250 t used for sale

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid version -Width: 2500mm -Depth: 800 mm -Height: 755mm -Quantity: 1x workbench available -Weight: 53 kg

Fire extinguisher, fire hose box, fire hose box, fire extinguisher cabinet, fire extinguisher cabinet -Fire extinguisher cabinet: wall hydrant with hose reel -Fire hose: with pipe nozzle -Number: 2x fire extinguisher cabinet available -Price per piece -Dimensions: 1175/250/H850 mm -Weight: 55 kg/piece

0: 250 mm 0: 3530 m³/h 0: 2500 pa Dimensions (L/W/H): 3.350x1.020x2.290 mm engine output: 5,5 kW turning speeds: 2800 U/min compressed air: Pmax 8,0 bar weight: 1100 kg Nestro dust extractor NE 250 W For sale on behalf of the customer ex location -------------------------- Manufacturer description: Dust extractor with pneumatic shaking and automatic water extinguishing system Including suction nozzle d=300 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW 400V/50 Hz, on/off switch, potential-free Contact for machine monitoring, motor protection switch, Pressure difference display, 3 mobile dust bins Clamp bracket, 3 chip collection bags (PE) 600x600 mm, i=1100mm Housing made of galvanized sheet steel Technical data: Nominal volume flow 3,530 m3/h associated negative pressure 2,500 Pa Suction side connection d=250 mm Continuous operation mode Type of current: three-phas ...

Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Inside: Ø 100 mm -Hole circle: Ø180 mm/ M10 / Ø230/10 mm -Dimensions total Ø 250 x 23 mm -Weight: 6.1 kg

sheet width: 2500 mm plate thickness: 3,0 mm distance between columns: 2620 mm true cutting angle adjustable: - back stop - adjustable: 850 mm cutting gap adjustment: - mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions: 3,2 x 1,8 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

Pester Pewo Pack 250 SN

Vernier caliper, caliper, vernier caliper -Manufacturer: Format, caliper caliper -Measuring range: 0-250 mm / 0-10 inches -Measurement accuracy: 0.05 mm / 1/128 In -Dimensions: 360/140/H9 mm -Weight: 0.4 kg

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, -Clamping plate: surface plate, marking plate -Size: 415 x 250 mm -Height: 60 mm -Dimensions: 415/250/H60 mm -Weight: 45 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm Type: S1-50/32x250 TGL 10906 -Piston rod: Ø 32 mm -Mounting: bolt circle Ø 120 x 14 mm -Dimensions: 425/110/H110 mm -Weight: 8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm -Type: B2-40/18x250 TGL 10906 -Piston rod: Ø 18 mm / M16 -Holes: Ø 24 mm -Dimensions: 285/75/H90 mm -Weight: 4.2 kg

KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3

Key data: 1 mm, 510 mm, 460 mm

Mazak FJV-250 (2PC) Built in 1999 Mazatrol PC Fusion 640 M Control X: 1,020 mm Y: 510 mm Z: 460 mm Table size: 1,200 x 500 mm Milling spindle drive power: 22 kW Max. speed: 12,000 rpm SK-40 Tool magazine with 30 tool positions 2-fold pallet changer 4th axle, Hofmann RWNX-160 with counter holder Mazak Monitoring B, Renishaw OMP60 Probe Cooling by the spindle High-pressure pump, 15 bar Conveyor Zero-point clamping plate

Hydraulic folding machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper beam, back gauge (1000mm), goat's feet with automatic tool clamping, electr./hydr. Adjustment of the bending beam -Similar to illustrations- hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touch screen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 250 mm -Groove width: 14 mm, dimensions see photo technical drawing -Dimensions: 250/56/H41 mm -Weight: 2.4 kg

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane block, crane hook, load hook, single hook -Crane hook: Load hook load capacity 250 kg -Type: PNo 025 -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 165/105/50 mm -Own weight: 0.9 kg

Key data: 250 mm, 1 t, 1200 mm

Sheet thickness max. 2 mm Largest belt width 250 mm Coil Outer Diameter 1200 mm Coil inner diameter 430 -550 mm Max. coil weight 2 x 1600 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal  ...

