128,273 used machines on RESALE, but how to find them? Machine Search
Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 1282 kg,
Height=1.21 m, Overall length= 0.78 m, Overall width= 1 m, Net weight= 150 kg,
3 Jaw Lining SMW 250 BH At Für are more than 30 pairs of baking part nail new ! Condition very good Shipping with cargo transport possible for an extra charge. Invoice with VAT.
: 250 m³/min : 200 mbar total power requirement: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump
grinding width: 32.0 mm max. dia. of grinding wheel: 250 mm grinding wheel size: 250 x 32 x 32 mm turning speeds: 2850 U/min Grain size: K 36 / K 80 engine output: 1.5 kW voltage: 400 V weight: 30.0 kg range L-W-H: 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 6,5 mm ST 40 : 3,5 mm VA : 90° Grad blade length: 250 x 250 mm table:: 810 x 750 mm work height max.: 950 mm engine output: 4,0 weight: 630 kg range L-W-H: 810 x 750 x 1150 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 2.5 mm throat: 260 mm distance between roll centers: 92.0 mm weight: 295 kg range L-W-H: 1200 x 700 x 1200 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Total weight, approx.: 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - t ...
diameter of brush: Ø 250 mm width of brush: 40.0 mm turning speed range: 2850 U/min voltage: 400 Volt total power requirement: 1.3 / 1.8 kW weight of the machine ca.: 36.0 kg dimensions of the machine ca.: 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...
Inv. Num. : 8643 Type: LEK 250 Producer: ZTS Generated: GO Parameters: Compressive force: 250 t
: 24000 kg length: 5000 mm width: 2500 mm loading area height: 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings. The data for this ad was crea ...
Key data: 250 t
Inv. Num. : 8652 Type: ZHS 250 Producer: ŽDB Hydraulika Generated: 2000 Parameters: Compressive force: 250 t Table length: 3500 mm Table width: 1200 mm Stroke: 700 mm Ram dimensions: 3500 x 1200 mm Working speed: 13-60 mm/s Machine height: 6000 mm Machine length: 3000 mm Machine width: 5000 mm Machine weight: 60000 kg
Maximum temperature: 650°C Interior dimensions: Width 650 mm Depth 750 mm Height 600 mm electr. Connection: 380 V, 20.7 kW Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm
Key data: 250 , 7
Presión: 7,5 bar. Potencia: 250 kW. Velocidad de rotación: 1490 r/min. Equipado con unidad de recuperación de energía ATLAS COPCO ER S-5 (2012). Con un variador de velocidad instalado y reacondicionado LEROY SOMER POWER DRIVE MD2. N.º de serie: AIF 051684.
Elements: Double-sided grinding machine 2500 C4/0E. General equipment per machine: motorized width adjustment with automatic positioning, coolant pump for coolant recirculation, 1x solenoid valve for water supply, manual glass thickness adjustment, transport belts with Low-E kit. Automatic destacking of large glass formats (6000x3210mm) from main production, which are then cut into corresponding individual panes. Further processing: individual panes can be flexibly processed further (cutting, grinding, drilling). Cleaning: afterwards the panes pass through an industrial washing and drying unit. Quality control: after cleaning, an automatic quality control is carried out using a scanner. Tempering process (ESG): panes can be fully automatically destacked or optionally passed through a tempering furnace. In the furnace, the glass is heated to approx. 600°C and then cooled to produce tempe ...
Used autoclave made by Jugema PPUH type Autoclave 250 (E). New 2017. Technical data: - Power supply: 3/N/PE AC 400/230V, - Power: 22.5 kW, - Working pressure: 3 bar, - Working temperature: 0 - 133 °C, - Test pressure: 4.5 bar, - Capacity 250 L.
