25 mw used for sale

Presse à injecter ARBURG 100 T type 420C 1000-250 Année de fabrication : 1999 En bon état de fonctionnement Pompe neuve Force de fermeture : 1000 KN / 100 T Diamètre vis : 40 mm Volume injectable : 188 cm3 Pression d’injection : 1530 bars Rapport L/D : 18 Ouverture max des plateaux : 750 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 570 x 570 mm Entre colonnes : 420 x 420 mm Dimensions : 4,15 x 1,60 x 2,02 m

x-axis: 675 mm z-axis: 1530 mm y-axis: 300 mm control: CELOS ERGOline turning speed range - main spindle: 4000 min/-1 spindle passage: 91 mm spindle motor: 18,5 / 15 kW speed range - counter spindle: 4000 min/-1 : 76 tool length - max.: 400 mm tool diameter: 130 mm no. of tools in turret 1: 12 milling head speed: 12000 U/min milling spindle - taper: Capto C6 milling spindle drive: 22 kW total power requirement: 88 kVA total wight: 18,2 t dimensions of the machine ca.: - m Equipped with: - CELOS ERGOline CNC control - Main and counter spindle with 4000 rpm, 91 mm passage - Kitagawa 304 mm chuck - Milling spindle with Capto C6 and 12,000 rpm, 22 kW - 76-position tool changer - Counter spindle with tailstock function - Manual tool presetter - High-pressure coolant system / IKZ 70 bar - Coolant gun - Chip conveyor - Oil skimmer - Oil separator - Renishaw Power On: 17700h, Machining: 7200h  ...

Injection moulding machine Stork N-2500-1400 Injection unit: Spray pressure (max.) 2100 bar Spray volume (max.) 595 cc Injection weight hp (max.) 565 g Spraying speed (max) 299 cc/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the bars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control)  ...

Rühle Frozen Meat Slicer Type GFR 450 / 250 CW 5.5 Cross cutter 4 pieces

Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible.

x-travel: --- mm y-travel: --- mm z-travel: --- mm Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Web handling system with web guide, web cleaning, and corona treatment unit 1 screen printing unit (semi-rotary) 5 offset printing units (semi-rotary) 1 hot foil stamping unit (semi-rotary) 1 additional screen printing unit (semi-rotary) 1 embossing unit (flatbed) 1 flatbed die-cutting unit Matrix stripping and dual rewinding system Upgrade: In 2008, the flatbed embossing unit was added A complete overhaul was carried out in 2017, including full mechanical and electronic refurbishment. Replacement and upgrade of the control system to Version 3

x-travel: --- mm y-travel: --- mm z-travel: --- mm Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Working hours : 134.000 h

Demag Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 2.5 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

2 KEER OP VOORRAAD Capacity: 250 kg

max. workpiece diameter: 500 mm threading length: 5000 mm max. module: 10 min. module: 2 workpiece dia. over saddle: 250 mm center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece spindle bore: 102 mm thread pitch: 1 - 800 mm speed of workpiece (milling): 0,0034 - 2,65 U/min feeds - longitudinal: 0,256 - 195 mm/min feeds - rolls: 0,0256 - 5,17 mm/WU hob turning speeds: 45 - 900 U/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 8,5 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 7,0 x 1,7 x 1,6 m Thread-, Worm-,gear shafts- and Spline Milling Machine with : equipped with: - Thread Milling Head ApGs - Counter Stay - 1 Bush Rest - 2 Steadies - Cabinet with change Gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25311 Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 /min - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Footswitch - Space requirement approx. W 1300 x H 1250 x D 1300 mm - Weight approx. 800 kg - Mobile undercarriage

max. wheel diameter: 250 mm gear width: 242 mm max. module: 4 min. module: 0,5 table diameter: 250 mm table bore diameter: 68 mm milling cutter dia. x width: 130 x 130 mm spindle stroke - max.: 110 mm min. number of teeth: 6 center distance betw. workpiece-tool min/max.: 10 - 210 mm milling spindle speeds (infinitely variable): 80 - 500 U/min feeds axial: 0,32 - 4 mm/WU radial feed: 0,05 - 1,6 mm/WU feeds - tangential: 0,16 - 2 mm/WU Control: LAUER PCS table diameter: 250 mm table hole: 62 mm milling cutter dia. x width: 130 x 130 mm total power requirement: 16 kVa weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x 2,4 x 1,9 m Machine ideal for electrical retrofitting Equipped with: - LAUER PCS NC control - Siemens Simatic S5 PLC - Loading device/magazine for workpiece size max. 140 mm Ø - Shifting - 2-cut cycle The data for this ad was created with ModulMWS - the s ...

