127,218 used machines on RESALE, but how to find them? Machine Search
pressure: 2,5 kN stroke: 45 mm throat: 90 mm Working height from to: 80 - 220 mm table surface area: 120 x 60 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 125 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: MAZAK Mazatrol 640T Nexus swing over bed: 610 mm swing diameter over bed slide: 350 mm turning length: 982 mm c-axis: indexing: 0.001 ° turning speeds: 4000 U/min tool taper: ASA A2-8 tailstock quill taper MT: 5 rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 33 m/min Overall size: 4500 x 2000 x 1600 mm weight of the machine ca.: 6.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 250 mm
Kitagawa TT 250 HMM03 NC Rotary Tables Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade plastic tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minu ...
x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm total power requirement: 6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical Flow Wrapper VPX250 + Servo Screw Dosing SDX Rovema VPX 250/400 flow-wrapping machine, overhauled, incl. repainting RAL 9007, Siemens S7 machine control and operation Condition: very good Hours: 150 Availability: immediately Refurbished: 2021 Vertical Flow Wrapper VPX250 Machine equipped with sealing system for heat-sealable packaging materials (e.g. paper/bonding films 60-100μ), with e.g.: - Cross sealing jaws 270 mm - Corrugation cross sealing jaws horizontal 12.0 2.0 mm / to be determined by foil sample - Longitudinal seam sealing jaw 420 mm - Temperature controls via machine operation, incl. monitoring - Sealing temperatures are set via Siemens program and stored per program - New foil cutting blade, pneumatically controlled Capacity: flat tubular bags: up to a maximum of 80/min. Log bottom bags: up to a maximum of 55/min. Depending on bag format ...
GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T
GUILLOTINE REEL SLITTER 35 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x17,5 Ton., No.2 pumps 30+30 lt/min, volume 21+21 ccm, Speed up: 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydrauliC pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer.
turning length: 2500 mm control: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mm swing over bed: 780 mm c-axis: 0,1-30 1/min diameter of quill: 160 mm taper bore: MK 5 tool length - max.: 500 mm weight of tools max.: 15 kg weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm) The data for this ad was crea ...
Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used
Test force: -- kN Dimensions (HxWxD): -- mm weight: 76 kg Condition: Used, ready for use Specification: Mitutoyo image processing and profile measuring device Type: Quick Scope QS-250Z 1J - Used The Quick Scope QS-250Z is used to measure: - Outer diameter - Inner diameter - Distance measurement - Parallelism - Angularity The device was used in quality assurance in a single-shift operation. Technical data: - Measuring range: X = 200 mm, Y = 250 mm, Z = 100 mm - Accuracy: 5 µ / resolution 0.5 µm - Image capture unit: 1/3 CCD color camera - Travel speed max.: 80 mm/s - Acceleration max.: 250 mm/s² - Table dimensions: 269 x 311 mm Lighting: - Transmitted light: 12V / 30W halogen - Coaxial incident light: 12V / 50W halogen - Fiber optic ring light: 12V / 100W halogen Software: QSPAK Version 3.1 Operating system: Win10pro Workpiece weight: max. 10 kg Weight: ...
turning diameter: max. 356 mm turning length: 705 mm control: M730 UM Mapps CELOS greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 80 (91) mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm C-Axis: 0,001 ° axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1 power capacity - driven tools: 5,5 / 4,2 kW total power requirement: 41 kVA weight of the machine c ...
Year of construction 2017 Machine made in Japan! Mazatrol Smooth G Max. turning diameter: 380 mm Jaw spacing: 539.5 mm Max. bar passage: 80 mm Travel X/Y/Z/W 234/100/625/585 mm Main spindle 26/22 kW Max. speed: 4,000 rpm Spindle Nose: A2-8 Sub-spindle 11/7.5 kW Max. speed: 6,000 rpm Spindle Nose: A2-5 12-speed revolver 12 driven tool stations, 5.5 kW Max. speed: 5,000 rpm Tooleye Part catcher for main and sub-spindle Conveyor Bar Feeder Interface 1 set of tool holders, 8 static + 3 driven 15-bar high-pressure pump 1 piece 3-jaw chuck, Kitagawa B210, diameter 254 mm 1 piece collet chuck for counter spindle CE marking Documentation
Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.
: 250 m³/min : 200 mbar total power requirement: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
wheel diameter: 250 mm grinding wheel size: 250 x 25 x 20 mm turning speeds: 2850 U/min voltage: 400 V total power requirement: 2.0 kW weight of the machine ca.: 23.0 kg. dimensions of the machine ca.: 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing p ...
