250 t used for sale

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Sell a Thissen telescope. new Never been installed. For a 30NC-244.384, Ident No. 20761, Art.Nr.: A2976001, .VB

Thermal motor contactor relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -60-100 A Class 10 -Weight: 0.8 kg

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 30 m³ Dimensions: Ø 2.50 m × 6.60 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Turbo mixer brand: TPM, stainless steel, capacity: 400 liters, 2-speed engine: 1500/3000 rpm, power: 60/72 kW, stainless steel chiller, brand: TPM, capacity: 1000 liters, with double chamber for cooling. Reduction motor: 10 hp. Year 2005.

Capacity, ton 1000 Slider stroke, mm 400 Unattainable stroke, mm 12 Slider strokes, spm 20 Shut height, mm 730 Distance adjustment between table and slider, mm 200 Slider size, mm 1200 x 1200 Table size, mm 1250 x 1250 Table gap size, mm 800 x 800 Bolster plate thickness, mm 260 Pneumatic cushion capacity (eject), ton 40 Pneumatic cushion stroke, mm 160 Pneumatic cushion load, kg 4500 Main power drive, kW 75 Voltage, V 340 Machine dimensions, mm 4310 x 3820 x 6790 Machine weight, kg 77100

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg

Technical data for the pallet rack traverse: Shelving system: Tegometall Type: CI The scope of delivery includes: 01x pallet rack traverse, used Material color: white Box profile: 130 x 50 mm Agraffe: 4 HK (hook) Truss type: ITG130|50 clear width: approx. 1,400 mm 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Dimensions: 1015/950/1830 mm -Material: stainless steel -Weight: 90 kg

SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)

Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

spindle passage: 12 mm Control: Fanuc type: LB 2 bar loader: FMB total power requirement: kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt mobile dimensions (l x w x h) : ± 2.200 x 800 x 1.200 mm

3 rows of pallet racks, 3.5 m high, each 9 fields (2700), each 2 truss levels - 30 frames / 120 trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 3.50 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks We answer questions preferably by email. Or let us know your phone number – we will be happy to call you back at the desired time You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Ref. 443 Light table Mega steel Type 399-3 Fabr. - Order No.: 93-674 Year of construction 1993 Table size: 70 x 100 cm Table top diagonally adjustable Height infinitely adjustable motorized from 85 to 115 cm Light source: 2 fluorescent tubes

Brand: MATELEC Model: 3 phase ONAN Transformer Power rating: 1000kVA Voltage: 15 - 20kV / 410V Additional info: Dyn 11, 50Hz Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.

Transformatoren Technik Jahnsmüller TU6/90M Pri:115/230V 82/41A Sec:230V 39.1A Weight: 49.5kg

Transformer station with precast concrete building L = 5.50m, B = 3.00m, H = 1.00m + 2.70m - Three-phase cast resin transformer - Low-voltage distributors - Undermeasurement - Mains protection component

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Admission recess: Ø 160 mm -Passage: Ø 56 mm -Weight: 10 kg

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.

Automatic hardness testing device with 4 heads Micro IRHD IRHD Type L IRHD Type N IRHD Type H The device needs gibitre software installed on the computer to work. The device consists of a stand and 4 heads

Automatic hardness testing device with 3 heads Shore 00 Shore A Shore D The device needs gibitre software installed on the computer to work. The device consists of a stand and 3 heads

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed

Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978

Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph

90m Trapezoidal threaded spindle, steel, warehouse liquidation, TR30x6 bis TR10x3, , new -75% Single-start, rolled threaded spindles with trapezoidal thread according to DIN 103, in material C35/C45, in many sizes between TR10x3 to TR30x6. Special price These threaded spindles come from a stock liquidation, therefore we offer a bundle with spindles for an absolute special price. The current purchase price of these threaded spindles is € 2354 excl. VAT Our selling price is only 25% that is € 588 excl. VAT Attention: The photos do not correspond to the indicated quantity Scope of delivery: appr 180kg TR30x6 right: 3x780mm TR28x5 right: 1x1940mm, 1x1180mm TR26x5 right: 6x950mm, 1x850mm, TR26x5 left: 1x1900mm, 3x1000mm, TR24x5 right: 2x1570mm, 1x1700mm, 2x840mm, TR24x5 left: 2x2000mm, 1x1120mm, 1x840mm, TR22x5 right: 1x2000mm, 1x790mm TR20x4 right: 1x2000mm, 1x ...