turning diameter: 380 mm turning length: 1000 mm swing dia.: 695 mm X-Axis movement: 234 mm Y-Axis movement: 100 mm Z-Axis movement: 1090 mm Minimum indexing C-Axis main Spindle: 0,0001 ° Number of tools on turret: 12 Number of driven tools: 12 x Spindle speed driven tools: 5000 1/min Spindle motor driven tools: 5,5 / 3,7 kW Tool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 4000 1/min spindle motor: 26 / 22 kW spindle bore diameter: 80 mm 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW spindle bore: 80 mm spindle distance: 1005 mm total power requirement: 43 kVA Weight: 6,65 t dimensions of the machine ca.: 5,6 x 1,95 x 1,9 m - Mazatrol SmoothG CNC control - Main and counter spindle - 12-station tool turret with driven tools and Y-axis - 3-jaw chuck -- Main: 10 -- Counter: 6 - Chip conveyor - Coolant system - Extraction syst ...

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS&FREUDENBERG Name: Dewatering screening machine Type: "Roberg" 1000/2500/1 Year of manufacture: unknown Screen length: 1,000 mm Screen width: 2,500 mm

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour frame: Ral 5015 blue Material colour half-timbering: sendz. galvanized Frame profile: PLFB 30 Profile dimensions: P 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,250 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

NEW, felling grab JAK 250 (up to 25 cm), for 5 - 11.5 t excavators,

NEW, 240 cm width, 1.01 m³ capacity, with Manitou attachment, 351 kg dead weight, with 11 teeth

NEW, 250 cm width, 1.05 m³ capacity, with Kramer / Claas Scorpion mount, 364 kg net weight

NEW, width 200 cm, 396 kg net weight, 0.98 m³ capacity, with Komatsu mount

Key data: 380 mm, 1000 mm, 4000 1/min

Stock number: 3961 CNC LATHE Manufacturer: MAZAK, Type: QTN 250-1000L Year of Make: 2004 Specifications: Max. circumferential diameter 380 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1032 mm Main motor power 26 kw Main spindle speed range 4000 rpm Hole through drawing pipe 80 mm dia. X axis movement 230 mm Z ash movement 1000 mm Tool turret with 12 stations Total power consumption 50 kva Control 640 T Nexus Fabr. Spindle Hours 6091 Hours Controlled in X-Z axes Accessories: Hydraulic Main Center Chuck Kitagawa B-212 15X (300mm) mm dia. Various tools pcs. Tool setter Chip conveyance. Length: 3550 mm, Height: 1870 mm, Width: 2000 mm, Weight: 5200 kg

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Offer 25359 Specifications: Cutting range at 90° around 250 mm - flat 275 x 180 mm - Mitre adjustable left Schnittb. at 45° around 200 mm - Schnittb. flat at 45° 190 x 180 mm - Schnittb. flat at 30° 130 x 110 mm - Material support height approx. 920 mm Saw blade dimensions 3100 x 27 x 0.9 mm Cutting speed infinitely variable 15 to 100 m/min hydr. Lifting – lowering the saw frame Upper stroke limit of the saw frame Cutting pressure infinitely adjustable 0 - 10 m/min hydr. Material vise Micro Spray Coolant Device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 2400 x H 1600 x D 1800 mm - Weight approx. 1300 kg - 3 x roller conveyor 1500 mm

Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2008 en verkeert in gebruikte, maar goede staat. Merk: SICA S.p.A Bwj Ud Dotpg Avovycow Type: TRS/SY 32-250 C 2000 Serienummer: 0817501 Bouwjaar: 2008 Spanning: 400 V Vermogen: 6 kW Buisdiameter max. 32 - 250 Ø (mm)

Offer 25369 Specifications: - Max. load capacity with full ballast approx. 250 kg - 4 Vacuum Glass Suction Cups 200 mm - Lifting height in the middle of the top suction cup up to approx. 2.5 m - Separate height adjustment + twisting device - min. construction height approx. 1285 mm - max. overall height approx. 2720 mm - max. total length approx. 2100 mm - min. width approx. 620 mm - Net weight depending on ballast approx. 260 to 410 kg - Charger 220 V - Battery 12 V -Operating instructions

Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.

