125/250 mmMachining station II (X/Y/Z/B):Technology:1 x vertical spindle + 1 x horizontal spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clamping forceTool diameter/length:125/250 mmMachining station III (X/Y/Z/B):Technology:1 x vertical spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clampi ...

Abus Jib crane 250 kg Kind of: jib crane Capacity: 250 kg Span: 7000 mm

High: 479 mm, Long: 832 mm, Width: 408 mm, Distance between points: 405 mm, Specification: Measuring a horizontal coordinate

This 3-axis MORI SEIKI NLX 2500M was manufactured in 2011. It features a maximum turning diameter of 366 mm and a maximum turning length of 705 mm. The machine is equipped with a powerful spindle motor of 18.5 kW and a turret with 12 positions for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500M horizontal turning machine we have for sale. Contact us for further details.

This 4-axis EMAG VTC 250 vertical turning machine was manufactured in 2009. It features a maximum workpiece diameter of 140 mm and a workpiece length of 630 mm. The machine is equipped with a chuck diameter of 250 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VTC 250 machine we have for sale. Contact us for further details.

Offer 25346 Technical data: - Load capacity 250 kg - Jaw chuck diameter 250 mm - mot. Rotational movement left + right - Rotary movement infinitely adjustable - Height center cheek chuck approx. 900 mm - E. footswitch - 3 jaw chuck 250 mm - Mobile undercarriage - Space requirement approx. W 800 x H 1200 x D 1400 mm - Weight approx. 350 kg

turning diameter: 300 mm turning length: 497 mm control: Mazatrol PC Fusion 640T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Mazatrol PC Fusion CNC 640T CNC control 3-jaw chuck 12-fold revolver C-axis driven tools Y-axis tool presetting device (tool eye) tail stock chip conveyor coolant device bar loading device for 3m bars Technische Daten: / technical details max. Dreh-Ø / max. turning Ø 300 mm max. Schwing-Ø / max rotary-Ø 525 mm max. Drehlänge / max. turning length 497 mm Drehzahl / spindle speed 35-4000 UpM/ rpm Anzahl der Revolverplätze / numbers of tool places 12 X-Verfahrweg / x-travel 180 mm Z-Verfahrweg / z-travel 575 mm Y-Verfahrweg / y-travel +-50 mm Futterdurchlass / spindle hole diameter 62 mm Eilganggeschwindigkeit X, Z / rapid feed X, Z 30, 30 m/min. Gewicht der Maschine ca. / weight ca. 5500 kg Te ...

: gebraucht : WA0127 : 1230 € : 1 : 2500 mm : 70 mm : 70 mm : 8/11/12/16/24/36 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length:630 mm total power requirement:16 kW weight of the machine ca.:5 t dimensions of the machine ca.:3400 x 1500 x 1600 mm swing diameter over slide rest:Hinterdrehschlitten 250 mm centre height:über Hinterdrehschlitten 150 mm center height over bed:300 mm turning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mm accessories::2 Schränke Wechselräder

x-travel:2500 mm y-travel:935 mm z-travel:1000 mm table surface area:I 1615 x 800 mm table surface area:II 800 x 800 mm spindle taper ISO:50 milling head speed:60 - 3000 U/min feed speeds:1 - 3000 mm/min rapid speed:10 m/min total power requirement:45 kW weight of the machine ca.:18,5 t dimensions of the machine ca.:5 x 5 x 4 m with CNC HEIDENHAIN TNC 426 Universa Milling Head -C-axis automatic Horiz-Vertical - Intermediate angles manual table II 800 x 800 mm as B-axis ( rotary table ) coolant attachment diverse accessories

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pressure:400 t distance between columns:1100 mm stroke:250 mm no. of strokes:25 - 75 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1100 x 965 mm capacity of ejector in table:30 t ejector stroke of ejector in table:80 mm capacity of ejector in ram:3 t stroke of ejector in ram:60 / 70 mm ram surface:980 x 800 mm column travel -side:800 mm ram adjustment:20 mm power capacity:80,0 + 5,5 kW weight:47,0 t Dimensions (WxDxH):3,5 x 3,3 x 6,0 m weight of switch cabinet:1,4 t dimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 m ejector in ram:hydraulic

Various raw milk vessels and tanks connected to a valve cluster are available. 1) Volume: 25m³, Year of manufacture: 2014, Agitator: available. 2) 2x Ullmann tank storage system, Year of manufacture: 1993, Volume: 25500l, Max. operating temperature: 20°C, Operating pressure min./max.: -0.4bar/0.4bar, Agitator: available. 3) Raw milk tank, Volume: 14000l, Agitator: available. 4) Raw milk tank valve cluster. Documentation available. An on-site inspection is possible.