2000 kw gas used for sale

General SKU001C001 MakeUltrafilter International AG Haan TypePG-EG 0768 No.143458-01 Year of construction2001 LocationBarneveld Specified Features - Candle filter Material finishPolished Pressure Working pressure16 Bar Main Features MaterialStainless steel Surface0.6 m2 Candle filters Candle filtercheck Cartridge filter, pharma execution Filter surface0,6 m² Number of candles4 Candle sizesDia. 60 x 750 mm Vessel sizesDia. 260x800 mm MaterialStainless steel 1.4571 (316Ti) Information Floorspace0,7 x 0,5 m Total height1,4 m Weight70 kg Extra Specifications- checkthis item is unused - 4 cartridges (not included) - capacity: 1080 m3/h at 1 bar - Max temp 200°C - Max 16 bar Candle filtersUltrafilterFilters > Candle filtersBrand > Ultrafilter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippin ...

A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible.

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Cooking kettle Kerres FKK 250L, Natural gas heated, power 12kW, el. Connection 230V, Dimensions of kettle inside approx. 69x80x46cm, Total dimensions LxWxH approx. 95x125x118cm, weight approx. 344kg, older device, good used condition, functional, lid spring defective

Closure conveyor, Fabr. Gassner, 1 basement for crown caps with magnetic vertical conveyor, as well as 1 basement for screw caps with inclined belt stud conveyor; with sealing distributor diverter for crown corkers and screwers, 15 m conveyor belt, emptying pipe, control cabinet, dismantled and stored

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

Key data: 420 KW, 400 V

Kuntschar und Schlüter (Wolf) Gas CHP GTK 382K Gas electricity and heat generators from 2013, 64,000 operating hours, with control, cooling and two silencers. Engine in need of overhaul. 382 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 355MA4-B, 680 KVA Manufacturer: Kuntschar and Schlüter (Wolf) Model: GTK 382K Type: Gas CHP Serial Number: 0094 Power [KWel]: 382 Engine: MAN E2842LE322 Engine power [KW]: 420 Year of Make: 2010 Hours: 64,000 MarelliGenerators MJB 355MA4-B AC Generator Manufacturer: MarelliGenerators Model No.: MJB 355MA4-B Type: AC Synchronous Generator Serial Number: MJB3532L014M0 Power [KVA]: 680 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 981 Speed [1/min]: 1,500 Year of Make: 2013 Weight [kg]: 1.780

Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomod ...

General SKUR0365 MakeBuss SMS LocationBarneveld TypeRieselfilm Gaskuhler Pressure Working pressure shell4 Bar Working pressure tubes0.5 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface3.15 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Verticalcheck Heating surface3,15 M2 Number of tubes:25 Tube diameter44.5mm Tube length1000mm Wall thickness tubes2mm Max. temperature200 degr. C Shell diameter400mm Shell length1000mm Information No.22.11.6351/3 Year of construction1994 Floorspace2,0x0,8 M Total height0,8 M Weight500 KgCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther fe ...

grinding diameter:200 mm grinding length:320 mm total power requirement:3,5 kW weight of the machine ca.:9 t space required L x W X H:5,28 x 4,5 x 2,4 m max. wheel dia.:200 mm Spindle drives Arena Siemens For Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm

Gaspardo 6m seed drill with Howard-Nordsten seedbed combination, Technical specifications:, - Working width: 6m, - approx. 120ha used, - Sowing technology: Disc coulter with pressure rollers for precise sowing, - Carrier: Howard-Nordsten seedbed combination

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

technical data: Track gauge: 980 mm Support height: 420 mm reinforced execution circulating chain Drive by worm gear motor with built-in slip clutch Kippstool adjustable stem holder Cable and cable balancing

technical data: Make: Möhringer Type: KW 2h Types No:: 126 450 Track gauge: 980 mm Support height: 430 mm electr. Page verst.: yes Feeding: yes Wooden feeder: from the left Drive: 0.37 kW Wheel diameter: 200 mm

technical data: Type: KW 1 vek Types No.: 126 200 Track gauge: 800 mm Support height: 410 mm Wheel diameter: 180 mm With electric side adjustment

VESPA 45/80/37 kWt VGA Cutting mill for plastics 37 KW, 400-700 kg. Model VESPA 45/80/37 kWt VGA Throughput Kg/h: 400-700 Rotor diameter мм: 450 Rotor knife quantity/dimensions piece x mm: 6×400 Stator Knife Quantity/Dimensions Piece x mm: 4×400 Engine kW: 37 Weight Kg: 2300 VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with precision machining and surface finish – Good accessibility for cleaning and maintenance – Electrical equipment with SCHNEIDER ELEC ...