Inv. Num. : 6634 Type: MGH 250 Produzent: MECTRON Erzeugt: 2010 Parametern: Steuerungssystem: SINUMERIK 840DSL Arbeitstischlänge: 400 mm Arbeitstischbreite: 300 mm Maximale Tischbelastung (gleichmäßig): 80 kg Maximale Vertikalspindeldrehzahl: 30000 1/min Minimaler Abstand zwischen der Spindel und dem Tisch: 100 mm Maximaler Abstand zwischen der Spindel und dem Tisch: 350 mm Verfahrwege X-Achse: 250 mm Verfahrwege Y-Achse: 250 mm Verfahrwege Z-Achse: 250 mm Maximale Vorschubgeschwindigkeit Achse X: 36 m/min Maximale Vorschubgeschwindigkeit Achse Y: 36 m/min Maximale Vorschubgeschwindigkeit Achse Z: 36 m/min Kegel: HSK E 25 Anzahl der Achsen: 3 Stücke Maschinenhöhe: 1070 mm Maschinenlänge: 1660 mm Maschinenbreite: 1800 mm Maschinengewicht: 1850 kg Ausstattung: Kühler OilMatic C750 Transformator

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

Dosing machine AG 8 DPE 250 built in 2012 with hot double jacket on the storage tank and accessories (filling heads and screw conveyor)

Suitable for high throughputs of ground meat, hamburger, breakfast and dry sausage production as well as production of vegetables, fillings, etc. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles, enabling a fast emptying. 2 x units in stock

Key data: 250 t

Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise

Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm electr. Connection: 400 V kW Space requirement: 1200 x 870 x 1810 mm Weight: 470 kg Heating capacity: 16.5 kW

Control panel, control unit, steering, steering unit -Manufacturer: Linde, steering unit control unit from electric tractor P 250 -Individual components: see photos -Transport dimensions: 630/470/H355 mm -Weight: 16.6 kg

Gearboxes, spur gears, angle gears, worm gears, bevel gears -Manufacturer: Poggi, gearboxes, bevel gears -Shafts: Ø 24 x 50 mm -Number: 3x gearbox available -Price: per piece -Dimensions: 250/250/H86 mm -Weight: 4.9 kg/piece

Danobat RTM-2500 CNC X600 CNC Surface Grinder Grinding Length: 100" Grinding Width: 28" Table Length Dimension: 98.43" Table Width Dimension: 19.690" -Grinding Wheel- Grinding Wheel Diameter: 20" Grinding Wheel Width: 4" Grinding Wheel Bore: 8" -Wheel Head- Angle Adjustment: 0 DEG Wheel Head Motor: 20 HP Wheel Head Speed: 1,200 RPM -EQUIPPED WITH- Fagor 8055 CNC Control Magnetic Swarf Conveyor

Chassis, electric motor, DC motor, traction motor, drive motor order picking forklift, drive wheel electric pallet truck -Manufacturer: Linde, chassis from electric forklift R20 -Type: R20 2503 -Wheel mount: bolt circle Ø 115 mm M14 -Individual components: see photos -Dimensions: 560/460/220 mm -Weight: 36 kg

Height 1800 mm Width 650 mm Length 1450 mm Power supply: 400V 50Hz 3N Total power 1.1 kW Main Material Stainless steel, acid-resistant Number of heads Single-head Work belt width 300 mm Belt feed adjustmentYes Belt type made of plastic

High-frequency ignition device, heating, gas and oil burners, control box, combustion control, burner control -Manufacturer: Landis & Gyr, firing control -Type: LOK16.250A27 -Dimensions: 105/105/H125 mm -Weight: 1.2 kg

Auxiliary switch, circuit breaker, fuse, line switch, circuit breaker, load break switch, terminal board -Manufacturer: wöhner, fuse switch disconnector switch disconnector -Type: QCB NH1 250A -Fuse: 3x 160A -Number: 1x load-break switch available -Dimensions total: 250/180/H115 mm -Weight: 3.0 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 350 mm -Material: Steel -Dimensions: see photo -Dimensions: 350/250/H200 mm -Weight: 62.3 kg/pc.

Key data: 10000 , 3950 , 2500

Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Belt width: 250 mm -Conveyor length: 810 mm -Drive shaft: Ø 30 x 100 mm -Dimensions: 810/560/H225 mm -Weight: 63 kg

Boiler 250 litres, oil-heated

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Total conveyor belt width: 250 mm / 2 x 100 mm belt width -Conveyor length: 1330 mm -Drive shaft: Ø 30 x 100 mm -Transport dimensions: 1355/560/H225 mm -Weight: 87 kg

diameter: 250 mm total power requirement: kW weight of the machine ca.: 0,05 t dimensions of the machine ca.: m 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm KK 140 fastening: 4 pcs. screws M 16 / 170 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Square, locksmithsquare, hair square, precision hair square -Angle stop: Leg length 510 x 250 mm -Dimensions: 510/250/H40 mm -Weight: 2.3 kg

Stop square, locksmith square, control square -Angle stop: Leg length 355 x 250 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 400/250/H25 mm -Weight: 2.7 kg/pc.

Square, locksmith square, hair square, precision hair square -Angle stop: Leg length 250 x 160 mm -Quantity: 1x angle stop available -Dimensions: 255/160/H22 mm -Weight: 0.5 kg

Inv. Num. : 7817 Type: RUR 2500 G Producer: PIERCE Created: 2014 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 120 mm Equipment: Rails Burning Machine Baths