25 kv generator used for sale

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

Z-roll forming machine for sheet metal of ventilation duct production max. 1.0 mm sheet thickness 2500 mm sheet width

Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11700 ( 3 ...

Heidenhain RON 255 C-18000 ID.-No. 358 697-70 Incl. test report from Heidenhain Replacement part not required

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

Control: SIEMENS 840D Max.turning length: 1185 mm Max swing diameter over bed/slide: 640 mm/550mm Workpiece diametr: 400/250 mm Material passage through the spindle: 65 mm Max.diameter of the material for barloader: 65 mm Rotation speed(max.) 5000 rpm Sp

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

USED TETRA PAK TBA 19 250ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-188 Category Tetra Pak TBA 19 1-TBA 19 250ml Slim Filling Machine, Year of manufactitng 1999, Version 10v, Speed 7500 PPH 2-Tetra Pak Straw Applicator TSA 46, Year of manufacturing 1997 3-Tetra Pak Cardboard Packer TCBP 70 4-Tetra Easy Ride 5-Conveyors and Paper trolly Condition: Still on production and Tetra pak maintained.

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

1 CALATOR inspection machine for open width knitted fabrics type BSM 2500, roller width 270 cm, working width 250 cm, entry small roll, exit small roll, with LABELTEX 86 type LBTX defect registration unit, with illuminated table

Reimelt Fat Baking Plant/Berlin Plant/Doughnut Plant Type EL 8/2500 Year of construction 2008 Electric heating Manual cloth feeding 8 rows, for products up to 105mm incl. 6 trolleys with sheets and various cloths incl. downstream vaccination station with 4 jam pressure containers incl. steam hood incl. grease level regulator incl. oil tank with heater - Level regulation via weighing incl. extraction hood Bakery condition/immediately available from stock

Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm

Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length ...

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513

Weibert PHW 2508 Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 1150 mm Stroke range 85-200 mm Steering angle 205° Turning radius 1281 mm LxWxH 1550 x 540 x 1235 mm Weight 67 kg G&STÜ-6152512

Weibert PHW 2507L Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 1800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 1790 mm LxWxH 2190 x 540 x 1240 mm Weight 100 kg G&STÜ-6152511

RAANTEC DELTA 250 UV – Converting Year of Manufacture: 2003 ________________________________________ Product Description:  Web width: max. 10 inch – 254mm  1x die-cutting unit  1 x inking unit UV Flexo 1-colour with corona and dust removal  1 set of impression cylinders  Unwinding 850mm  Winding on large roll and small roll possible  Ran all the time only in single-shift operation. Machine Specifications and Equipment: ________________________________________ Accessories Included:  Manuals  Keys  etc. ________________________________________ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) ________________________________________

Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513

Orgapack Cordless Strapping Tool, OR-T 250, Incl. Battery and Quick Positioning Tool

Transnorm Roller Alignment Centering Conveyor 2500-700-600 RA2073 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 700 mm Length: 2500 mm Roller diameter: 50 mm Roller distance:76 mm Drive motor: R17DT71D4/TH Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 2008 nominal voltage: 380-480 V Conveying length in mm: 2500 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simpl ...

Key data: 370 mm, 650 mm, 3500 1/min

Machine Details Stock-No. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex Site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570 mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm Turret (X-Stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM SCHIP CONVoYEUR TOOL SETTER COOLANT INTERLOKED GUARDS

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg

Lippert belt conveyor GF 2500-750-600 RA2261 Technical data: Conveyor length (NL): 2500 mm Frame width (NB): approx. 700 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.37 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2015 condition: good (used) Conveying length in mm: 2500 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten S ...

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

XG-25B industrial furnace is designed to heat a charge placed in an induction coil by means of high-frequency current. In this process, the AC current flowing through the primary coil generates an alternating magnetic field around the charge. This field in turn induces electromagnetic forces in the secondary circuit, resulting in the heating of the charge. This solution makes the XG-25B2 induction furnace much more efficient and economical than other furnaces available on the market. The main power and control components are IGBT and MOSFET components, which enable the unit to operate strictly within the required technical parameters. The offer also includes a water tank, water pump, table and foot switch controller. The electric induction furnace weighs just 26 kg. Technical specifications of the XG-25B furnace - input voltage: 380 V ± 10%; 50/60 Hz - input power: 5-25 kVA - outp ...