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. 40/80/30 VGA granulator for plastics 30 KW, 350-600 kg/h. Model: VESPA 40/80/30 kWt VGA Throughput Kg/h: 350-600 Rotor diameter мм: 400 Rotor knife quantity/dimensions piece x mm: 6×400 Stator knife quantity/dimensions piece x mm: 4×400 Motor kW: 30 Weight Kg: 1960 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 1520 B-1430 C-2420 D 1910 E 820 F 500

White temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test room volume: 500 ltr. Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of construction: 1990 Condition: used Complete plant closure, large selection of mezzanine, pallet racks, shelve ...

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request

Qty. 1 Second-hand aluminium strip casting line – stopped in 1/2020 Manufacturer: Shinkwang Type: 2 Roll Casting Built: 2013 Strip Width: 420 - 1,010 mm Strip Thickness: 5∼7 mm Line Speed: 2 m/min (max) Coil Weight: 7,000 kg (max) Power: 45 kW (DC) Cooling Water: 550 m³/h

Emulsion fission system, oil-water separation system (for the de-oiling of condensation in compressors) The cost-effective and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. that cleaned water complies with the legal Rules on channel discharge

50/80/45 kW VGA Cutting mill for plastics 45 KW, 500-800 kg/h. Insertion opening mm: 820×650 Rotor diameter mm: 500 Throughput kg/h: 500-800 Rotor blade quantity/mm: 6 x 400 Stator knife quantity/mm: 4 x 400 Engine KW: 45,0 Dimensions LxWxH mm: 2400x1700x3070 Weight kg: 4500 With material conveying blower 7.5 kW and BigBag filling station.

Shrink Wrap/Foil Sealing

Key data: 300

Dürr Eco+Energy ORC 300 HT. 2016 - 500 Hours Model: Eco+Energy ORC 300 HT KWK Year: 2016 Hours: 500 Capacity: 300 kW Hz: 50 Voltage: 400 V Scope of supply: Complete ORC with oil pump skid. Price: €240,000 Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange. com

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - incl. switch box with motor protection and contactor, - incl. oil pressure hose - incl. 400V connection cable with CE plug - Test: Smooth pump operation and immediate delivery - Can be plugged in and used immediately Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is n ...

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - Including conversion for connection of an oil supply line, - Test: Smooth pump operation and immediate delivery Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the pr ...

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

winch, lifting winch, construction winch, anchor winch -mechanical winch -Holding force: 300 kN -with: freewheel and mechanical brake -Drum: Ø mm -Operation via: hand lever -2x winches available: 1x left, 1x right Price: per piece -Dimensions: 1140/750/H1120 mm -Weight: 760 kg/piece

Fan filter, fan line, air cooler, control cabinet fan, fan -Manufacturer: Sheng Kwei, fan fan -Engine: Type SK205AP-11-1 -Dimensions: 205/80/H205 mm -Weight: 2,6 kg

wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer -Manufacturer: KWH VEB, wet mixer with ceramic drum -Type: 2841.5.7521 -Drum capacity: 100 liters -Drum speed: 38 rpm -Motor: 1.1 kW -Dimensions total: 1520/670/H930 mm -Weight: 487 kg

Auxiliary vehicle, type KW1VEK Bearing No.: akw885 Make: Möhringer Year of construction: 1997 Part number: 126 422 00 Specifications: Gauge: 980 (mm) Support height: 420 (mm) - Reinforced design - Circumferential chain - Driven by worm gear motor with built-in slipper clutch - Tilting stool - Adjustable trunk holder - Cables and cable balancing

; Power [PS]: 136; Gross weight [kg]: 13000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x500kW - DC socket: 3x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x500kW; Water Tank Volume [l]: 800

; Power [PS]: 61; Gross weight [kg]: 4000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x125kW - DC socket: 1x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x125kW; Water Tank Volume [l]: 300

; Power [PS]: 61; Gross weight [kg]: 7500; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x375kW - DC socket:2x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x375kW; Water Tank Volume [l]: 650

; Power [PS]: 61; Gross weight [kg]: 2800; Engine: Yunnei / DEF30CAA5; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC socket: 1P, 1x16A, 1x32A; 3P, 1x63A - 1P Socket; Water Tank Volume [l]: 150

; Power [PS]: 41; Gross weight [kg]: 2800; Engine: Yunnei / DEF20CFA4; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC socket: 1P, 2x16A, 1x32A; 3P, 1x63A 1P Socket; Water Tank Volume [l]: 100

