25 mw used for sale

A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50900 € : 962.01 € : 2540 mm : 6.5 mm : Hydraulisch : 135 ° : 3900 mm : 1750 mm : 2050 mm : 6200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,-- OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle swivel: No; Height adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: Scala; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000, speed display defective; Motor power: 5 / 6 kW; Engine brake: Yes, manual; Suction port: 120mm; Machine length: 2500mm; Machine depth: 900mm; Weight: 800kg; Powerful design in all details.High cutting performance, lifelong durability

Cutting length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at the cut-to-length fence: 1565 mm (telescopic extension up to 2550 mm); Cut depth: 170 mm; Scorer: no; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 9.2 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm;

Suction nozzle diameter: 250mm; maximum volume flow: 5000 m³/h; Nominal volume flow: 3534 m³/h; Volume flow monitoring: pressure differential indicator; Filter area: 25.4 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 70 db; Scout bag volume: 480 l; Filter cleaning: mororic; Motor power: 5.5 kW; Extinguishing device: yes; Machine length: 3510 mm ; Machine width: 880 mm; Machine height: 2545 mm; Weight: 850 kg; The Riedex vacuum dust collectors have been developed for the extraction of wood chips, wood dust and related substances, but also

Suction diameter: 250 mm; Discharge diameter: 250 mm; Volume flow: 5000 m³/h; Motor power: 5.5 kW; Weight: 100 kg; Very stable blower with steel impeller.

Motor power: 1 kW; Filter area: 2500mm x 1600mm; Exhaust nozzle: 300mm; Current consumption: 2.3 A; Weight: approx. 120 kg;

Manufacturer: Mimaki Technical specifications: - Maximum print width: textile 1,920 mm, paper 1,940 mm - Print resolution up to 1440 dpi - Print speed up to 66 m²/h - Printhead: On-demand piezo, 4 in-line printheads - Supports multiple ink systems, including sublimation, pigment, dispersion, reactive and acid inks; currently equipped with Mimaki TP400 pigment ink for direct printing on fabric in cyan, magenta, yellow, 2x black, red, blue, and light black. - No pre- or post-treatment is necessary; the textile only needs to be heat-set afterwards. - Material types: Cotton, silk, hemp, polyester, nylon and paper - Interfaces: USB 2.0 / Ethernet - Machine dimensions approx. 3,200 x 965 x 1,857 mm, weight approx. 260 kg - Including Mimaki software Find more here - / Contact us at -

cutting diameter: 250 mm saw band length: 3660x25x0,9 mm cutting width: - mm total power requirement: 1 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2x10,5x1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : OH0109 : 150 € : 1 : 22 mm : 420 mm : 450 mm : 250 mm 2clamping surfaces 6 T-sluts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kneading dish made of stainless steel without carriage for double conical kneader DK 250, Fabr. W&P

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12100 € : 232.32 € : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 2500 kg : 1300 mm : 450 - 550 mm : 400 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56100 € : 1060.29 € : 2540 mm : 3.5 mm : Hydraulisch : 135 ° : 3 kW : 3850 mm : 1700 mm : 1860 mm : 3700 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control) OPTION: 2 axes NC control with touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47400 € : 905.34 € : 2540 mm : 4.5 mm : Hydraulisch : 135 ° : 3900 mm : 1700 mm : 1900 mm : 5100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 668.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 155 ° : 110 mm : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the b ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

General SKU104U1451 MakeZiemann Ludwigsburg No.507690/6 Year of construction1986 Mounted on legscheck Pressure Working pressure5.4 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2500 Ltr Vessel sizesdia. 1400x1250mm Dished bottomcheck Dished top sidecheck Top connections4x dia. 25mm Outletdia. 35mm Half coil jacketedcheck (26 Ltr) Max. temperature140°C. With propellor stirrermake Ekato Motor0,75 KW, 380 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace1,6x1,5 m Total height3,3 m Weight800 kg ATEX compatiblecheckDiscountStainless Steel ReactorsZiemannDiscountReactors > Stainless Steel ReactorsBrand > Ziemann What you can expect from Foeth: -- Machine is  ...