Key data: 690 mm, 400 mm, 500 mm

Universal milling machine from WMW, type FW Good general condition Mechanically flawless function Milling Machine - Horizontal Make:WMW Fritz Heckert Type: FW 250x1000/2 Year of construction: approx. 1980 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2,800 net free loading Technical details: x-travel: 690 mm Y-travel: 400 mm z-travel: 500 mm Table Mounting Surface:: 1250x250 max. table load: 1500 kg Spindle speeds:: 18 steps/step 55-2800 rpm Height above floor: 1350 mm Feed rate: 10-630 infinitely variable m/min Tool holder: SK40 Total power requirement: 6.3 kW Machine weight approx.: 2.0 t Machine dimensions LxWxH: L:1.8xW:1.7xH:2.0 m The work table can also be adjusted manually. The projection of the counter-holder boom = 500mm, the total length = 1050mm. with end pos ...

Solid universal milling machine, milling machine from Jarbe with adjustable head in really nice condition Ready for immediate use technically flawless, tested quality The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.

Horizontal Bracket Milling Machine Universal milling machine WMW Heckert FU 250 x 1000 • Table LxW: 1,250 x 335 mm • Spindle: 28 – 2800 rpm • Tool holder: SK 40 • Rapid traverse in: X-Y-Z • 3-axis digital display • Coolant device • Task lighting • Connected load 6 kW • Accessories: according to picture • Dimensions: L x W x H.: 1800 x 1600 x 1900 mm • Weight: 1,700 kg Good condition flawless operation Currently still with 400V collar plug -> will be converted to CEE plug on request Includes a wide range of accessories A function video can be sent via WhatsApp. The machine can be viewed in our showrooms at any time. You are very welcome - metalworking machines and accessories on more than 1000 square meters On-site loading with forklift no problem

sheet width: 0250 mm coil outside dia.: 1800 mm weight max. in kg: 2 x 3000 kg : 3,80 mm : 470 - 530 mm : 21 : 30 mm : 4 : 18,0 kW speed: 20 m/min power capacity: 18 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012

Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

USED TETRA PAK TBA 21 250ML BASE FILLING LINE FOR SALE Item #: Usm-196 Category Tetra Pak TBA 21 -Filler TBA 21 250ml Base, Yom 2003 -Straw Applicator TSA 21, Yom 2010 -Film Wrapper 67, Yom 2004 -Packer TCBP 70, Yom 2007 -Helix 21, Yom 2003 -Conveyors and Paper trolly

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 250 mm 0: 3530 m³/h 0: 2500 pa Dimensions (L/W/H): 3.350x1.020x2.290 mm engine output: 5,5 kW turning speeds: 2800 U/min compressed air: Pmax 8,0 bar weight: 1100 kg Nestro dust extractor NE 250 W For sale on behalf of the customer ex location -------------------------- Manufacturer description: Dust extractor with pneumatic shaking and automatic water extinguishing system Including suction nozzle d=300 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW 400V/50 Hz, on/off switch, potential-free Contact for machine monitoring, motor protection switch, Pressure difference display, 3 mobile dust bins Clamp bracket, 3 chip collection bags (PE) 600x600 mm, i=1100mm Housing made of galvanized sheet steel Technical data: Nominal volume flow 3,530 m3/h associated negative pressure 2,500 Pa Suction side connection d=250 mm Continuous operation mode Type of current: three-phas ...

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...

From operating resolution: MIgatronic PI 250 DC Year of construction 2014 Pulse function HF Ignition Water cooling without function Welding Range: 5-250Amp 250Amps at 30% ED 180A at 60% 150A at 100% 220 volts with 8meter burner (sheathing partially damaged), ground cable and pressure reducer Dimensions in mm approx. 1100x630x720 --Very neat device-

Technical data of the shelf connector: Shelving system: Polypal The scope of delivery includes: 01x Shelf connectors, used for shelf spacing: 250 mm Total length: approx. 310 mm U-profile dimensions: approx. 50 x 15 mm Material colour: sendzimir galvanised Material thickness: approx. 2 mm Drill hole Ø: 10 mm Weight: 0.270 kg | Pcs. Incl.: 02x Screws M10 x 35 mm 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

FRITSCH cone winding machine 250 T, used, technically tested, function tested, partially overhauled with new Teflonized adjustment roller/feed shaft

Transnorm conveyor belt GF 25050-700-600 RA2152 Technical data: Conveyor length (NL): 25050 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 25050 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Conveyor speed m / s: bitte Kontaktieren scope of de ...

Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC ...

HOVAP AP-Z-2550 Self-priming centrifugal pumps YOM: 2002 5.5 KW 2925 rpm 30m3/h Two pumps available Excellent working condition

DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz  ...