2000 ton hyd used for sale

Hydraulics Machine viseJaw width: 130 mmJaw height: 46 mmClamping force: 4 ton. Clamping range: 0 to 220 mmOpening width: max 223 mmGuideway height: 72 mm- 3 clamping ranges adjustable via plug-in pins, 0 to 79mm, 67 to 151 mm and 139 to 223 mmDimensions L x W x H: 535 x 210 x 119 mmWeight: 35 kgvery good condition; used

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SOFabr. No: 124984 year of construction 2017Load capacity 300 kgPlatform size 1250 x 800 mmUsable stroke max. 785 mmOverall height - table bottom 345 mmOverall height - table top 1130 mmEngine power 0.8 kWNet connection 400 volts, 50 Hz- Foot switch for up and down, with emergency stop and key switch for control One- Single scissors with a lifting cylinder- Circumferential safety contact strip with limit switches under the upper frame- Adjustable limit switch for the upper stroke restriction-

HydraLift FX is an advanced aesthetic device that offers non-invasive lifting and skin revitalization. Auction-ID: A7-46406-11

table 500/600 mm

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500 x 600 inside basket diameter 1.500 mm inside basket height 600 mm

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Hydraulic pump 250 BAR 1, 1kW three phase motor, 3ccm/& 8 l container with valves and tray, ready for use. Info under 0170 / 2204056 Mail to fa.raupp@t-online

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

Working width: 5050 mm thickness: 10 mm power: 30 kW space: 2450 x 5600 x 2500 mm weight: 28000 kg

Working width: 4100 mm sheet thickness: 6 mm radius: 100 mm rear gauge: 0-1000 mm power: 18.5 kW space: 4600 x 2200 x 1950 mm weight: 11000 kg

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h

Hydraulic

Cyclone / hydro-cyclone Type: 10 INCH C-650 / C650 New from surplus/stock For more information, see pictures!

Used hydraulic press PHW 12

Hydraulic cylinder filter press Chamber filter press New, used and refurbished Ask us.

AMOB MAH 60/3 Section: 20 cm ³ Power: 5.5 kW - 7 hp Rpm: 11 rpm Ø instrument: 170/108 mm Ø shaft: 55/55 mm Weight: 600 kg Dimensions: 1300x890x1550 mm Nr. 3 motorized rollers hydraulic adjustment top roller Side guide rollers Programmable and displayed top roller Horizontal and vertical working position Pedal with safety device start/stop General information: The AMOB MAH series top roll profile hydraulic bending machines are the backbone of the widest selection of profile curves in the world. The MAH series is perfect for those applications that require multiple passes, where repeatability is paramount. Motorized 3-roller machines are suitable for narrower spokes and minimize material marking. Both horizontal and vertical working positions ensure that, even in the smallest workspaces, a mah series profiling machine will be placed. T ...

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

Hydraulic radial engine manufacturer Calzoni MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 bar Used Husky injection moulding machine, type GL225RS60/50

Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50

Load capacity up to 25,000 kg Grab content from 0.5 m² up to 4 m² Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

used hydraulic unit with accumulator

Printing capacity max. 25 t, table 600 x 600 mm, stroke max. 350 mm

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mm fully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good

Hydraulic tailstock top height 150 mm - 2 stub More: Hydr. Tailstock

Hydraulic unit 250 l, 4 kW, max. 45 bar More: Hydro-aggregator FORTUNA Sperry Vickers, 200 l tank, with various valves pump: G-PA3-25-EK1-20R (see picture)

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

Hydraulic unit 360 l, 2 x 11 kW, 2 memory More: Hydro-aggregate REXROTH DB 250-04-0, 1 memory, various valves Hydro-aggregator REXROTH, 60 l tank, various valves (see pictures)

Hydraulic unit 160 l, approx. 4 kW, various valves etc.

Hydraulic pressure filter, 200bar, 34P-0014, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0014 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude  ...

Hydraulic pressure filter, 200bar, 34P-0016, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0016 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclud ...

7.5 KW

ULTRAPRAS UPV100TT SPECIAL hydraulic press built in 2022 Poland is the perfect choice for a range of demanding cold metal forming operations. This highly efficient and versatile machine can perform such operations as precision bending, profiling, flattening, bending, hole punching and stamping. Inside the robust design, there is a power unit-powered hydraulic piston with a diameter of 220 mm, which performs all these machining processes with a high press force of 100 tonnes. In addition, the entire working area is protected by light curtains, thanks to which the UltraPras four-column press also offers a high level of operational safety. During its service life, the machine has operated for just 595 hours and completed a total of 37042 work cycles. The UPV 100 TT SPECJAL 100t hydraulic press weighs 6500 kg. Technical specifications of the ULTRAPRAS UPV100TT SPECIAL press - maximum pre ...

