2000 ton hydraulic used for sale

Hydraulic single column press make HENSELER type PYE 6,3 x 200 SMachine -No: 136 built in 1969Compressive force: 6.3 tPressure force on: 3.5 tRam speed from: 120 mm / sec.Ram speed to: 220 mm / sec.Projection: 200 mmStroke: 315 mmPiston diameter: 80 mmInstallation height: 500 mmTable height: 800 mmTable surface: 380 x 420 mmTable hole: 100 mmPusher bore: 32 x 60 mmOil filling: 120 lOutside dimensions approx: 650 x 1100 x 2100 mmDrive power: 4.0 kWWith- Two-hand release- Press time adjustment- Pressure control- Hand lever operation- pneumatic hold-down- Speed control by hand lever in setup modeused, despite the year of construction in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

Width of jaws: 160 mm Price on request.

Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. High-speed single-column press Fabr. DUNKES type HZS 40Machine -No: H 77-581, built in 1981Press force: 40 tOperating pressure: 270 barStroke: 150 mmInstallation height: 400 mmOutreach: 280 mmRapid traverse: 400 mm / sec.Rapid traverse to: 400 mm / sec.Pressing under full load: 14 mm / sec.Table height: 820 mmTable surface: 600 x 515 mmDiarrhea hole in the table: 100 mm Drm.Drive power: 7.5 kWWeight: 3.1 tOil filling: 230 lExternal dimensions: 850 x 1200 x 2390 mmWith- Cutting impact damping- Safety 2-hand control- self-holding with rapid traverse shutdown- Electric return stroke limitation- Setup tip circuit- Fully automatic workflow- Emergency stop switch- stepless force preselection- graduated Adj. mech. depth stop- Switching in the lower stroke rangexa0xa0xa0 Lift and time changeoverxa0xa0xa0 Lift and pressure changeover- separate hydraulics for drawing cushionsused, in good co ...

No. 4105: 1 gebr. Hydraulic riypress Fabr. G + K, type SI 40/50, Bauj. 2000 Accessories: Table 500 x 400 mm Other: Pressure force max. 600 kN Impact stroke 150 mm Weight approx. 4500 kg

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

Hydraulic pump set Sauer-Sundstrand Model Code MPV 035D AABDDLA Type BAGRSGAA FFDNNN Model No. 4352025 A98-44-29352 with flanged gear pump made in UK

2 column hydraulic press #5232 Press force: 200 t upper stroke: 500 mm lower stroke: 200 mm overall dimension: 1800x2200x3700 mm Power: 10 PS Weight: 8.4 t

Hydr. Sheet Metal Shear Make MENGELE Type S 4 - 5000/3Machine -No: S 2237 5000/3 Year 1976Cutting length: 5050 mmMax. Sheet thickness: 3.0 mmlateral. Discharge: 300 mmCutting angle: 0.6 °Strokes per minute: 34Number of hold-downs: 22mot. backgauge: 0 - 1000 mmlateral. Angle stop: 2000 mmOperating pressure: 230 barHold-down pressure: 58 barOil filling: 200 lDrive power: 11 kWOutside dimensions approx: 5750 x 2500 x 1700 mmWeight approx: 15 tWith- mot. backgauge- Angle stop front- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheat metal Shear make EHT type EHS 6-50Machine -No: 19782 Year 1983Max. Sheet thickness: 6.0 mmCutting length: 5050 mmKnife length: 5100 mmCutting angle: 1 - 15 °Knife strokes per minute: 18Number of hold-downs: 26Pressure p. Hold down: 60 barOperating pressure: 280 barOil filling: 220 lDrive power: 12 kWWeight approx: 11 tOutside dimensions approx: 5500 x 2900 x 2100 mmWith- mot. back gauge 1500 mm with length indicator- Cutting angle indicator- Cutting angle adjustment- Cutting length limit- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make LOTZE type TS 3000/5machine -No: 2623003 year 1975Technical specifications:Max. Effective length: 3040 mmMax. Sheet thickness steel: 5.0 mmMax. Sheet thickness stainless steel: 3.0 mmOutside dimensions approx: 3750 x 1255 x 1600 mmWith- motor backgauge with handwheel fine adjustment- Cutting length limit- Angle stop front- Table extension- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic swing cut guillotine shears make HERA type HSS 3Machine -No: 557 built in 1984heavy, unbreakable all-steel designTechnical specifications:Passage: 1100 mmLarge sheet thickness at 400 N / mm 2.0 mmThroat: 200 mmNumber of strokes: 56 H / minStop length at the front: 1000 mmStop length at the back: 1000 mmMotor power: 2.2 kWWeight about 1500 kgDimensionswith- motorized backgauge- foot switch- front support arms- hydr. Hold-downused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.

