128,440 used machines on RESALE, but how to find them? Machine Search
68,150 liter ZKG tank/ pressure tank/ storage tank LARGE, with cooling jacket and insulation Material No. V2A Year of construction 1995 Total height 10870 mm diameter 3400 mm Outer diameter 3870 mm Cylinder length 6000 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground
51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye
65,900 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Total height 12400 mm diameter 3000 mm Outer diameter 3480 mm Exterior surface 2B=IIIC ground Interior surface 2B=IIIC ground
53,700 liter brewing water tank with insulation, built in 2022 Material No. V2A Total height 10500 mm Height 9700 mm diameter 2800 mm Outer diameter 3230 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Year of construction 2022
Robust swivel milling machine T 26 swivel from -45 to +45 degrees Swivel milling machine in very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench T226 comfort stop with digital displays for overall adjustment and infeed jaw individually, as well as input of the cutter diameter, whereby the cutting depth is automatically calculated Stop with lifting device can be swivelled away (for s ...
The testing device can measure even the smallest leaks in packaging (helium detection)., The device is little used and in good condition., Information from the manufacturer’s brochure:, The detection limit of < 10-8 mbar l/s of the CONTURA Z can only be determined by mass spectrometric, Analysis can be achieved with a test gas., However, when sensitive flexible packaging is exposed to such a pressure difference,, the sealing seams could be subjected to such severe stress that the package could even burst., Such stress is eliminated by the patented membrane chamber principle of the CONTURA Z²., Function:, The product to be tested is placed manually or automatically on the bottom membrane. When the lid, is closed, the test procedure is initiated automatically., During the evacuation, the pressure of the atmosphere pushes the highly elastic membranes against the, packaging, and the conto ...
Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120â4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details.
Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!
Key data: 32 mm, 32 mm, 320 mm
Stock number: 4010 CNC lathe SWISS TYPE Manufacturer: TSUGAMI, Type: BO326E-II - 2016 Machines NO.: 23031A, Year of manufacture: 2016 Specifications: Size capacity 32 mm Ø Ma. turning length (fixed guide bush) 320 mm Ma. Turning length (Rotary guide bush) 70 mm Max. threading force of the main spindle M 10 Max. speed drilling capacity 12 mm Main spindle effect 3.7/5.5 kw Sub-spindle Sub spindle speeds 8000 rpm Spindle bore 32 mm Driven tool transformer 6000 ( 4800) - 1 kW pr/min Subspindle effect 2.2/3.7 kw Control Fanuc 32i-B Fabr. Axis Controlled X1-X2-Z1-Z2-Y1-Y2 Opreation time 6575 hours Length: 2400 mm, Height: 2000 mm, Width: 1500 mm, Weight: 3500 kg
Hours: 2,272 hrs Drive: 4x4 (all-wheel drive) 4-cylinder Zetor turbo diesel engine Power: 76 hp / 56 kW Weight: 3,749 kg Front loader available Air conditioning Front Tyre: 340/85 R24 Rear Tyre: 420/85 R34
Hours: 1,245 hrs Power: 115 hp 6-cylinder engine Weight: 4,739 kg SLE transmission (40 km/h) 2x hydraulic control units (manual) 2-speed PTO Swivel trailer coupling Air conditioning Air-suspended driver's seat Passenger seat Sunroof
Hours: 1,596 h Power: 138 hp (103 kW) 4-cylinder engine Continuously variable transmission (Vario/IVT) Maximum speed: 40 km/h Electrical control units (hydraulics) Weight: 4,750 kg Tyres: Front Tyre: 540/65 R28 BKT Rear Tyre: 580/70 R38 BKT
Two horizontal stainless steel tanks with various fittings., Volume: 20800 l, Operating pressure: 1 bar, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal
Vertical stainless steel tank, most recently used as a CIP tank., Additional title: CIP tank; year of manufacture appr. 1995, Capacity: 7000 l, Width: 1,8 m, Height: 3,2 m, Weight: 350 kg, Material: Stainless steel, Position: Vertical, Base construction: 3 x feet, Features: Side manway; Level indicator; Outlet DN65
Vertical, insulated stainless steel tank. Most recently used as a CIP tank., Additional title: Vertical stainless steel tank with insulation; built around 2000, Capacity: 7000 l, Width: 2,2 m, Height: 3,1 m, Weight: 800 kg, Material: Stainless steel, Position: Vertical, Base construction: 3 x feet, Features: Side manway; insulation
Sewage sludge tank made of stainless steel, with insulation, agitator and side tapping., Additional title: Stainless steel tank with insulation, Capacity: 100000 l, Operating temperature: 80 °C, Material: Stainless steel, Position: Standing on concrete foundation, Base construction: Cylindrical tank with flat bottom, Features: Insulation with stainless steel cladding, feed pump (volume flow 12m3/h); agitator, ladder with back protection, tank top railing,
Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data: Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...
BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 live positions: yes WORKING RANGE TURNING swing diameter (max): 560 mm turning diameter (max): 275 mm bar diameter (max): 42 mm worpiece length max.: 450 mm MAIN SPINDLE spindle revolutions (min): 5600 /min drive power: 11 kW X/Z SLIDE number of tool positions (total): 11 number of live positions: 11 - rotation speeds (max): 4500 /min TAILSTOCK sleeve stroke: 60 mm sleeve diameter: 70 mm holding force (max.): 8600 kN ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 1600 mm total height: 1800 mm total weight approx.: 3500 kg ATTACHMENTS (TURNING) chip conveyor: yes European CE standards: yes
CONTROLS CNC controls NUM 1060 M WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 2 X-axis travel: 3000 mm Y-axis travel: 2010 mm Z-axis travel: 2000 mm rotating range A-axis from: 92.5 ° rotating range C-axis up to: 360 ° TABLE table surface (left-right): 1450 mm table surface (front-back): 1600 mm FLOOR PLATE total weight approx.: 12000 kg SPINDLE / HEAD spindle revolutions (max): 3000 /min tool fixture: ISO SK 50 drive power: 37 kW AXIS DRIVES traverse velocity X (max): 25000 mm/min traverse velocity Y (max): 25000 mm/min traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz ATTACHMENTS chip conveyor: yes through spindle coolant attachment: yes
- Producer Venjakob / Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200
Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes
A medium- to low-voltage distribution transformer France Transfo is available. Power: 800kVA, upper voltage: 10000V, overvoltage: 12kV, impulse voltage: 75kV, winding test: 28kV, connection: D YN05, insulation class: A, rated current: 46.2A/1155A, short-circuit voltage: 6%, cooling type: ONAN, oil weight: 450kg, weight: 2100kg. Documentation available. An on-site inspection is possible.
Bundle packer Packing sizes in feeding direction max. width 400, depth 450, height 300 m Foil width max. 530 mm Output max. 25 packs/min 2 infeed conveyor 1x for folding boxes, product width max. 220 mm 1x for bottles/cans, product width max. 80 mm Stacking device for folding boxes PLC Siemens S7-300 Simatic touch panel Connection 400V/50Hz/2kW Shrinking tunnel Tunnel width 450 mm Tunnel height ca. 260 mm Tunnel length 800 mm Max. heating temperature 300 °C Grid band (speed adjustable) Digital temperature monitoring Cooling fan PLC Siemens S7-300 Connection 400V/50Hz
Heating oil tank, 27.000 litres for heating oil / diesel – used - : Price: only 9.950.-€ (net) ex site, emptied, cleaned and incl. loading! Manufacturer: Kampitz Manufacturer Part Number: 42089 Year of Make: 2022 Type: Z 38 12-312 Volume: at permissible filling height: 27.82m3 Permissible. Filling Degree: 95% Material (inside and outside): S 235JR Hazard class: FP > 55 degrees C Permissible density: 1.0 kg/ltr. Test pressure storage space: 2.60 mWs Test pressure leak monitoring room: -0.60bar Max. medium temperature: 50 degrees C Medium: Heating Oil / Diesel Condition: good Available: immediately Location: Bünde, NRW
Offer 26103 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg
Year of Make: 2010 Engine power: 152 kW Operating hours: only 1,614 h Maximum speed: 40 km/h PTO speeds: 540 / 540E / 1000 - Tyres: Front: 600/65R28 BKT - Equipment & Extras: All-wheel drive Pneumatic system Electronic Hoist Control (ELC) Front hydraulics Front loader Front PTO Front axle suspension Hydraulic steering Comfort cab Air conditioning Crawler gear Load-sensing system Radio
- Technical data: Engine power: 88 kW / 118 hp Operating hours: only 1,566 Maximum speed: 40 km/h PTO speeds: 540 / 540E / 1000 Weight: 4,800 kg - Tyres: Front: 420/85 R24 Rear: 460/85 R38 - Equipment & Extras: All-wheel drive On-board computer Electronic Hoist Control (ELC) Front loader Front loader attachment frame Front axle suspension Hydraulic trailer brake Comfort cab Cab suspension Air conditioning Powershift shuttle (clutchless) Radio Rotating beacon Towbar
S/s table with plastic top, dimensions: 1500 mm x 600 mm x 940 mm.
S/s table, dimensions: 1800 mm x 600 mm x 920 mm.
2 s/s tables with plastic top, dimensions: (2x) 1500 mm x 600 mm x 930 mm.