; Power [PS]: 27; Gross weight [kg]: 1350; Engine: Yunnei / DEF20CFA4; Accessories: Tanker, Battery, Control Panel, Input: 1P Socket - Busbar , Output: 1P Main load socket - AC socket: 1P, 2x32A, 2x16A - Busbar - 1P Socket; Water Tank Volume [l]: 100

; Power [PS]: 98; Gross weight [kg]: 3000; Engine: Battery System: LIFePO4; Accessories: Battery, Control Panel, Power connection Input:, - AC socket: 3P/5W, 1x60kW, 1x30kW, - AC copper: 3P/4W, 60kW, - DC socket: 60kW, Power connection Output:, - AC socket: 3P/5W, 1x60kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 60kW

Hydr. Welding Rotary and Tilting Table - Four Axis - Welding Manipulator Specifications: - Max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. table height in horizontal position approx. 1070 mm - Face plate mot .rotatable + swivel or tiltable - Face plate horizontal + vertically movable, travel distance 1250 mm - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Handheld remote control for speed regulation - E. footswitch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

We offer here the completely overhauled engine replacement CAT C13,Engine number:KWJ04492,Arr:366-0290 complete with starter, alternator + EGR cooler. If you are interested, please contact: MIW GmbH Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281 950583 Mail: infoatmiw-zeven

Qty. 1 Second-hand (PUR/PIR) sandwich panel Mfc.: PIR/PUR Firing System & Profiling Press Line – Siempelkamp GmbH Terminal System – IL Kwang Metal Built: 2016 Type for sandwich panel: Outer side – Color coated steel strip Inner side – Hard Polyurethane / Polyisocyanate Use for: Construction Panel for Wall & Roof Product size: 14.0 m x 1.22 m – L x W Thickness: 50 mm, 75 mm & 100 mm Upper & lower steel strip: 1220 x 0.45 – 0.75 mm – W x T Coil weight: 10 T

2012 Chiron DZ 12 KWM HS 328-03 Profile CNC machining centre Chiron milling machine - double-spindle - with pallet changer - HSK-A63 Accessories and tools are not included. We still have a few holders (shrink fit chucks) that we can provide. A chip conveyor from Knoll is included, as well as a cooling tower from DeltaTherm. Technical data Year of construction 2012 Axis travel: X 550 / Y 400 / Z 360 mm Spindle distance in X-axis: 250mm Weight: 7700kg Tool magazine: 16 places per spindle Tool holder HSK-A63 Fanuc 31i-A5 - 5-axis contouring control Fanuc tool life monitoring Integrated workpiece changing device IWW 0/180° Spindle speed 15000 rpm, max. 45Nm Speed acceleration / deceleration from 0 to 12000 rpm in 0.6 seconds Chip conveyor with scraper belt Coolant system KF 150/FKA500 Chiron maintenance instructions on screen Operating hours and parts counter Oil-fre ...

Used semi-automatic tablet/capsule counter, produkcji firmy Kwang Dah z Tajwanu, model KDC-101. New: 2012 Capsules or tablets are counted in the machine by a sensor measuring the filling of the bottles. The sensor ensures accurate counting and dosing of tablets, lozenges, pills or transparent capsules. The machine is equipped with a compensator and a sensor that provides automatic adjustment according to the collected powder in the sensor window. Power supply: AC 110V/230V, 50Hz, single-phase, 5A Machine weight: 70kg Machine dimensions: 88 x 76 x 70 cm（length x width x height）

Height=1.66 m, Overall length= 1.28 m, Overall width= 3.33 m, Net weight= 570 kg,

Planetary Gearbox PCEF53.5-X1 New suitable for Doppstadt DW 2560 B, DW 3060 Standard, mobile & stationary not suitable for Biopower models (42 teeth on the roller!) Fully assembled with output flange and driver Warranty: The seller assumes a guarantee of freedom from defects for a period of 12 months from the date of delivery. The prerequisite for liability for defects is the professional installation of the gearbox by an authorised workshop.

This 4-axis CHIRON FZ 15 KWM HS vertical machining center was manufactured in 2012. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 KWM HS machine we have for sale. Contact us for more information.

Elec: 230V / 50HZ , Weight: 150 kg, Min max weight (g): max 300g, Minimum maximum weight (g): max 300gr, Pack min: 100 / min, Minimum maximum temperature: +5°C - 40°C, Pack mn: 100 / min, e: 0.1g, Cadence: m/min: 27 m / min, Min pack: 100 / min, Transfer direction: from left to right, Min max temperature: +5°C - 40°C, Cadence: m / min: 27m/min, Direction of transfer: from left to right