25 mw used for sale

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

LHS-Lagertechnik GmbH sells products for the warehouse technology sector. We offer new and used shelving systems, as well as used lifting and lifting equipment. In this ad, you will buy as follows: - Used pallet truck - Manufacturer: BT - Type: LPE 250 - SN: 6450268 - Year of construction 2016 - Hours: 3196 h - Load capacity: 2500 kg - Lifting height: 200 mm - Fork length: 2350 mm - Operating length: 3050 mm - Operating length incl. platform: 3550 mm - Operating width: 730 mm - Battery 24 Volt ! Year of construction 2021 - External 24 volt charger NEW UVV test, but sale without guarantee and warranty because used device Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please inquire about your transport costs. Errors / prior sale of used goods expressly reserved.

LHS-Lagertechnik GmbH sells products for the warehouse technology sector. We offer new and used shelving systems, as well as used lifting and lifting equipment. In this ad, you will buy as follows: - Used pallet truck - Manufacturer: Toyota - Type: LPE 250 - SN: 6681770 - Year of construction 2019/07 - Hours: 5830 h - Load capacity: 2500 kg - Lifting height: 200 mm - Fork length: 2350 mm - Operating length: 3050 mm - Operating length incl. platform: 3550 mm - Operating width: 730 mm - Battery 24 Volt ! Year of construction 2021 - External 24 volt charger NEW UVV test, but sale without guarantee and warranty because used device Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please inquire about your transport costs. Errors / prior sale of used goods expressly reserved.

Used Stork Wolf model MRS-2500.

For sale is a workshop-overhauled and function-tested, free-standing VA diatomaceous earth dosing device. The device is immediately ready for use. Specifications: Manufacturer: Schenk Year of manufacture: unknown Type: DO-S-250 Boiler capacity: approx. 250 l (with lid almost 1/2 hinged with hinge) Hourly output for KG filtration: 200 hl for beer, wine and fruit juice Dimensions total: L max. = 1.20 m / W max = 0.80 m / H max. = 1.685 m Beer pipe: Input/outlet DN 50 KM/G - Dosing connection in the beer pipe DN 25 KM Connections in the boiler: 1 inlet at the top side DN 50 G with 90-degree bend (inside) downwards 1 remaining outlet DN 50 G with shaft closure and handle from above 1 connection DN 32 KM above 1 DN 50 KM connection at the bottom side with a 90 degree bend upwards - then reduced from DN 50 to DN 10 G Boiler dimensions: Diam. inside = 0.65 m ...

Key data: 490 mm, 1120 , 990

Machine type: EVP 250 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP 250 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may ...

USED SIHI ZSKQ 2501 DN90L-2 REFRIGERATED CENTRIFUGAL PUMP

Belt round knitter Kemper SBR-2500 Kemper belt round knitter with 2500mm long belts, with flour spreader.Speed adjustable via pot, machine can be moved on rollers, height adjustable. The machine is visually and technically in good condition, can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.

PART NUMBER: 7545 Specifications: - Track width 250mm - shaft width 220mm - max disc diameter 300mm - blade hole diameter 60mm - cutting height 100mm - table top width 650mm - table top length 1460mm –in advance: - 2 rows of ratchets - smooth sliding shaft - shaft with saws - smooth, sliding shaft – from below: -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - central lubrication - feed motor 1.2kW - main motor 21kW - extraction spigot diameter 180mm - total dimensions length/width/height 1700x1450x1500mm - weight about 1800kg ADVANTAGES – Italian production – DTR documentation – a solid machine – used multirip saw, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

Laska Mixer Type ME 250 Vacuum Z Arm Mixer Kneader Filling quantity approx. 180 KG

Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer

Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...

PART NUMBER: 7544 Specifications: - Track width 250mm - working width of the shaft 220mm - max disc diameter 300mm - blade hole diameter 60mm - max cutting height 100mm - width of the table top with extension 560mm - table top length 1580mm –in advance: - ratchets 2 rows - Slip roller, metal, pressure roller - shaft with saws - smooth, metal, slip roller – from below: - slip roller - guide strip -Triggers -caterpillar - central lubrication of the track - smooth speed control on the inverter - feed motor 1.5kW - main engine 15kW - extraction spigot diameter 170mm - total dimensions length/width/height 1950x1500x1600mm - weight about 1800kg ADVANTAGES – Italian production – central lubrication of the track – very good condition – used multi-rip saw Net price: 33900 PLN Net price: 7884 EUR depending on the price of 4.30 EUR (Pric ...

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmMax. torque (40% DC)525 NmTorque (100% DC)410 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Y-Axis PartingTechnology cycle to parting off the workpiece by the Y-axis to ac ...