TVI crustfreezer, type: CBF2000, clearance: (2x) 720 mm x 190 mm, inside dimensions: 1620 mm x 1050 mm x 2450 mm, total dimensions: 2250 mm x 1950 mm x 2800 mm. Trolley with 34 baskets, dimensions: 2350 mm x 1150 mm x 1900 mm.
Treif Maschinenbau GmbH slicer, model: Divider 880, machine number: 541301.160825.111010, year of construction: 2012, 400/480 V, 3 Ph, 50/60 Hz, 19.5 A, 8.2 kW, weight: 1950 kg, 4 lanes, plastic infeed belt, belt width: 445 mm, dimensions slicer: 5100 mm x 1870 mm x 2700 mm. Technical condition unknown.
Treif Maschinenbau GmbH slicer line, consisting of: - Slicer, model: Divider 880, machine number: 541304.184670.118165, year of construction: 2013, 400 V, 3 Ph, 50/60 Hz, 19 A, 2 lanes, plastic wire belt, belt width: 480 mm, dimensions: 5450 mm x 1950 mm x 2300 mm. - Tray feeder line, model: Einlegerlinie, machine number: 430001.184789.116682, year of construction: 2013, 400 V, 3 Ph, 50/60 Hz, 24 A, 13 kW, weight: 2300 kg, plastic belt, belt width: 540 mm, dimensions tray feeder line: 5500 mm x 1760 mm x 1660 mm. Technical condition unknown.
Treif Maschinenbau GmbH dicer, model: Twister, machine number: 041209.210507.127227, year of construction: 2016, 380-480 V, 3 Ph, 50/60 Hz, 6.0/8.16 kW, 670 kg, dimensions: 2000 mm x 1600 mm x 1400 mm.
Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...
Offer 26110 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 230 V / 1.25 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg
Offer 26106 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg
Excellent condition - Fully operational - Loading / Transport possible! Table dimensions 1255 x 900 mm, table height 900 mm, motor power 6 kW, speeds 3000/4500/6000/9000 rpm, tool holder SK 40, double-sided electromotive spindle adjustment, electromotive table opening switching 72/105/160/225/305 mm, spindle diameter 30 mm, integral fence AIGNER, extendable workpiece support, spindle height adjustment 150 mm, 4-roll-feed unit MAGGI STEFF 2044, 8 feed rates 4 to 66 m/min, Electromotive Integral Fence Adjustment, Double-sided Table Extensions 580 mm plus Swivelling Stop per Side.
pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...
turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel
turning diameter:220 mm turning length:- mm control:- distance between milling spindels:800 mm spindle speed max.:12.000 U/min daylight:66 mm machine weight ab.:11 t total power requirement:90 kVA Fanuc control Two turrets Two spindles Spindle bore 66 mm on both spindles Two Y-axes Parts gripper Hainbuch chuck on both spindles Tailstock function Chip conveyor Tool eye Short bar loader Tool holder package
spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg
x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 Lifting operator platform External tool cooling Spindle clamping support
turning diameter over bed:20 mm spindle passage:3-20 mm turning length:250 mm control:FANUC 31 i-A main-spindle speed:10.000 1/min subspindle speed:10.000 1/min Main spindle capacity:3,7 kW subspindle power:2,2 kW number of tools:35 weight of the machine ca.:3,3 t dimensions of the machine ca.:2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short ...
table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.
turning diameter:275 mm turning length:900 mm spindle passage:65 mm power capacity at 100 % load:25/20 kW spindle turning speed range:1 - 5000 U/min spindle diameter in front bearing:110 mm c-axis:1 - 500 U/min. number of workpiece supports:4 tool turret:1 x-axis:290 mm y-axis:165 mm z-axis:360 mm b-axis:360 ° rapid speed:18/30 m/min number of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mm toolpiece turning speed range:8000 / 2000 U/min power capacity:25% ED 5,8 kW tool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mm z-axis:600/950 mm y-axis:+/- 60 mm rapid speed:18/15/30 m/min number of driven tools:10 mm toolpiece turning speed range:1 - 6000 U/min power capacity:25% ED 5,8 kW tool taper:DIN 69880 40 x 63 total power requirement:95 kW weight of the machine ca.:16 t dimensions of the machine ca.:10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and ...
faceplate diameter:4000 mm swing diameter:4300 mm turning height:330 mm faceplate turning speed range:1 - 92 U/min workpiece weight:18 t feeds:1 - 4000 mm/min main drive motor:55 kW total power requirement:85 kVA weight of the machine ca.:64 t dimensions of the machine ca.:90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor
spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment
maximum number of results exceeded
please refine your search
100 € 