Inv. Num. : 8680 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Table diameter: 260 mm Feed length X-axis: 680 mm Feed length Z-axis: 200 mm Maximum turning length: 100 mm Max. turning diameter: 250 mm Maximum workpiece weight: 40 kg Motor power: 35 kW Length: 3800 mm Width: 2100 mm Height: 2400 mm Weight: 7500 kg Equipment: Chip conveyor
x-axis: 675 mm z-axis: 1530 mm y-axis: 300 mm control: CELOS ERGOline turning speed range - main spindle: 4000 min/-1 spindle passage: 91 mm spindle motor: 18,5 / 15 kW speed range - counter spindle: 4000 min/-1 : 76 tool length - max.: 400 mm tool diameter: 130 mm no. of tools in turret 1: 12 milling head speed: 12000 U/min milling spindle - taper: Capto C6 milling spindle drive: 22 kW total power requirement: 88 kVA total wight: 18,2 t dimensions of the machine ca.: - m Equipped with: - CELOS ERGOline CNC control - Main and counter spindle with 4000 rpm, 91 mm passage - Kitagawa 304 mm chuck - Milling spindle with Capto C6 and 12,000 rpm, 22 kW - 76-position tool changer - Counter spindle with tailstock function - Manual tool presetter - High-pressure coolant system / IKZ 70 bar - Coolant gun - Chip conveyor - Oil skimmer - Oil separator - Renishaw Power On: 17700h, Machining: 7200h ...
used
Demag Jib crane 3 meter / 250 kg
Abus Jib crane 3 meter / 250 kg
Abus Jib crane 2.5 meter / 250 kg
Demag Jib crane 2 meter / 250 kg
Abus Jib crane 3 meter / 250 kg
2 KEER OP VOORRAAD Capacity: 250 kg
max. workpiece diameter: 500 mm threading length: 5000 mm max. module: 10 min. module: 2 workpiece dia. over saddle: 250 mm center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece spindle bore: 102 mm thread pitch: 1 - 800 mm speed of workpiece (milling): 0,0034 - 2,65 U/min feeds - longitudinal: 0,256 - 195 mm/min feeds - rolls: 0,0256 - 5,17 mm/WU hob turning speeds: 45 - 900 U/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 8,5 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 7,0 x 1,7 x 1,6 m Thread-, Worm-,gear shafts- and Spline Milling Machine with : equipped with: - Thread Milling Head ApGs - Counter Stay - 1 Bush Rest - 2 Steadies - Cabinet with change Gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 380 mm, 1000 mm, 4000 1/min
Stock number: 3961 CNC LATHE Manufacturer: MAZAK, Type: QTN 250-1000L Year of Make: 2004 Specifications: Max. circumferential diameter 380 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1032 mm Main motor power 26 kw Main spindle speed range 4000 rpm Hole through drawing pipe 80 mm dia. X axis movement 230 mm Z ash movement 1000 mm Tool turret with 12 stations Total power consumption 50 kva Control 640 T Nexus Fabr. Spindle Hours 6091 Hours Controlled in X-Z axes Accessories: Hydraulic Main Center Chuck Kitagawa B-212 15X (300mm) mm dia. Various tools pcs. Tool setter Chip conveyance. Length: 3550 mm, Height: 1870 mm, Width: 2000 mm, Weight: 5200 kg
swing diameter: 560 mm turning length: 800 mm control: C200-4D Siemens 840 D Main spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1 bar capacity: 90 mm spindle diameter in front bearing: 140 mm turning speed range - spindle: ~ 3.500 U/min drive capacity - spindle motor: 100% / 40%: 43 / 57 kW Torque: 275 / 363 Nm Indexing: 2,5 ° C-Axis: 0,001 ° turret:: Number of Turrets: 1 number of toolpositions: 12 pos. Spindle speed - driven tool stations: ~ 6.000 min -1 power capacity - driven tool-stations: 11 kW tool taper: 40 x 63 mm DIN 69880 Torque: 21,5 Nm travel -x axis: 300 mm travel -z axis: 800 mm rapid traverse: X/Z: 30 / 22,5 m/min feed power: X: 7.200 N feed power: Z: 9.000 N Tailstock:: dia. of quill: 65 mm Cone: SK 30 longitudinal travel: 800 mm rapid traverse: 10 m/min total power requirement: 51 kVA weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 7,3 x 4,0 ...
Unused SGB 2500kva transformer 2500kva 6000 / 400 volt DYN5 50hz CU matrial
CONTROLS PLC SIEMENS S5 95U PRESS DESIGN drive system: hydraulic frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 table cushion: yes PRESS FORCES total force (nominal): 650 to PRESS TABLE table surface (left-right): 3000 mm table surface (front-back): 1800 mm SLIDE slide force: 630 to table surface (left-right): 3000 mm table surface (front-back): 1800 mm stroke: 1000 mm SLIDE (HYDR. PRESS) approximation velocity max.: 200 mm/s working velocity min.: 7 mm/s working velocity max.: 15 mm/s return velocity max.: 120 mm/s return force: 65 to DIE CUSHION (TABLE CUSHION) cushion force: 250 to stroke: 400 mm cushion plate surface (left-right): 2500 mm cushion plate surface (front-back): 1450 mm working principle: hydraulical TOOL ASSEMBLY DIMENSIONS distance tabl ...