General SKU104U1450 MakeZiemann Ludwigsburg No.507690/5 Year of construction1986 Mounted on legscheck Pressure Working pressure5.4 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2500 l. Vessel sizesø 1400 x 1250 mm Dished bottomcheck Dished top sidecheck Top connections4x ø 25 mm Outletø 35 mm Half coil jacketedcheck 26 l. Max. temperature140 °C With propellor stirrercheck Ekato Motor0,75 kW, 380 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace1,6x1,5 m Total height3,3 m Weight800 kg ATEX compatiblecheckDiscountStainless Steel ReactorsZiemannDiscountReactors > Stainless Steel ReactorsBrand > Ziemann What you can expect from Foeth: -- Machine is in w ...

General SKU029F122 MakeEMDE Industrie- Technik Nassau TypeKH-300 + MDRD-120 + C-250 No.A 106.0212 Year of construction2006 Mounted in framecheck With 2 containers (dia. 800mm), type C-250 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillers Lifting + tilting machine/Container emptying station/vibro feeder (1x) Powder filler/Container emptying station/vibro feeder (1x) Dosingscale 15 KG Capacity250 Ltr. Dosing with vibro feederscheck With motor0,55 KW, 230/400 Volt Information LocationBarneveld Mounted on wheelscheck With switchgearWith vibro feeder type MDRD-120 Floorspace2,1x2,0 m Total height2,1 m Weight920 kg Extra SpecificationsContainers in stainless steel 1.4301 (304)DiscountPowder fillersEmde NassauDiscountPackaging machines > Powder fillersBrand > Emde Nassau What you can expect from ...

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 199300 € : 3766.77 € : 250 to : 8 mm : 1400 mm : 800 mm : 250 mm : 23 - 220 mm : 25 - 50 1/min : 950x620 mm : 8 : 120 mm : 410 mm : 820 mm : 33 kW : 1600 mm : 2900 mm : 4250 mm : 25000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment - die safety controls - alarms view -overload protector PRICE FCA  ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42900 € : 819.39 € : 2540 mm : 2.5 mm : Hydraulisch : 135 ° : 3850 mm : 1700 mm : 1800 mm : 3400 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. wor ...

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turn ...

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 NmToo ...

Size: 265 mm Impression: 2 Mio. Equipments: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 102300 € : 1933.47 € : 80 to : 2550 mm : 4 : 320 mm : 2840 mm : 500 mm : servomotorischer Riemenan : 105 mm/s : 10 mm/s : 105 mm/s : 650 mm : 250 mm : 3700 mm : 2200 mm : 2550 mm : 6400 kg Electromotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17 - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guar ...

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg

General SKU104U1454 LocationBarneveld MakeZiemann Ludwigsburg Type2500 l Pressure Working pressure5.4 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2500 l Vessel sizesdia. 1400x1250 mm Dished bottomcheck Dished top sidecheck Top connections4x dia. 25 mm Outletdia. 35 mm Half coil jacketedcheck (26 l.) Max. temperature140°C. With propellor stirrermake Ekato Motor0,75 KW, 380 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4541 (321) Information Year of construction1986 Mounted on legscheck Floorspace1,6x1,5 m Total height3,3 m Weight800 kg ATEX compatiblecheckStainless Steel ReactorsZiemannReactors > Stainless Steel ReactorsBrand > Ziemann What you can expect from Foeth: -- Machine is in working condit ...

number of spindles: 4 bore capacity in steel (diameter): 25 mm bore stroke: 120 mm weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1.55 x 0.65 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 25400 € : 485.14 € : 1250x2500 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : 1/10 mm : 470 l : 500 kg/m² : 3060 mm : 1760 mm : 1500 mm : 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Syn ...

