25 mw used for sale

Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016  ...

Dimensions (L/W/H): 2600x700x1900 mm Weight: 300 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2960x1500x2000 mm Weight: 4000 kg Total power requirement: 19,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3600x1650x2150 mm Weight: 6500 kg Total power requirement: 52 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dematic Conveyor Roller Conveyor 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Siemens Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) roller width (RB): 540 mm roller pitch: 62,5-125 mm variable drive types: none or head and center drive weight of conveyed material: up to 30 kg The following accessories are optionally available e.g.: Motors with and without frequency inverter of the brand SEW Eurodrive / Movimot. supports side guides Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope of delivery: without supports and side guides F ...

Type: KH-2580 Producer: Thermokey Serial numb.: R120398900 Created: 2012 Max pressure: 30bar mail adress.: zuzana.novotnanovotny-chlazeni.cz

Dimensions (L/W/H): 8500x1800x2150 mm Weight: 6000 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

Dimensions (L/W/H): 3750x1400x1750 mm Weight: 1600 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1220x1300 mm Weight: 1050 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX610 Profile Dimensions: 76.2 x 63.2 x 1.8 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 2,250 mm Depth: 1,050 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 6 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 84 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 5 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 70 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 4 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 56 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg

Key data: 2500 mm, 521 , 55

Screw diameter: 55 mm Injection weight in polystyrene: 521 g Clamping force: 2500 kN Screw diameter: 55 mm Stroke volume: 570 cm³ Injection weight in polystyrene: 521 g/hp Injection pressure: 2,470 bar Clamping force: 250 t Lights Tie bar spacing H x V: 630 x 630 mm Tool installation height - min.: 300 mm Opening distance: 550 mm Microprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.7 x 2.1 x 2.3 m Payment terms: 100 % before taking over the machine, net only

; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060

Flywheel size: SAE4, 2 units available; Gross weight [kg]: 87; Accessories: Including: 3 current transformers

; Gross weight [kg]: 652

; Engine: Cummins 6BT5.9-G1; Accessories: Tanker, Battery, Control Panel, Stahldach

IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...

EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...

; Gross weight [kg]: 730; Engine: Kubota V2403-M-DI-BG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 110

CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe  ...

turret of a Boehringer lathe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10142 Manufacturer: TIBO Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

Ref. -No.: 10317 Manufacturer: NOSOTTI Type of control: Digitalanzeige - Mini wizard Control: Konventionell Storage location: Halberstadt Country of origin: Italy Tip length: 3000 Centre Height: 260 mm

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-250-PPSA-N3 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 610/55/H55 mm -Weight: 2.2 kg

Ref. -No.: 10229 Manufacturer: GÖPPINGER Year of construction: 1953 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Deutschland Machine length: 4700 mm Machine width: 1450 mm Machine Height: 1300 mm Weight Of The Machine Ca.: 3,1 t Supply voltage: 380 V Turning Length: 3000 mm Turning Diameter Over Bed: 530 mm Centre Distance: 3050 mm Swing Diameter Over Bed Slide: 305 mm Spindle Bore: 58 mm Total Power Requirement: 5,5 kW Circulation in the crank: 720 mm

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 91 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Weight: 47 kg

Manufacturer: HEIN Type: CFR-210-255 SN: Device 1: FR-210-112 Part Number: 080996-1 / Device 2: FR-210-112 Part Number: 080996-2 Year of construction: 2009 Width 2.25m Height 2.5m Length 2.1m