Safan 2500 x 3 mm Cutting length: 2500 mm Max sheet thickness st 45: 3 mm Max sheet thickness inox: 2 mm

A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

upper amp; lower Wila tooling 5 axes: X / X´ / R / Z1 / Z2 Capacity: 50 ton x 2550 mm Backgauge: CNC Control: TS3 Passage between uprights: 2550 mm Max stroke: 265 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 9 kW Length: 3400 mm Depth: 1850 mm Height: 2820 mm Weight: 5 ton

General SKU209W100 LocationBarneveld MakeDiessel No.95 18 2134 Year of construction1995 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume250 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Capacity343 Ltr. (netto 250 Ltr.) Vessel sizesDia. 742x800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outletcheck25 mm Max. temperature150°C Information Mounted on legscheck wheels Floorspace1,0x0,85 m Total height1,75 m Weight180 kgPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ...

Type: TGL 12.250 Identification number: WMAN14ZZ8LY403440 Last official. Registration number: BKS-HO 66 Drive type: Diesel Emission class: Euro VI;CM,N Power/displacement: 184 kW/6871 ccm Registration date: 22.11.2019 Technical inspection: 08/2025 Mileage according to counter: 89396 Remarks: Condition - very good

General SKU316W638 LocationBarneveld MakeBecker TypeVTLF 250 Mach.No.1408323 Pressure Working pressure0.8 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel Pumpcheck Number of pumps:1 Capacity250 m3/h With motor5,5 kW (400 V, 950 rpm) Inletø 55 mm Outletø 60 mm Information Year of construction1996 CEcheck Floorspace1,10 x 0,65 m Total height0,70 mVacuum pumpsBecker Vacuum PumpsPumps > Vacuum pumpsBrand > Becker Vacuum Pumps What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T529 LocationBarneveld MakeFranken TypePTS 250 No.00625 Year of construction1990 Main Features MaterialStainless steel Capacity7200 Ltr./Hr. Specified Features - Separator Separatorcheck Capacity130 Ltr. InletDN50 Liquid outletDN50 MaterialStainless steel 1.4571 (316Ti) Information Total height1 m Weight160 kg Floorspace2,3x0,3 m Extra SpecificationsOperation pressure: -1/2 bar testing pressure: 2,6 bar operating temperature: 200 °C SeparatorsFrankenCentrifuges > SeparatorsBrand > Franken What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU360W979 LocationBarneveld MakeBüchi No.109900 Year of construction1990 Pressure Working pressure0.4 Bar Vacuum possiblecheck Main Features MaterialGlass Volume25 Ltr. Motor0.35 KW Specified Features - Stirring vessel MaterialBorosilicate Glass 3.3 Closed stirring vesselcheck Capacity25 l Vessel sizesø 300 x 400 mm Dished bottomcheck Outletcheck Max. temperature-50°C/+200°C With propellor stirrercheck Motor0,35 kW (220/380 V 1390 rpm, (Ex)) Speed mixing shaft550 rpm Information Mounted on legscheck wheels With switchcheck Floorspace0,60 x 0,60 m Total height2,0 m Weight120 kg ATEX compatiblecheck Extra Specifications-1bar + 0.4 Bar Double segment stirrer Stirring vesselsBüchiStirring vessels > Stirring vesselsBrand > Büchi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for s ...

General SKU035T174 LocationBarneveld MakeWaeschle TypeDK 8/250 AC No.6721/03 Year of construction1975 Main Features MaterialAluminium/Stainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve MaterialAluminium, Stainless steel 1.4305 (303) Rotary valvecheck Rotary valve for air transportBlow through rotary valve Alu Rotor diameter250mm (stainless steel) Rotor width250mm Number of locks:8 Lock sizes250x70mm Inlet220x180mm Inlet flange sizes325x275mm Outlet220x180 Outlet flange sizes325x275mm Installation height400mm With motor0,55 KW, 220/380 Volt, 1400 rpm Rotor speed33 rpm Outside bearingscheck Air purged sealingscheck Information Floorspace0,7x0,6 M Total height0,5 M Weight125kgRotating valvesWaeschleRotary valves > Rotating valvesBrand > Waeschle What you can expect from Foeth: -- Machine is in working condition -- At a reduc ...

