126,676 used machines on RESALE, but how to find them? Machine Search
pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pump type: QX 31-020/21-016/21-012 R, power: 5.5kW, flow rate: 29l+23l+18l/min, max. pressure: 3x40bar, oil viscosity: 32-46cSt, usable volume: 300l. On-site inspection is possible.
Weinig high speed planing line 150 m/min with destacking, infeed system and outfeed system with automatic stacking system, Consisting of:, 01. Weinig cross chain transport for wood packages, 02. Weinig tilt hoist, 03. Transport belt for stacking sticks, 04 Weinig cross chain transport, 05 Weinig unchrambler, 06. Weinig cross chain transport, 07 Weinig automatic infeed system, 08. Weinig moulder Hydromat 30 XL, 6 spindles: B-T-R-L-T-B, max. 150 m/min, 09. Weinig transport belt, 10. Weinig outfeed system cross transport, 11. Weinig automatic stacking system, 12. Weinig cross chain transport for wood packages
WEINIG high speed moulder, type Hydromat Super 30-B, Machine specifications:, - Planing width 300 mm, - Planing height 120 mm, - Electric driven feeding system, motor 55 kW, - Feed speed 8 - 180 m/min, Spindle lay-out:, 1. Horizontal spindle bottom, motor 22 kW, 2. Horizontal spindle top, motor 30 kW, 3. Vertical spindle right, motor 18,5 kW, 4. Vertical spindle left, motor 22 kW, 5. Horizontal spindle top, motor 30 kW, 6. Horizontal spindle bottom, motor 37 kW, 7. Horizontal spindle bottom, motor 45 kW, 8. Horizontal spindle top, motor 30 kW, 9. Horizontal spindle top, motor 22 kW, - Front bearing for horizontal spindles 1+2+5, 6, 7, 8 and 9, - Digital positioning for spindle 3+4+8, - Short infeed table, - Bed plates hard chrome, - Automatic lubrication system, - Heavy duty feed rollers 220 mm, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Feed speed frequency contro ...
PRESS DESIGN drive system: hydraulic frame design: C-frame, single sided PRESS FORCES total force (nominal): 12 to SLIDE stroke: 200 mm ELECTRICAL SPECIFICATIONS mains voltage: 380 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 1000 kg Hour counter: 30'181 h last safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm
Manufacturer: Peak Model: Precision Hydrogen 200cc 100–230V Year of Manufacture: 2020 Type of Machine : Hydrogen generator Specifications: - Voltage: ~100/230V - Frequency: 50/60 Hz - Current: 6 Amps - Maximum Output Pressure: 100 PSI Find more here - / Contact us at -
DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw
DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw
Key data: 250 t
Inv. Num. : 8652 Type: ZHS 250 Producer: ŽDB Hydraulika Generated: 2000 Parameters: Compressive force: 250 t Table length: 3500 mm Table width: 1200 mm Stroke: 700 mm Ram dimensions: 3500 x 1200 mm Working speed: 13-60 mm/s Machine height: 6000 mm Machine length: 3000 mm Machine width: 5000 mm Machine weight: 60000 kg
Key data: 1200 t, 1000 mm
Hydraulic Press Gigant 1200 ton Year of construction: 1993 Dimension table: 3700 x 2700 mm Dimension lower table: 3700 x 2700 mm removable Light max: 1590 mm Light min: 610 mm Slide stroke: 1000 mm Cushion stroke: 400 mm Side upright clearance: no
Suitable for John Deere 4400 and 4500 telehandlers, 13 teeth with 20.5 mm shaft diameter
SATRIND DUAL-SHAFT HYDRAULIC SHREDDER K10/50, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.000 x 850 mm ca, 2 counter-rotating steel shafts, NEW Knives, Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, NEW electrical control panel with PLC and connection for remote assistance, inverter, alarms,, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 70 days ca, conditions: reconditioned, type: K10/50, Power: 37 kw
NEW - year of construction 2022, with Lehnhoff MS01 mount, incl. 1 chisel, 105 kg own weight, suitable for 1 - 2.5 t excavators
used hydraulic power unit with accumulator, for the operation of a screen changer
Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Hydac, hydraulic unit S914/1999 22 266 -Motor: ADDA 1.1 kW/1380 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Accessories: see pictures -Dimensions: 240/300/H540 mm -Weight: 36 kg
hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / pressure accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm -Tank capacity: approx. 240 liters -Pressure display: up to 250 bar -Individual components: pressure accumulator/hydraulic tank/filter/valves see pictures -Number: 2 units available -Price: per piece -Dimensions: 1060/820/H1530 mm -Weight: 738 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Rexroth Hydronorma, hydraulic unit from Krauss HS 50 injection molding machine -Pump: Type 1PV2V-16/50RA01 MC160A -Motor: Bauknecht 7.5 kW / 1440 rpm -Individual components: see images -Dimensions: 790/340/H400 mm -Weight: 133 kg