- Rebuild in 2010 with SIEMENS TOUCH - Rebuild cost EUR 200.000 - Distance measuring device with double taster - Big package with pressing tools in several diameters
Max. saw blade diameter: 250 mm Manual material tensioner Saw blade lubrication
2 x Injection Molding Machines Manufacturer. Arburg Type : 270S-250-60 BJ 1996
1. Speed: 1,000- 1300ctns/hr 2. Model: CFL-2500TB 3. Carton Size: L: 200 mm W:200mm to 500mm H: 160mm to500mm 4. Machine dimension: L: 1000 mm W: 900 mm H: 1375 mm 5. Tape width: 48mm; Tail: 50mm 6. Machine weight: 126kg 7. Power: 1 phase 240V, 50/60Hz
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg
Injection moulding machine Demag erg. 250/560 840 BJ 2001
Used manual batch ultrafiltration line for cottage cheese made by Agros Milko-Polska. Capacity: 2.500 kg of finished product in 8 hours, concentrated to 72% dry matter. New: 1996
4. Specifications Item Unit OGM-250UDX Capacity Swing diameter over table mm 220 Distance between centers mm 500 Max. workpiece diameter mm 200 Max. workpiece weight kg 60 (center of workpiece) Grinding wheel Outer diameter x width x bore mm 305x25x 127 Rotational speed (by changing the belt) min-1 2357 / 2087 Max. peripheral speed m/min 2000 Grinding headstock X-axis travel mm 203 Angle of inclination degrees + 30o Min. travel increment mm 0.001 Feed value with hand wheel mm/min 2 per revolution of the wheel Table Z-axis travel mm 640 Angle of inclination degrees 4 to 9 Feed rate with hand wheel mm 7.5 per wheel revolution Automatic feed rate mm/min 50 to 4000 Head Workpiece Spindle type - Spindle for combination of non-rotating- rotating Morse taper No. 3 Spindle through hole diameter mm 17.5 Spindle speed min-1 10-500 Angle of inclina ...
BANDERA BLOWN FILM EXTRUDER, for PE, Bandera extruder with screw diam.90 mm., 250 mm die diam. on original Bandera head, reconditioned (not the one in photo), a.c. drive with inverter, calibrator, haul off unit, corona treatment, single color small printing group, single winding station with manual discharge 1.200 mm., good overall conditions, availability: immediate, working width: 1.200 mm., conditions: good
Inv. Num. : 8712 Type: RUR 2500 GP Producer: Pierce Created: 2007 Parameters: Work table length: 6000 mm Work table width: 2000 mm Track size: 8000 x 2500 mm Plasma Source: Cebora CP200 Autogenous: Harris Maximum sheet thickness (plasma): 20 mm Maximum sheet thickness (oxy-fuel): 200 mm Positioning speed: 12000 mm/min Equipment: Wrykrys Program Nesting USB stick
Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg
A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.
turning diameter over bed: 500 mm turning diameter over slide rest: 310 mm turning length: 3000 mm turning diameter in the gap: 750 mm centre height: 250 mm turning speeds: 20-1000 U/min no. of turning speeds: 18 spindle bore: 56 mm longitudinal feed: 0,045-1,09 mm/U face feed: 0,025-0,625 mm/U number of feeds: 55 total power requirement: 4 kW weight of the machine ca.: 2,37 t dimensions of the machine ca.: 4,9 x 1,1 x 1,3 m Machine still in the delivery factory: Electric 380 Volt: chuck: Forkard 315 mm Tool holder system Multifix: Typ C Taper turning device: Chip protect bonnet: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine
H&C Fours ETG 250°C Max temperature: 250 °C Capacity: 2000 x 2000 x 2200 mm Power needed: 6.5 kW Voltage: 400V
turning diameter: max. 300 mm turning length: max. ca. 550 mm control: PC Fusion CNC 640 T standard turning dia.: 276 mm swing diameter: max. 525 mm Distance Spindlenose - turret face: 115 - 690 mm Main spindle:: turning speed range - main spindle: 35 - 4.000 min/-1 power capacity - main spindel: 22 kW max. Torque: 351 Nm spindle nose: A2-6 spindle bore: 76 mm max. usable bar diameter: 64 mm chucking diameter: max. 250 mm C-Axis: 360 ° turret:: number of toolpositions: 12 pos. tool taper: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm turret change time: 0,2 / 0,6 sec. Tool Drive:: Spindle speed - driven tool pos.: 25 - 4.500 min -1 power capacity - driven tool pos.: 3,7 kW max. Torque: 35 Nm Subspindle:: Spindle speed range subspindle: 35 - 4.000 min/-1 power capacity - Sub spindle: 7,5 kW max. Torque: 57 Nm chucking diameter: max. 150 mm axis stroke:: x-axis: 190 (185 + ...