Description Table shears from Weipertsuitable for tools, fixture construction, training and mould making Cutting length 3200mm Sheet thickness 16mm Technical data Sheet thickness (max.) 16 mm Working length 3,080 mm Extension 150 mm Cutting angle 0.3 - 2.5 degrees Strokes per minute 14 h/min Holder 18 pieces Holder pressure capacity 40 t Table dimensions 3.380x550x840 mm Backstroke Backstop depth 1,000 mm Front support arms Number of support arms 3 pieces Length of support arms 900 mm Drive power Engine power main drive 37 kW Hydraulic oil tank volume 350 l Dimensions and weights Dimensions (length x width x height) 4x2.2x2.42 m Weight 15.300 k

Description Universal cold circular saw machine from eisele brand suitable for small and large series Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown Technical data -Saw blade diameter: 450 mm -Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown -Drive: 3/3.6 kW -with: coolant device -Cutting range at 90 degrees Round: 145 mm -Cutting range at 90 degrees square: 130 mm -Cutting range at 90 degrees flat: 240 x 70 mm -Cutting range at 45 degrees Round: 145 mm -Cutting range at 45 degrees square: 125 mm -Cutting range at 45 degrees flat: 170 x 70 mm -Cutting range at 30 degrees Round: 120 mm -Cutting range at 30 degrees flat: 120 x 70 mm -Profile size: max. 320 x 30/280 x 80 mm -Dimensions:  ...

Sheet thickness: 4,5 mm Bending length: 1000 mm Number of rolls: 3   Rolling width:                 1000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  3mm Top Roll Ø:                    110mm Bottom Roll Ø:                 110mm Side roll Ø:                   110mm Number of rolls:               3 Rolling speed:                 5 Power:                         4kW Length:                        1500mm Width:   ...

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

pressure:100 t passage width:500 mm stroke:400 mm weight of the machine ca.:5 t dimensions:1300 x 2800 x 2900 mm Approaching Speed max. :90 mm/sec pressure speed:4-12 mm/sec Travel:400 mm pestle plate:700 x 500 mit T-Nuten mm table plate:700 x 500 mit T-Nuten table height over floor:850 mm Oil Tank Capacity:140 l Return Speed:100 mm/sec Main cylinder:1 Stück Cylinder diameter:220 mm Auxiliary cylinder:2 Stück Auxiliary cylinder diameter:50 x 30 mm Engine Output:11 kW pump:23 l Light sensors sick:600 + 150 mm Monitor:7 Zoll

pressure:500 t passage width:1600 x 1300 mm stroke:1100 mm Table size:1600 x 1300 mm open height:1700 mm Press speed:25,2 - 9,4 mm/sec Approach Speed:300 mm/sec return speed:200 mm/min machine dimensions LxWxH:2800 x 1800 x 7200 mm Weight (approx.):55 t Description of the press frame The frame is designed as a frame construction with 2 operating sides. It consists of highly dimensioned braces, which are tightly and rigidly welded with upright steel ribs. The complete welding part is processed on precision machines. As a stiff box construction. The underside of the box is formed by a solid welded steel plate, which is prepared for the assembly of insulation and heating plates. The complete welding part is processed on precision machines. Integrated guide and cylinder connections in a power optimised design. Plunger Guide The plunger is guided diagonally through a prism guide, i.e. the ang ...