Roller bench Material thickness 1 mm Usable length 1,275 m Weight 200 kg

Folding bench TEKO Sheet thickness 1.9 mm Usable length 2025 mm Length 2500 mm Width 650 mm Height 1080 mm Weight 500 kg

Clamping claw box made of solid steel GR 9 (new) 4 pieces

537 KW Tuthill Nadrowski back-pressure steam turbine C4. S-GIII from 2004, only turbine (was used as a pump). 1 available inlet pressure 90 bar, outlet pressure 18 bar, Price: € 19,500 each, plus VAT and FCA-free Manufacturer: TUTHILL Nadrowski Model: C4. S-G III Type: Steam Back Pressure Serial Number: 21004 Power [kW]: 537 Pressure inlet [bar]: 90 Pressure outlet [bar]: 18 Speed (rpm) 3.554 Year of construction: 2004 Weight [kg]: 2.440 Dimensions LxWxH [cm]: 370x138x174

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 320 mm -Bore center: Ø 57 mm -Rotary table: swiveling -Dimensions: 360/310/H320 mm -Weight: 64 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm -Weight: 28 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57 mm -Dimensions: 355/200/H245 mm -Weight: 42 kg

FOLIANT Taurus 760 SF Industrial Laminating Machine year 2017 Max sheet size : 760 x 1150 mm Min sheet size : 320 x 250 mm Max speed : 30 m/min Paper weight : 115 - 600 gsm Temp control : 80 - 140 C Lamination films : BOPP 23 - 42 microns , max nylon film max 35 microns, PET film max 25 microns - Pallet Feeder - Touch screen controls - PLC controlled overlaps - Almost 8 minute warm up time - Film air shaft - Integrated Bump separator - Pallet stacker

Cantilever racks SPECIFICATIONS Mast height: 4000 mm (blue) Truss length: 1200 mm or 1200+1200 mm (orange) Item 1 05 Supports 10 trusses Grid/round POSTS 2 07 Supports 14 trusses Grid/round Item 3 11 Double-sided supports (re-li) 44 trusses Grid/round Base 2600 x 30 x 30 mm Item 4 17 double-sided supports (re-li) 68 trusses Crossbars Base 2600 x 30 x 30 mm

Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reverse gear with: fast reverse -Thread sizes: M5-M18 -Recording: MK3 -Dimensions: 380/95 mm -Weight: 2.6 kg

Single screw Extruder Theysohn 63mm

HAISHU CNC550T 4-axis CNC Lathe Producer- Taian HAISHU Machinery Co. Ltd YOM 2015 Condition- Never used Equipped with two spindle and an additional lower turret with 12 tools, providing automatic two-way processing of the workpiece in the achievement of maximum processing speed. Control CNC GSK988TD Additional Y axis Max. working length 750 mm Maximum turning diameter over bed 550 mm Maximum turning diameter pallet 500 mm Spindle type А12 Hydraulic Jaws: 2x 300 mm Front spindle bore taper 1:20 Spindle pass 75 mm Speed of Servo spindled 0-4000 mm/min Axis X/Z/B Quick moves 40 000 mm/min CS1, CS2 power of main motors: 15 kW Engine motor on axle C- 5.5 kW Moment by Axis X/Z: 15 Nm Movement on Y axis: + 55/-55 mm; Moment on axis B: 20 N. m; Time to change tool 1.6 sec Positioning accuracy 0.005 mm Moves on axes X1/X2- 350 mm Moves on axes Z1/Z2- 1100/1350/1850 mm ...