General SKU327X681 MakeDe Dietrich LocationBarneveld CEcheck TypeAE 250 Pressure Working pressure7 Bar Vacuum possiblecheck Main Features MaterialGlass Volume327 Ltr. Motor1.5 KW Vacuumcheck Specified Features - Stirring vessel MaterialGlass - Enamel (3009U) Closed stirring vesselcheck Capacity250 l. (327 l.) Vessel sizesø 700 x 900 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN100 with pneumatic valve Max. temperature—5 / 90 °C With propellor stirrercheck Motor1,5 kW (400 V, 1390 rpm, (Ex)) Speed mixing shaft168 rpm Information No.69193 Year of construction2008 Mounted on legscheck Floorspace0,95 x 0,95 m Total height3,00 m Weight900 kg Extra SpecificationsThe vessel is designed per Directive 94/9/EC (ATEX), Category II 2 G, Zone 1, Gas Group IIB, T-class T4 (max. 135 °C), max. medium temp. 90 °C. Conformity per Directive 97/ ...

General SKU327X682 MakeDe Dietrich LocationBarneveld CEcheck TypeAE 250 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Volume327 Ltr. Motor1.5 KW Vacuumcheck Specified Features - Stirring vessel Closed stirring vesselcheck Capacity250 l. (327 l.) Vessel sizesø 750 x 900 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN25 with valve Max. temperature—5 / 90 °C With propellor stirrercheck Motor1,5 kW (400 V, 1390 rpm, (Ex)) Speed mixing shaft168 rpm MaterialGlass - Enamel (3009U) Information No.69197 Year of construction2008 Mounted on legscheck Floorspace1,00 x 1,00 m Total height3,00 m Weight820 kg Extra SpecificationsThe vessel is designed per Directive 94/9/EC (ATEX), Category II 2 G, Zone 1, Gas Group IIB, T-class T4 (max. 135 °C), max. medium temp. 90 °C. Conformity per Directive 97/23/EC (PED) ...

General SKU327X683 MakeDe Dietrich LocationBarneveld CEcheck TypeAE 250 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Volume327 Ltr. Motor1.5 KW Vacuumcheck Specified Features - Stirring vessel Closed stirring vesselcheck Capacity250 l. (327 l.) Vessel sizesø 700 x 900 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN55 with valve Max. temperature—5 / 90 °C With propellor stirrercheck Motor1,5 kW (400 V, 1390 rpm, (Ex)) Speed mixing shaft168 rpm MaterialGlass - Enamel (3009U) Information No.69198 Year of construction2008 Mounted on legscheck Floorspace0,95x0,95 m Total height3,00 m Weight820 kg Extra SpecificationsThe vessel is designed per Directive 94/9/EC (ATEX), Category II 2 G, Zone 1, Gas Group IIB, T-class T4 (max. 135 °C), max. medium temp. 90 °C. Conformity per Directive 97/23/EC (PED),  ...

eccentric press Type: LE 250 P Manufacturer: VSS Year: 2008 Pressing force: 250 t Stroke: 30-140 mm Max number of strokes: 45/min Slide adjustment: 110 mm Worktable dimensions: 1120 x 800 mm Ram dimensions: 800 x 475mm Machine weight: 13000 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

sheet width: 2550 mm : 4 mm sheet thickness for stainless steel: 2 mm rear stop: 750 mm total power requirement: 7,5 kW weight of the machine ca.: 3050 kg dimensions: 3300 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity Youtube video link: https://www.youtube.com/watch?v=pCuKwtBIQto&ab_channel ...

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm dimensions of saw-blade: 450 x 45 x 2,0 mm cutting width: 280 x 200 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: square: 170 x 200 mm cutting speed: 16- 32 m/min power requirement: 1,3 kW dimensions: 1,3 x 0,55 x 1,0 m weight: 180 kg Used hook saw in good condition - less used, only for our own light use. - 1x extra saw blade - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:356 mm turning length:705 mm control: CELOS M730 UM MAPPS swing dia.:742 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 ( ±50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min Rapid travel B-axis (parts transfer subspindle):734 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:15/18,5/18,5 kW Spindle 1 Torque:409/505 /599 Nm Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:4500 1/min Spindle 2 power:7,5/11 kW turret stations / rotary tool stations:20 / 20 BMT40 speed of driven tools:10000 1/min :3.7/5,5/5,5 kW torque rotary tools:14 / 24 Nm total power requirement:38 kVA weight of the machine ca.:6,3 t dimensions of the machine ca.:4 (9) x 2,1 x 2,2 m Parts catcher:Sp. 1 und Sp. 2 Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) Tool presetter:Spindle 1 & 2 High precision Turning and Millin ...