PHW 2500 WP Pallet truck Pallet Truck Weibert 2.5t Industrial and commercial design with weighing device, display and printer for paper weight output Display steps / measuring interval 0.5kg Lifting capacity 2500 kg Max. fork height 200mm Min. fork height 80mm Fork dimensions 1150x540mm Stroke 120mm Weight 90kg G&STÜ-6150283
turning diameter: 640 mm turning length: 1.185 mm control: SINUMERIK 840D swing diameter: 640 mm distance of spindle heads: 1500 mm slide I:: X1 / Y1 / Z1 / B slide travel X-axis: 550 mm slide travel Z-axis: 180 mm Z- Travel: 1.185 mm B - axis: 240 ° feed x-axis: 0 - 40.000 mm/min feed y- axis: 1 - 24.000 mm/min Feed z- axis: 1 - 70.000 mm/min feed B-axis: 1 - 20 1/min rapid traverse X/Y/Z: 40 / 24 / 70 m/min feed capacity X/Y/Z: S6: 7,00/11,00/7,50 kN tool taper: HSK 63 turning speed milling-spindle: 10 - 12.000 1/min power capacity at 100 % load: 13,20 kW power capacity at 40 % load: 22,00 kW torque milling spindle: 60 / 100 Nm tool magazin:: no. of workpieces in the magazine: 46 Stück tool length - max.: 350 / 200 mm tool diameter: 80 mm wotkpiece diameter with 2 vacant positions: 120 mm weight of tools max.: 6 / 10 kg slide II:: X2 / Z2 slide travel X-axis: 180 mm Z- Travel: 1.050 ...
Fabricante MORI SEIKI Modelo NLX2500SY/700 Mes / Año 12/2011 CNC MORI SEIKI M730 BM Capacidades Volteo sobre bancada/carro 590/360 mm. Diámetro máximo torneable 460 mm. Longitud máxima torneable 795 mm. Paso de barra 80 mm. Eje Y INCLUIDO Recorridos y avances Recorrido eje X/Z 260/795 mm. Rango eje Y ±50 mm. Recorrido sub-cabezal eje B 734 mm. Avance rápido ejes X, Z, B 30.0000 mm/min Avance rápido eje Y 10.0000 mm/min Avance trabajo ejes X, Y, Z, B 0-5.000 mm/min Cabezal Eje C en cabezal INCLUIDO Indexación eje C cabezal 0.001º Velocidad cabezal 4.000 rpm Número gamas velocidad cabezal 2 Tipo nariz cabezal JIS A2-8 Diámetro paso cabezal 91 mm. Potencia motor principal 18.5 kW Sub-cabezal Eje C en sub-cabezal INCLUIDO Indexación eje C sub-cabezal 0.001º Velocidad sub-cabezal 6.000 rpm Número gamas velocidad sub-cabezal 1 Tipo nariz sub-cabe ...
This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information.
This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information.
This 10-axis NAKAMURA WT 250 horizontal turning machine was manufactured in 2004. It features a bar capacity of 65 mm, two turrets with driven tools, a Y-axis on the upper turret, and a subspindle. Equipped with a FANUC 18i-TB controller, bar loader LNS SPRINT S2, and a piece unloader. Ideal for complex machining tasks. Reach out for further details regarding this horizontal turning machine.
This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information.
This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, its equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine.
This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with 18kW and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us.
This vertical turning machine was manufactured in 2011. The EMAG VLC 250 features a Siemens Sinumerik 840Dsl control system, a 12-station tool turret, and a 3-jaw power chuck with a quick jaw change system. It includes a coolant system with a paper band filter and an electrostatic emulsion mist extractor. Ideal for handling workpieces up to 175mm in height and 12kg in weight. For more information about this vertical turning machine, please reach out to us.
Key data: 250 mm
Walther Rotary Table RTN 250 NEGd + Siemens brushless servo motor IFT6044-1AF71-3AG1 (1pc) used, ready for use
Heckert ZFWVG 250 x 2000 Thread Milling and Spline Hobbing Machine. Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 2000 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Dimensions 3700x2400x1600 mm Total weight 5200 kg Accessories; -heavy duty head -standard head -steady rest -flange -change gears full set
Key data: 350 mm, 700 mm
DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available
HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.
Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible.
This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information.
This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information.
maximum number of results exceeded
please refine your search