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile gebrauchte Hydraulikmotoren Danffos OMR OMS OMT OMTS OMV used Danfoss OMR OMS OMT OMS OMV hydraulic motors used hydraulic motors Danffos OMR OMS OMT OMTS OMV 151-0208 125 OMR OMS OMT OMTS OMV 151-0242 80 OMR OMS OMT OMTS OMV 151-0243 100 OMR OMS OMT OMTS OMV 151-0244 160 OMR OMS OMT OMTS OMV 151-0245 200 OMR OMS OMT OMTS OMV 151-0246 315 OMR OMS OMT OMTS OMV 151-0247 250 OMR OMS OMT OMTS OMV 151-0248 50 OMR OMS OMT OMTS OMV 151-0265 50 OMR OMS OMT OMTS OMV 151-0266 80 OMR OMS OMT OMTS OMV 151-0267 100 OMR OMS OMT OMTS OMV 151-0268 160 OMR OMS OMT OMTS OMV 151-0270 315 OMR OMS OMT OMTS OMV 151-0271 250 OMR OMS OMT OMTS OMV 151-0297 315 OMR OMS OMT OMTS OMV 151-04 ...

Hydraulic agregate with Bob and cooling, engine made in Swden 55kW, cubic capacity 300 dm per min, pressure 31,5 MPa, transport weight ca. 800kg. Ready for work.

Description of the chip press: Powerful metal chip press with chip shredder for long turnings. The area of application is the processing of large quantities of milled and turning chips. Materials: aluminum, steel, cast iron Drip pan as oil tank Geared motor for optimal agitator operation Hydraulic Compression Cylinder Hydraulic press cylinder with two coaxial sections Diameter of briquettes 60 mm Automatic briquette length adjustment with displacement transducers Inductive Proximity Sensors Pre-compaction cylinder in conjunction with special compression hydraulic cylinder that compacts the material in the bushing-bulkhead unit Briquette ejection system, consisting of a compression chamber and a bulkhead with special anti-wear treatment Highly efficient closed-circuit oil cooling system consisting of an air/oil heat exchanger Hydraulic system with B ...

ULTRAPRAS WKR70H hydraulic press built in 2021 by the Polish company SAKOMET is designed for even the most demanding cold metal forming operations. The operations, such as precise cutting, stamping, punching and extruding of workpieces, are performed with a force of 16 tonnes using a hydraulic cylinder with a diameter of 100 mm. Induction limiters additionally allow adjustment of the piston advance and retraction limits, making the machine adaptable to the working range of various tools. In turn, centrally beneath the piston is a large cross-cut work table with a 90mm diameter bore. The UltraPras WKR 70H 16t hydraulic press weighs 420 kg. Technical specifications of the ULTRAPRAS WKR70H press - press force: 16 t - piston stroke: 70 mm - piston diameter: 100 mm - maximum working speed: 9.8 mm/s - minimum working speed: 2 mm/s - return speed: 20 mm/s - work table dimensions (L x  ...

SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Fuel tank capacity 0.95 m³ Year of manufacture 1987 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding a ...

Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base

SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Tank capacity 1 m³ Year of manufacture 1991 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent, we ...

Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg

Edeleanu GmbH / Shell Lube Oil Hydrotreater 1 (LHT-1) (1972/2015) Year: 1972 Make: Edeleanu GmbH / Shell Hydrotreating to produce lubricating-manufacturing oils, sulfur-free, few aromatics, light color, color stability (aging). Year of manufacture 1972 Process Design by Shell Process Engineering by Edeleanu GmbH Feed = Paraffinic or naphthenic distillates (range of Viscosity = 2 – 160 cst/40°C) Throughput max. 550 t/d (approved), 600 t/d possible (yield range 72% – 96%) Operational operating temperature = 355°C (Reactor WABT = Weighted Average Bed Temperature) Operational operating pressure = 140 bar 1987 – Capacity expansion of the C-5401 to 550 t/d (previously designed for 400 t/d) 2015 – Revamp to operate with pure Hydrogen Make-Up gas (99,99%) 2015 – New column C-5407 (separation of slops into HTFR and HTTOPP) 2021 – new furnace (F-5401) 2021 – Const ...