25 mw used for sale

Manufacturer: HEIN Type: CFR-210-255 SN: Device 1: FR-210-112 Part Number: 080996-1 / Device 2: FR-210-112 Part Number: 080996-2 Year of construction: 2009 Width 2.25m Height 2.5m Length 2.1m

Tailstock, counter bearing for dividing head, dividing head -Peak height: 255 mm -Recording: MK4 -Dimensions: see drawing in the images -Dimensions: 600/220/H410 mm -Weight: 84 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: ZF/hurth forklift drive HFK 250 -Wheel mounting: Dimensions see pictures -Bolt circle: Ø 270 mm M12 -Dimensions: 700/330/H285 mm -Weight: 69 kg

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: with pressure plate, stroke 250 mm -Print plate: 200 x 140 mm -Cylinder: outside Ø 90 mm -Mount: bolt circle Ø 157 mm -Number: 4x cylinders available -Price per piece -Dimensions: 605/200 / H200 mm -Weight: 40 kg / pc.

Drum screening machine with conveyor technology Drum 7000 x 2500 mm, screening fine fraction and 100 x 100 mm fraction Discharge of fine fraction by means of screw conveyors Discharge of oversize particles by means of belt conveyor

Qty. 1 Second-hand filtration line Mfc.: Schenk, Anton Paar, Alafa Laval, Gross, Niwa, Pro-Wam Built: 1992 – 2014 Capacity: 250 hl/h

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Admission: thread, dimensions see drawing in the photos -Dimension: Ø 250 x 85 mm -Weight: 9.3 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, charging cable -Charging cable: for electric forklifts -Type: 3R-W Arcoflex 50 -Length: 2520 mm -Weight: 3.1 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 -Passage: Ø 76 mm -Dimensions: 300/300/H mm -Weight: 40 kg

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Machine vise, sturdy vise, drill vise -Jaw width: 296 mm -Back height: 50 mm -Clamping range: 255 mm -Dimensions: 600/300/H155 mm -Weight: 89 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Hole circle: Ø 230 mm -Weight: 24 kg

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

pressure: 2500 t table length: 5200 mm table width: 2300 mm PRESS FORCES: • CAPACITY : 2500ton • Point pressure capacity: • - Upper 1600t • - Down 900ton • Slide stroke: 650mm • Slide adjustment: 225mm • Slide stroke number: continue 9~25spm • Die-height: 1250mm • Slid size(LxR ,FxB): 5400x2400mm • Bolster size(LxR, FxB, T): 5200x2300x200mm • Balance capacity: 30ton • Main motor: DC 355kw • Feed back(bolster upper side): 700,780mm • Feed back stroke : 550,700,1000mm • Cramp stroke : 0-250mm • Lift stroke: 0~150mm • Transfer inner size(cramp): 650~2200mm • Die cushion capacity • No.1 station 120ton • No.2 station 80ton • No.3 station 60ton • No.5,6,7 station: 5ton • Stroke: 200mm • Bed size: 480x1780mm • Stop time: 430ms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

Industrial Ethernet switch, network switch, LAN switch, rail switch -Manufacturer: Avantech, EKI Switch -Type: EKI-2525-AE -Outputs: 5 -Voltage: 12-48 VDC -Dimensions: 100/35/H150 mm -Weight: 0.6 kg

Gantry milling machine GMB 2560 CNC Manufacturer: Fermat GC: 2023 Control Heidenhain ... TNC 640 Table dimensions ... 6000 x 2500mm Axis X ... 6000mm Distance between stand... 3200mm Passage between .dem table and crossbar... 1900mm ISO 50 Spindle speed ... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power ... 41kW Rapid traverse... 10m/min Total Power Requirement ... 83kVA Average of the grinding piece ... 500x450mm The machine is in good condition, possible to test under electricity.

Used stainless steel ribbon mixer. Capacity 250 liters. The mixer with a double ribbon agitator.

Used machine for crispy cakes, pressed from roller Saixin 250. Set mixer + roller machine + electric oven belt width 250 mm.

used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Festo, standard cylinder type DSNU-20-25P-A -Stroke travel: 25 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm -Price: per piece -Quantity: 6 pieces -Dimensions: Ø 36 x 160 mm -Weight: 0.2 kg/piece

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-50-250-PPV-A -Stroke travel: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm/M16x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 430/65/H65 mm -Weight: 2.4 kg/piece

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 13 mm -Dimension: Ø 250/H25 mm -Weight: 7.1 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm

SPECIFICATIONS: Load capacity kg: 250 Chain length mm: 3500 Complete with remote control

Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 250 mm -Flange: Ø 310 mm / bolt circle Ø 286 mm -Hose length: 155 mm -Number: 3x nozzles available -Price per piece -Weight: 1.5 kg / pc.

Bracket, holder, support block, retaining support -Bracket: height adjustable -Threaded rod: Ø 45 mm -Dimensions: 255/152/H225 mm -Weight: 10.7 kg

Banding machine for folding boxes incl. inline feeding system, stacking device, PLC ELAU, type PacDrive Max-4 etc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 250F LV429372 -Rotary drive with: extension -without: button -Dimensions: 190/105/H575 mm -Weight: 3.0 kg

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

Table saw, aluminum profile saw -2x saw: Wegoma TS 250 -Fixed cutting distance: approx. 450 mm -Saws: individually or simultaneously controllable -with: foot switch -Saw blade: Ø 250 mm -Voltage: 220/380 V -Saw motor: 0.75 kW -Dimensions: 850/790/H1660 mm -Weight: 234 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 232/Ø 12 mm -Dimensions: Ø 250/H26 mm -Weight: 5.6 kg

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Z-roll forming machine for sheet metal of ventilation duct production max. 1.0 mm sheet thickness 2500 mm sheet width

Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11700 ( 3 ...

Gear motor, offset gear motor, electric motor, three-phase motor, electric gear motor -Speed: 104 rpm -Power: 4 kW -Motor type: SK 112M/4 -Construction: B3/B5 -Shaft: Ø 30 x 70 mm -Protection class: IP 55 -Dimensions: 550/285/H260 mm -Weight: 49 kg

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 170 mm -Dimensions: Ø 250/38 mm -Weight: 9 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 250 mm -Cone diameter: 140 mm -Weight: 13 kg

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Heidenhain RON 255 C-18000 ID.-No. 358 697-70 Incl. test report from Heidenhain Replacement part not required