250 t used for sale

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 82 mm -Short taper: 8 -Weight: 24.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg

Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Transmission: n/a -Weight: 25 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

Round table, round dividing table, dividing head, dividing head -Table: Ø 250 mm -Height: 100 mm -Groove: 12 mm -Dimensions: 320/400/H100 mm -Weight: 33 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 20 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 19 kg

Stock# UG6359 Little used automatic tube filling machine by Pablo (PL) model TB-250. Machine can work on filling plastic tubes (PE/PP). Dose range from 5 - 250 ml. Machine can run on tubes with diameters: 19, 25, 30, 35, 40, 50 mm. Height of tubes in range from 10 up to 210 mm. Working output depends on product and size of tube. For tubes with diameter 25-30 mm - in range from 3000 - 5000 pcs/h. Power consumption 7 kW, 3/400 V, 50/60 hz. Compressed air 6 bar. Cooling water connection dia 10 mm, outlet diameter 8 mm. Machine new 2020. Shipping dims: 1991 mm x 1441 mm x h 2300 mm/2600 mm (with pole) x weight 800 kg.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm -Passage: Ø 76 mm -Weight: 26 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Through hole: Ø 78 mm -Weight: 30 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Recess: Ø 200 mm -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm -Weight: 25 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Recess: Ø 210 mm -Bolt circle: 3 x 230 mm -Passage: Ø 80 mm

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prism groove: 7/10 mm -Square: 66 x 26 mm -Length: 2505 mm -Weight: 24 kg

Bending tool, die, upper knife, upper tool, deer foot tool -Tool: for press brake -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool radius: mm -Dimensions: 14 x 94 mm -Length: 2500 mm -Weight: 20 kg

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 250 mm -Recess diameter: 205 mm -Bolt circle: 226 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Flange: Ø 210 mm -Hole circle: Ø 230 mm -Through hole: Ø mm -Weight: 19 kg

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Röhm, three-jaw chuck with clamping plate -Mouth size: Ø 250 mm -Passage: Ø 76 mm -Mounting plate: 500 x 310 mm -Overall dimensions: 500/310/H300 mm -Weight: 72 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: tank capacity approx. 40 liters -Filter: RT-Filter RMS-80 -Filter capacity: 80 l/min -Level indicator: -Dimensions total: 490/250/H565 mm -Weight: 23 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 39 x 250 mm -Total length: 1265 mm / 1 x 500/400/365 mm each -Weight: 65 kg

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

Spray machine -Closing force: 25 tons -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 250 mm -Dimensions: see drawing in the photos -Dimensions: 285/180/H280 mm -Weight: 21.6 kg

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Control: SIEMENS 840D Max.turning length: 1185 mm Max swing diameter over bed/slide: 640 mm/550mm Workpiece diametr: 400/250 mm Material passage through the spindle: 65 mm Max.diameter of the material for barloader: 65 mm Rotation speed(max.) 5000 rpm Sp

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 250 mm -Passage: Ø 80 mm -Clamping plate: Ø 305/60 mm -Bolt circle: Ø 280 mm -Weight: 37 kg