126,612 used machines on RESALE, but how to find them? Machine Search
An HMS punching machine is available. Pressing force: 250t, stroke height: 40mm, installation height: 450mm, ram adjustment: 20mm, stroke rate: 120 strokes/min, overall system dimensions X/Y/Z: approx. 17000mm/8000mm/3500mm. Including coil and strip processing. Documentation available. On-site inspection is possible. Expected to be available from September 2025.
cutting width: 150 mm machine weight ab.: 300 kg : 27468 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg
Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 20 kg
Load capacity: 25t, center of gravity distance: 700mm, eccentricity: 250mm, speed: 0.66rpm, tilt range: 0°-130°, tilt time: 120s, table height (flat): 1930mm, axis of rotation height: 1600mm, table diameter: 2500mm, motor power tilt/rotate: 7.5kW/4.5kW, total length: 3000mm, total width: 2500mm. Documentation available. On-site inspection is possible.
: ja vice: 1 quill stroke: ja : : 2.000 mm weight of the machine ca.: 790 kg strong material: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.
workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible.
max. wheel diameter: 2500 mm gear width: 1200 mm max. module: 32 min. module: 3 total power requirement: 25 kW weight of the machine ca.: 60 t dimensions of the machine ca.: m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: Hydrostatic guides in grinding slide, table and in all other guideways. Completely covered working area with sliding doors. Automatic grinding process for various cycles, with ...
Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min
max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.
Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.
: M01.43870 frequency: 50 Hz voltage: 400 V : 24 V connected load: 48 kW rated current: 63 A control: Siemens 840 D turning diameter: 250 mm turning length: 100 mm weight of the machine ca.: 7,5 t turning length external: / innen 100 mm workpiece length - min.: 29 mm workpiece length - max.: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...
turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, ...
honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...
core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed ...
faceplate diameter: 2500 mm swing diameter: 2865 mm turning height: 3000 mm Control: R & D type: MTC 4 Rest: 2 slide adjustment: 1500 mm turning speeds: 140 U/min tool change unit: 12 Pos. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine is modernized The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cre ...
cutting diameter: 255 mm saw band length: 2765x 0,9 x 27 mm cutting width: 300 x 180 mm turning speeds: 35 + 70 U/min total power requirement: 1,8 kW weight of the machine ca.: 450 t dimensions of the machine ca.: 1,7 x 1,23 x 1,75 m SPECIAL PRICE! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3 ...
Saw blade diameter: 255 mm Sawblade tiltable: 45 ° Cutting height: 75 mm Table dimensions: 640 x 920 (ausgezogen) mm Saw blade: 30 mm Motor output: 1,6 kW connected load frequency: 230 V machine weight ab.: 32 kg Dimensions (L/W/H): 720 x 1080 x 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 2,5 kN stroke: 45 mm throat: 90 mm Working height from to: 80 - 220 mm table surface area: 120 x 60 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 250 mm no. of working stations: 2 Stück connected load frequency: 230 V turning speeds: 2850 U/min total power requirement: 1,5 kW weight of the machine ca.: 25 Kg dimensions: 0,65 x 0,32 x 0,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min Control: CNC total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-a ...
grinding wheel diameter: 250 mm connected load frequency: 230 V : 90 - 180 U/min weight of the machine ca.: 18 Kg dimensions: 470 x 300 x 440 m Knife sharpening device with variable speed Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 125 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure: 40 bar Motor: 11 kW Free air delivery: 0,78 m³/min Measurement (WxHxD): 6300 x 1500 x 806 Weight: 490 kg Compressed air connection: 1/2
plate thickness: 3 mm blade length: 250 mm angle adjustable from - to: fest 90 Grad table surface area: 900 x 790 mm total power requirement: kW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 700 mm cutting width: 250 x 320 mm cutting speed: 25 - 90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 120 mm : 120 mm : 190 mm Impact energy: 190 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure: 40 bar Motor: 11 kW Free air delivery: 2,42 m³/min Measurement (WxHxD): 1652 x 1456 x 928 Weight: 662 kg Compressed air connection: 1/2
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adj ...
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 250 mm capacity 90 degrees: round: 80 mm capacity 90 degrees: square: 70 mm capacity 90 degrees: flat: 95x60 mm capacity 45 degrees: round: 70 mm capacity 45 degrees: square: 60 mm capacity 60 degrees: flat: 65x60 mm total power requirement: 1,0 kW weight of the machine ca.: 0,075 t dimensions of the machine ca.: 0,3 x0,8 x0,75 m SPECIAL PRICE! The ideal metal circular saw for workshop and assembly • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Optionally with 230 V or 400 V motor • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Subframe (option) additional price 172,-EUR ATTENTION: Price is without saw blade! (saw bl ...
plate thickness: 8 mm blade length: 250 mm angle adjustable from - to: fest table surface area: 840 x 750 mm total power requirement: 3,0 kW weight of the machine ca.: 1,3 t dimensions: 1,4 x 1,1 x 1,5 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure., Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Grinding wheel holder:: HSK 50 E, Diamond grinding wheel diameter: 50 - 250 mm, max. width of grinding wheel: 70 mm, Grinding wheel bore diameter: 20 mm, Speed of ...
Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories:, Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 19” LCD monitor (microscope with zoom 15‐70X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Protection cover., Specifications: Wheel spindle taper: HSK50E (alternatives possibl ...
For sale is a ProJet 2500Plus from 2017. The device is in perfect condition, test printing is possible (for an expense allowance, which will be offset against purchase)., Accessories: EasyClean System from 3D Systems, second build platform, Technology: MultiJet Printing
Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025.
On behalf of a customer, we are selling a 3D Systems MultiJetPrinter type ProJet 2500Plus in very good condition. The machine was used as a dealer demo machine., The machine has been equipped with new drive belts and new filters. All materials have been removed according to the manufacturers instructions. The machine is empty. The printing time is approx. 1400 hours, 181,000 layers were printed with approx. 24KG of building material and approx. 33KG of support material., Equipment:, - 3D Sprint Basic Complimentary Software (on-line activation), Installation: 2016, Print modes: HD - High Definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on printing parameters, ...
A new belt roasting machine for nuts in the food industry is available. Fuel: diesel/electricity/gas/LPG, output: 2kW, machine dimensions X/Y/Z: approx. 3600mm/1900mm/1950mm, operating hours: 31h. Roasting capacity per hour: hazelnut kernels: 160kg, shelled peanuts: 150kg, shelled peanuts: 35kg, shelled pistachios: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt kettle with a capacity of 35kg and fully automatic high-pressure belt washer. Documentation available. On-site inspection is possible.
current capacity: - kVA throat: - mm contact pressure capacity: - kp total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 1244 CNC portal spot welding machine PEI PROG-2515 Working area: 2500 x 1500 Siemens control Welding capacity of the butt spot welder 3+3 mm Welding capacity of the gun 2+2 mm Feed rates: X+Y 800 mm/sec, Z: 400 mm/sec, A 120°/sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