turning diameter:356 mm turning length:705 mm control:MSX 850 MAPPS II swing dia.:755 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 (+-50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min rapid traverse Y-axis:10 m/min Rapid travel B-axis (parts transfer subspindle):30 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:18,5/18,5/15 kW Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:6000 1/min Spindle 2 power:11 / 7,5 kW turret stations / rotary tool stations:16 / 16 VDI 30 :5.5/5,5/3,7 kW speed of driven tools:6000 1/min total power requirement:39,2 kVA weight of the machine ca.:6,2 t dimensions of the machine ca.:3,1 x 2,0 x 2,2 m Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by MAPPS II Control.

x-travel:800 mm y-travel:950 mm z-travel:1020 mm control:Sinumerik 840D sl MDynamics Operate turning speeds:10.000 1/min Spindle power:26/20 kW max. torque on the spindle:340/262 Nm tool taper:HSK-A 100 tool change unit:120 (2x60) Pos. Pallet changer 2x:630 x 630 mm table load capacity:800 kg weight of the machine ca.:20 t dimensions of the machine ca.:3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don?t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle  ...

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...

internal diameter:140 mm total power requirement:5,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:2,8 x 2,5 m max. workpiece weight:15 kg clamping dia. max.:140 mm clamping length:250 mm max. bore diameter to be ground:0,8-90 mm min./max. hole to grind:160 mm centre height:90 mm workpiece spindle stepless:112-1000 U/min

grinding length:4000 mm grinding width:1450 mm workpiece height:1250 mm total power requirement:40 kW dimensions of the machine ca.:12,3 x 6 x 4,8 m distance between columns:1460 mm table surface area:4000 x 1250 mm max. workpiece weight:11.000 kg cross rail adjustment:1250 mm Machine is in very good condition for highest precision! With CNC control SIEMENS 840 D 1 universal grinding support, 7.5 kW, swivelling grinding spindle ±110° Peripheral grinding wheel dimensions Ø 500 x 60 mm Vertical adjustment 350 mm, with dressing device 1 peripheral grinding support, 22.5 kW Grinding wheel dimensions Ø 600 x 100 mm Vertical adjustment 150 mm, with dressing device With 6 magnetic plates arranged on the table Various grinding wheel holders

turning diameter:356 mm turning length:700 mm y-axis:±60 mm spindle drive:18 kW counterspindle motor:15 kW Direct drive for driven tools:5,5 kW Motor starting torque:640 Nm Main spindle mount:A2-8 counter spindle mount:A2-6 Rod passage:80 mm main spindle speeds::4.000 U/min Drehzahl angetriebene Werkzeuge :6.000 U/min rapid traverse speed:30 m/min auf X- und Z-Achse machine weight ab.:5.800 kg 12-station turret, all positions driven C-axis on both spindles Belt-driven and infinitely variable drive on all motors Prismatic guideways on all axes Oil cooler for both spindles, manufacturer Daikin Automatic, dialog-guided programming system MAPPS Automatic monitoring of tool load and tool wear Two Renishaw measuring arms for automatic tool measurement Interfaces: USB, PCMCIA card, and RS-232 port Interface for bar feeder Automatic parts catcher Dual foot pedal for independent opening and clos ...

turning diameter:x. 350 mm turning length:985 mm swing dia.:610 mm clamping range for bar work:77 mm speeds:350 - 4.000 U/min Torque:465 Nm spindle nose:A2 - 8" spindle bore diameter:88 mm chucking diameter:254 mm numbers of tools:12 travel -x axis:190 mm travel -z axis:1.025 mm rapid traverse X-axis:30 m/min rapid traverse Z-axis:33 m/min Tailstock Travel:1.010 mm tailstock taper MT:4