pressure:60 t passage width:800 x 700 mm stroke:200 mm total power requirement:11 kW control:Automatik über Zweihandbedienung :2 / Durchmesser 40 x 25 mm Stück :28,5 Lt./min. :700 mm :800 mm pre-running speed:121 mm/sec :13 mm/sec return speed:160 mm/sec :0 bis 60 sec :2 bis 121 mm/sec. :max. 9,5 mm/sec Capacity:20T Leistung 200 mm feed down:70 mm/sec

pressure:650 t passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Used KLAUKE HK 12/2 EL / HK 25/2 EL Hydraulic pump press pliers Connection 400V 16A Press pliers Klauke PK 120 Pressing range up to 400mm² C-head with 42mm opening width For Series 13 Press Inserts Without pressing insert Good condition. Fully functional See pictures Original price complete approx. 7000.-Euro gross Viewing and pick-up possible Shipping Germany (without islands) 119,00 Euro including 19% VAT The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 The price includes 19% VAT. You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

pressure:100 t passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2800 x 2900 mm Table size:800 x 500 mit T-Nuten mm Table height above ground level:850 mm Oil Tank Capacity:140 l main cylinder:220 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :26 Lt./min. Approach Speed:110 mm/sec Pressure Speed:120 mm/sec Return Speed:12 - 4 mm/sec Ram plate:800 x 500 mit T-Nuten mm pre-run valve:1 Stk Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:700 + 150 mm Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

pressure:40 t passage width:2500 x 1300 mm stroke:1000 mm total power requirement:7 kW weight of the machine ca.:12 t draw back pressure:4 t Controll:Zweihandbedienung cylinder:1 work height max.:2200 (zwischen Stößel und Tischplatte) mm working area:2500 x 1300 mm Table dimensions:2800 x 1300 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec Oil Tank Capacity:150 l

pressure:160 t stroke:600 mm total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm table load:5 t pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec quantity of oil:220 l

pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

pressure:40 t stroke:500 mm total power requirement:5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:2950 x 1300 x 2000 mm return capacity:6 t work height max.:700 mm pre-running speed:250 mm/sec :20 mm return speed:200 mm/sec pestle plate:500 x 400 mm table plate:600 x 450 mit T-Nuten mm Table cut-out:150 mm Durchmesser table height:1000 mm :200 l Oil Cooling:elektrisch light-barrier:700 mm

pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

pressure:40 t passage width:2500 x 1300 mm stroke:1000 mm total power requirement:7 kW weight of the machine ca.:12 t draw back pressure:4 t Controll:Zweihandbedienung cylinder:1 work height max.:2200 (zwischen Stößel und Tischplatte) mm working area:2500 x 1300 mm Table dimensions:2800 x 1300 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec Oil tank capacity:150 l

pressure:30 t passage width:1000x1000 mm stroke:800 mm total power requirement:3 kW weight of the machine ca.:5 t dimensions of the machine ca.:3360x1300x1360 mm return capacity:3 t column diameter:75 mm traversing speed:bis 200 mm/sec. :0-10 mm/s :200 mm/sec table height over floor:900 mm distance table - lower edge of ram:1000 mm :126 mm diameter of piston:71 mm

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

pressure:20 t stroke:600 mm table surface area:2000 x 600 mm dimensions:ca. 3500 x 1200 x 2800 mm total power requirement:3 kW pre-running speed:9,9 mm/sec return speed:25 mm/sec Pressure power:180 bar :100 l weight of the machine ca.:3 t :5 Zoll

pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

pressure:160 t passage width:1200 mm stroke:600 mm Weight of machine approx.:7 t dimensions:ca. 2400 x 1400 x 3400 mm return capacity:16 t Max Working height:800 mm Return Speed:25 mm/sec pestle plate:1670 x 800 mm table plate:1670 x 800 mm table height over floor:800 mm Oil cooling (electric):1,5 kW (max) Engine Output:18 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Travel:600 mm Oil Tank Capacity:300 l

pressure:110 t passage width:1300 mm stroke:1500 mm Weight of machine approx.:12 t dimensions:ca. 2300 x 2090 x 4200 mm return capacity:11 t Max Working height:1500 mm pestle plate:1730 x 1100 mm table plate:1730 x 1100 mm table height over floor:700 mm column diameter:140 mm Thickness of ram plate:100 mm thickness of clamping plate:100 mm Noise Level (Max.):67 dB Color machine body:7035 RAL Color moving parts:2009 RAL Colour other components:7021 RAL Colour of balcony and casing:1021 RAL motor capacity:18 kW Approaching Speed max. :300 mm/sec pressure speed:15 mm/sec Oil Tank Capacity:150 l Siemens Control System:S7 1200

pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

pressure:1000 t passage width:1500 mm stroke:800 mm total power requirement:91 kW weight of the machine ca.:68 t dimensions:3850 x 2900 x 6000 mm return capacity:100 t Table dimensions:1500 x 2250 mm :1500 x 2250 mm table height over floor:1300 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:10 mm/sec :1200 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:12 Zoll

pressure:160 t passage width:1000 mm stroke:800 mm total power requirement:22 kW weight of the machine ca.:13 t dimensions:2300 x 2850 x 4000 mm return capacity:16 t Table dimensions:1430 x 1000 mm :1430 x 1000 mm table height over floor:850 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:15 mm/sec :400 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:10 Zoll

pressure:200 t distance between columns:1900x1200 mm stroke:1000 mm total power requirement:44 kW weight of the machine ca.:32 t dimensions of the machine ca.:4793 x 3365 x 4779 m Hydraulic block:Bosch Rexroth demand for oil:800 l Sliding door front with a closing speed of:300 mm/sec open height:1400 mm Table Height:820 mm Ram Height:1000 mm Lifting capacity:20 t Lowering speed in the empty journey:80 bis 270 mm/sec Press speed:7 bis 25 mm/sec On driving speed:50 bis 170 mm/sec bending stiffness according to standard:0,2 mm Siemens Control System:S7 1200 Monitor:WEG 12 Zoll

pressure:100 t passage width:650 mm stroke:500 mm weight of the machine ca.:10 t dimensions:4800 x 1300 x 2650 mm return capacity:10 t :29 kW Max Working height:1000 mm :10 mm :10 mm/sec. :500 mm pestle plate:600 x 600 mm table plate:600 x 600 mm table height over floor:700 mm :600 l speed rapid traverse:10 mm/sec Oil cooling (electric):1,5 kW (max) Monitor SIEMENS:7 Zoll

pressure:40 t passage width:1000 mm stroke:400 mm Weight of machine approx.:3,5 t dimensions:2065 x 700 x 2905 mm return capacity:4 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:1320 x 600 mm table plate:1320 x 600 mm table height over floor:750 mm Oil cooling (electric):1,5 kW (max) Engine Output:8 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:200 l speed rapid traverse:10 mm/sec column diameter:100 mm :2400 ? Maintenance Balcony:3600 ? :4600 ? Ground tub of lacquered steel:850

pressure:350 t passage width:3000 mm stroke:900 mm total power requirement:75 kW weight of the machine ca.:60 t dimensions:2660 x 5400 x 5700 mm return capacity:35 t Table dimensions:3610 x 1600 mm :3610 x 1600 mm table height over floor:900 mm pre-running speed:230 mm/sec return speed:170 mm/sec :2000 l max. working heidht:1700 mm pressure speed:21 mm/sec speed rapid traverse:200 mm/sec Oil cooling (electric):3 kW (max) :S7 1500 Monitor:WEG 12 Zoll

pressure:20 t passage width:1500 mm stroke:500 mm total power requirement:3 kW weight of the machine ca.:6,5 t dimensions:ca. 2700 x 1700 x 2700 mm Max Working height:1500 mm return capacity:2 t Table dimensions:1500 x 2100 mm :1500 x 2100 mm table height over floor:900 mm pre-running speed:10 mm/sec pressure speed:10 mm/sec return speed:25 mm/sec speed rapid traverse:10 mm/sec :150 l :AW46 Monitor:(WEG) 7 Zoll

pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm pestle plate:600 x 500 mm table plate:800 x 700 mm Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

pressure:20 t passage width:500 mm stroke:250 mm Weight of machine approx.:2,6 t dimensions:1200 x 1400 x 2900 mm power capacity:11 kW table plate:450 x 400 mm Table cut-out:150 x 150 mm table height over floor:900 mm max. working heidht:500 mm Return Capacity:2 t Approach Speed:300 mm/sec pressure speed:50 mm/sec speed rapid traverse:300 mm/sec Travel:250 mm Oil Tank Capacity:250 l Oil cooling (electric):1,5 kW (max) Monitor:Siemens 10 Zoll