General SKU070X400 LocationBarneveld MakeWaeschle TypeDK-250.1/8-GG No.44533/05 Year of construction1991 Material Housing materialMild steel Rotor materialMild steel Main Features MaterialMild steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve MaterialMild steel Rotary valve for air transport(1x) Rotor diameter250mm Rotor width200mm Outletdia. 70mm Outlet flange sizesdia. 135mm With motor0,55 KW, 220/380 Volt Information Floorspace0,7x0,6 M Total height0,6 M Weight175 KG Extra SpecificationsMax 60 degr CRotating valvesWaeschleRotary valves > Rotating valvesBrand > Waeschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...

General SKU396U1165 LocationBarneveld MakeGerteis Maschinen Processingeneering AG Type1-W-POLYGRAN 250/240 No.1065 Year of construction1997 Main Features MaterialStainless steel Width230 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 240 x 230 mm Sieve sizesdia. 250 x 230 mm Sieve perforation1,5 mm With hoppercheck 50 ltr. InletDia. 315mm Motor400 volt (servo motor) With variable speed drivecheck Speed20-180 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Mounted on wheelscheck rail system With switchgearcheck Weight520 kg CEcheck Floor space1,30 x 0,85 m Total height1,60 m Extra SpecificationsSpeed left and right 20-180 rpm, typical 75 rpm, rotation angle left and right 0/720 degrees, typical 270 degrees. Sieve granulatorsGerteisSieves > Sieve granulatorsBrand > Gerteis What you can expect  ...

General SKU274U477 LocationBarneveld MakeVib Tech TypeSO 219/2500-UA Year of constructionunknown Main Features MaterialStainless steel Length2950 mm Width200 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter200 mm Feeder length2950 mm Closedcheck Inlet640x330 mm Outletdia. 180 mm With vibro motor0,4 kW, 230/400 Volt, 1460rpm (2x) Information Mounted on framecheck Floorspace2,8x0,8 m Total height1,8 m Weight600 kgVibro feedersVib TechConveying systems > Vibro feedersBrand > Vib Tech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU200W913 LocationBarneveld MakeInotec Year of constructionUnknown Main Features MaterialStainless steel Volume250 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity250 l Vessel sizesDia. 500x1600 mm Dished topcheck Dished bottomcheck Top connectionscheck OutletDN15 Information Mounted on legscheck Floorspace0,70x0,70 m Total height2,50 m Weight140 kg Extra SpecificationsWith pressure meterVertical tanksInotecTanks > Vertical tanksBrand > Inotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU200W912 LocationBarneveld MakeInotec Year of construction2018 Main Features MaterialStainless steel Volume250 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity250 l Vessel sizes⌀ 500x1600 mm Dished topcheck Dished bottomcheck Top connectionscheck OutletDN15 Information Mounted on legscheck Floorspace0,70x0,70 m Total height2,50 m Weight140 kgVertical tanksIntotecTanks > Vertical tanksBrand > Intotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU418W1323 LocationBarneveld MakeGab Neumann TypeG3-400/250/80-4/10-D No.15754-12721 Year of construction1985 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface2.48 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface2.48 m² Tube capacity17 l. Max. temperature-30°C/+80°C Shell capacity17 l. Shell diameter500 mm Shell length615 mm Max. temperature-30°C/+180°C Shell connections2x dia. DN50, Information Total height1,50 m Weight340 kg Floorspace0,70x0,70 m Technical specs Extra informationVolume 17 l., allowable pressure-1/+3 bar, allowable temperature-30°C/+180°CShell and tube heat exc ...

General SKU417W1318 LocationBarneveld MakeLauda Type2ITH350/25KW Mach.No.HKS09028 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity59.5 KW Temp.250 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Thermal oil heatercheck Heating medium:Thermaoil ADX10 Heating capacity2x 25 kW Electric capacity59,5 kW With coolingcheck (external cooling, no cooling compressor) Temperature+20°C/+250°C Tank capacity50 l. With pumpcheck (2x) Capacity2x 1,2m³/h Motor4,0 kW 400 V, 2900 rpm (2x) With temperature controllercheck With controlcheck Information Year of construction2009 Mounted on wheelscheck With switchgearcheck Total height2,40 m CEcheck Floorspace0,70x1,20 m Weight700 kg Extra SpecificationsWith horizontal pressure vessel, volume 50 l., work pressure -1/+3 bar, test pressure 5,8 bar,  ...