The generator has never been used before. The device is water-cooled. Further details: see nameplate. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

High-performance flue gas fan very good condition closed wing for high pressure 15kW V-belt transmissions

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmMilling spindle upper side1 Bar diametre80 mmSpeed max.4000 rpmMax. Turning Length1530 mmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmWeight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

Suction fan S 250 Motor power 5.5 KW 400V Air capacity 6700m³/h

Backflow preventer, Check valve, Reto Stop, DN 250, PN10, VAG, new -20% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is € 3,022 excl. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! Manufacturer date 2018 The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. Soft-seated slanted check valve opens already at small differential pressures. Valve disc can be used on both sides, therefore double service life of the valve disc. The one-piece and all-around EPDM rubberized disc allows a completely free passage and reduces the adhesion of impurities. Suitable for both horizonta ...

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: kW weight of the machine ca.: 0,35 t The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1

Warehouse number: 3691 CNC ROTARY TABLE Manufacturer: Hydex, Type: AT-250 - 5 Axis Year of construction: 2022 Specifications: Table size 250 mm Center Height 320 Spindle hole 75H7 mm CNC control 2 ashes revolutions 50 per min Control Fanuc-Mitsubishi-Siemens-Heidenhain

Key data: 1000 , 89 , 30

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...

Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

SPECIFICATIONS: TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530 plus) Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts sheet thickness of mild steel: 20 mm sheet thickness stainless steel: 15 mm sheet thickness aluminium: 10 mm STANDARD: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Spraying device - Motion unit for high-precision machining - Additional highly dynamic axis Yp - Drives with maintenance-free three-phase servo motors - Closed beam guidance - Conveyors for small parts and waste - NitroLine - FlyLine - Penetration detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Logbook function laser CUTTING HEAD: - Laser cutting  ...

diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;

Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm

Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 2,550 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.

weight max. in kg: 2500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V / 205AH LI-ion weight of the machine ca.: 3,9 t dimensions of the machine ca.: 3,57 x 1,15 x 2,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marble plate STOLLE Length: 3500 mm Width: 2500 mm Thickness: 305 mm Height on feet: 900 mm Delivered with 12 levelling feet Weight: 6,3 T

Schaudt ZX11 - Premium Overhauled [RETROFIT] - CNC grinding machine for individual requirements - Tip height: 180 / 250 mm - Grinding length: 2,500 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 600kg - Workpiece headstock: MK5 - Tailstock: MK5 - Installation dimensions: approx. 7,200x2,600 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request

Tetra Pak TBA 19 250ml Base Filling Line Item #: Usm-169 Category Tetra Pak TBA 19 One Tetra Pak TBA 19 250ml Base Filling Line For Sale TBA 19 250ml Base Filling Machine, Version 30v Straw Applicator TSA 21 Packer TCBP 70 Conveyors & Paper Trolly Condition: Good

Water pump Sludge pump / excavator pump Manufacturer : Habermann Model : KB 250 S III The pump is revised and in perfect condition for more information see pictures. Internal number: 601 979

Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

; Gross weight [kg]: 12350; Engine: QSK50-G17; Accessories: Battery, Control Panel, Incl. coolant heater and battery charger

; Gross weight [kg]: 16160; Engine: Cummins QSK60-G4; Accessories: Battery, Control Panel, Including heater and battery charger

For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.

Machine Details Warehouse number 1105-03719 Machine type CNC lathe - inclined bed machine Brand KITAMURA Type KNC 250 YS Year of construction 1999 Control type CNC Control Fanuc 18 IT Storage location FRANCE Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock HAGUENAU FRANCE Technical details Turning diameter 280 mm Turning length 270 mm Control Fanuc 18 IT Rod passage: 42 mm Speed range - spindle 5000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - seats: 12 stations Tool holder direct holder Total power requirement 20 kW Machine weight approx. 4.5 t Space requirement approx. 2900x2100x1800 mm Accessories 3 - Baking - Food YES Complete machine documentation YES Chip conveyor YES Parts catcher YES Collet device YES Electronic handwheel YES Co ...

We offer Peri Pep 30-250 galvanized, used - including original Peri stacking pallet. Special offer 42 x Peri ceiling props including frame = 1.218,00€ 42 pcs PERI Ceiling Prop PEP 30-250, galvanized, used 1 pc. Peri Pallet RP 0.80 x 1.50m galvanized, used The PERI PEP slab props are particularly characterized by their high load-bearing capacity and low weight. Due to a 100% hot-dip galvanizing, the tubular steel ceiling column has a long service life. The risk of injury is significantly reduced by a built-in crush protection of 10 cm. Due to the large adjustment range of 12 cm, frequent replugging is no longer necessary. The high-quality forged nut with hardened contact surface and two-way thread make loosening under full load much easier. All supports are checked and sorted - immediately ready for use. Only while stocks last. Subject to prior sale. If you have  ...

Diesel Fuel Tank 2000 Liter, 2.000 Liter Tank, Western Global 20TCC; Gross weight [kg]: 698; Accessories: 2x in stock

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts a h ...

Key data: 200 KW, 250 kVA, 400 V

MODEL: EQ-D250200 ENGINE: Deutz BF6M1015C-LA G1A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3300kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...