Injection moulding machine Stork N-2500-1400 Injection unit: Spray pressure (max.) 2100 bar Spray volume (max.) 595 cc Injection weight hp (max.) 565 g Spraying speed (max) 299 cc/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the bars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control) ...
spindle diameter: 250 mm x-travel: 12000 mm y-travel: 5850 mm z-travel: 1600 mm w-axis: 2000 mm Control: Siemens type: 840 D Powerline turning speeds: 875 U/min dimension of the ram: 540x560 mm coolant: 1800 l chip conveyor: total power requirement: kW weight of the machine ca.: 130 t Overhaul of the machine 2010 Spindle mount SK 60/50 with adapter Traversing speed: Axis X/Y: 9,000 mm/min. Travel speed: Z/W axis 4,000 mm / min. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on ou ...
x-axis: 675 mm z-axis: 1530 mm y-axis: 300 mm control: CELOS ERGOline turning speed range - main spindle: 4000 min/-1 spindle passage: 91 mm spindle motor: 18,5 / 15 kW speed range - counter spindle: 4000 min/-1 : 76 tool length - max.: 400 mm tool diameter: 130 mm no. of tools in turret 1: 12 milling head speed: 12000 U/min milling spindle - taper: Capto C6 milling spindle drive: 22 kW total power requirement: 88 kVA total wight: 18,2 t dimensions of the machine ca.: - m Equipped with: - CELOS ERGOline CNC control - Main and counter spindle with 4000 rpm, 91 mm passage - Kitagawa 304 mm chuck - Milling spindle with Capto C6 and 12,000 rpm, 22 kW - 76-position tool changer - Counter spindle with tailstock function - Manual tool presetter - High-pressure coolant system / IKZ 70 bar - Coolant gun - Chip conveyor - Oil skimmer - Oil separator - Renishaw Power On: 17700h, Machining: 7200h ...
Rühle Frozen Meat Slicer Type GFR 450 / 250 CW 5.5 Cross cutter 4 pieces
Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible.
x-travel: --- mm y-travel: --- mm z-travel: --- mm Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: --- mm y-travel: --- mm z-travel: --- mm Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Working hours : 134.000 h
max. workpiece diameter: 500 mm threading length: 5000 mm max. module: 10 min. module: 2 workpiece dia. over saddle: 250 mm center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece spindle bore: 102 mm thread pitch: 1 - 800 mm speed of workpiece (milling): 0,0034 - 2,65 U/min feeds - longitudinal: 0,256 - 195 mm/min feeds - rolls: 0,0256 - 5,17 mm/WU hob turning speeds: 45 - 900 U/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 8,5 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 7,0 x 1,7 x 1,6 m Thread-, Worm-,gear shafts- and Spline Milling Machine with : equipped with: - Thread Milling Head ApGs - Counter Stay - 1 Bush Rest - 2 Steadies - Cabinet with change Gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS&FREUDENBERG Name: Dewatering screening machine Type: "Roberg" 1000/2500/1 Year of manufacture: unknown Screen length: 1,000 mm Screen width: 2,500 mm
Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour frame: Ral 5015 blue Material colour half-timbering: sendz. galvanized Frame profile: PLFB 30 Profile dimensions: P 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,250 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm
NEW, 240 cm width, 1.01 m³ capacity, with Manitou attachment, 351 kg dead weight, with 11 teeth
maximum number of results exceeded
please refine your search