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Rexroth Hydronorma, hydraulic unit -Hydraulic pump: Rexroth PV2V3-20/25R1MC 40 A1 -Motor: AEG 3 kW / 1420 rpm -Individual components: see photos -Hydraulic tank: tank capacity 120 l, with level indicator -Dimensions: 820/520/H880 mm -Weight: 232 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Aggregate: unfortunately without type designation -Hydraulic reservoir: Tank capacity approx. 7 l, with pressure gauge return line -Pressure: bar -Flow rate: l/min -Individual components: see photos -Dimensions: 350/240/H570 mm -Weight: 15.1 kg
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats/blind production -Housing: material VA -Motors: 5x elsto 1.5 kW -Pressure: up to 250 bar -Flow rate: 10 l/min -Individual components: see photos -Dimensions: 2100/660/H1040 mm -Weight: 554 kg
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats / blind production -Housing: material VA -Motors: 7x elsto 2.2 kW -Pressure: up to ca. 250 bar -Flow rate: ca. 10 l/min -Individual components: see photos -Dimensions: 3000/560/H1000 mm -Weight: 380 kg
Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Integral Hydraulik, hydraulic power unit with pressure switch -Pressure: up to 30 bar -Flow rate: 6 l/min -Pressure switch: Telemecanique XMG-B140 -Hydraulic reservoir: with pressure accumulator and level indicator -Individual components: see photos -Dimensions: 465/260/H510 mm -Weight: 48 kg
Number of pistons 3 Table dimensions ( x-y/mm) 2210 x 1830 Slide Dimensions X-Y (mm) 2210 x 1830 Stroke (mm) 915 Cushion number 1 Cushion type hydraulic Cushion stroke (mm) 406 Cushion power (ton) 250 Weight ( ton) 100 Machine Conditions ce marked
pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic
pressure:125 t distance between columns:2100 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table area:2230 x 1300 mm die cushion pressure in table:63 t die cushion stroke in table:60 mm surface of drawing cushion:1000 x 900 mm table height above floor:1050 mm side window:1000 mm ram surface:2100 x 1000 mm speed down:50 mm/s speed up:50 mm/s working speed:10 mm/s oil volume:410 l height above floor:5,95 mm power requirement:22,0 kW Weight:31,0 t Dimensions (WxDxH):3,1 x 1,7 x 5,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic foundation pit:not necessary
pressure:200 t distance between columns:1400 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1100 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:150 mm die cushion area:700 x 700 mm capacity of ejector in ram:10 t ejector stroke in ram:50 mm table height over floor:930 mm side window:770 mm ram surface:1300 x 1100 mm speed down:400 mm/s speed up:410 mm/s working speed:20 - 50 mm/s return capacity:30 t oil volume:1350 l power requirement:70,0 kW weight:23,0 t dimensions (WxDxH):4,5 x 3,0 x 3,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic ejector in ram:hydraulic foundation pit:not necessary
Hydraulic fork positioner 550-2000 mm Fork positioner hydraulically by 550-2000 mm, Stacker, has been in use at 2.5 to can be mounted but on any truck, mast, front loader, etc, with integral Sideshift. Adapter plate with mount slots for cultivation. Dimensions available upon request. Adapter plate surface area approx. 715 x 650 mm. Valve block hydraulic pump can be supplied. Sale and mistakes are expressly reserved. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...
used
Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.
WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications: - Planning capacity 220 x 120 mm - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape
Load capacity up to 12,500 kg Gripper content of 0.5 m³ up to 5 m³ Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.
Installation consisting of 2 lifting tables (in the form of a staircase) each with 1,500 kg load capacity, lifting height: 1.2 m each, incl. base for the higher lifting table (1.5 m high), hydraulic unit and control cabinet. Tables can also be used individually.
16 stations, max. 12 mm , reel, ring straightener, Knoll scratch tape foerderer, various hoistand and spare parts
Feed sled unit for 2 spindles, suitable for conversions or adaptations
Feed sled unit hydraulic, various spindles, for conversions or adaptations
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Collmann 23558 Lübeck Type : Hydo 24, chocolate dosing machine/chocolate depositor YOM : 2001 Output : up to 25 Takte/min We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex warehouse Hess. Lichtenau (EXW),unpacked
maximum number of results exceeded
please refine your search
